Sou do Brasil e faço martelinho de ouro esse cara e top de mais
@georgef11765 күн бұрын
Great work. I just got into paintless it’s an amazing tool. You are definitely a master thank you for sharing your knowledge.
@dm196097215 күн бұрын
utterly amazing!
@hunkydude3226 күн бұрын
not every household in America has that set up.
@Siambaton7 күн бұрын
Excelent...
@hassenmaddoui90567 күн бұрын
Magic
@straightlines74328 күн бұрын
Looks great and on silver . May I ask where did you get the large nylon board you pulled from rear of car from ? How did you attach it to the stap hole with link ? Clamp?
@DiTuttoUnPo728 күн бұрын
💪💪💪
@kevinborden24778 күн бұрын
Awesome repair Brice! Amazing result!
@mav89038 күн бұрын
How many hours and how much? Incredible results.
@sergiikorytskyi2168 күн бұрын
Perfect job.👌🔥🔥
@pdr408 күн бұрын
Отличная работа Брайс 👍
@dentremover019 күн бұрын
Fair play Brice. If you remove the plastic triangle there’s a decent hole there which you can also use 🙌🏼
@cfldentrepair9 күн бұрын
Thanks, Martin. That was my initial plan. However, being that this is the convertible, the 3/8” hole is closed off and the window regulator is directly behind it. Even though this looked pretty straightforward, I still had to work for this one, as the access was tricky. Thanks for stopping by to check it out and hope all is well across the pond.👍🏻
@dentremover019 күн бұрын
@@cfldentrepair I did think you’d already know this! And knew there was a reason for going in the other way 🙌🏼 I bet it was nice fixing a small dent for once?! All good here, il see you in January at MTE 👍🏼
@xiiMaYHeMx13 күн бұрын
Got recommended by my brother and he’s really good , so if he wants me here I know damn well this is where I wanna be 🫡
@MightyMick8815 күн бұрын
Dude you made that look easy, but I can't imagine how hard that repair was to do, I would have thought the paint would flake off. Great job.
@cfldentrepair15 күн бұрын
@@MightyMick88 incredibly challenging task, but I truly wanted to prevail for this customer, especially with the bike being so new.👍🏻
@estevim73816 күн бұрын
Were are you located?
@cfldentrepair16 күн бұрын
Central Florida
@fatsk8er6217 күн бұрын
Ok definitely not paint less cause you literally have to grind off paint on the inside pdr requires zero paint removal
@cfldentrepair17 күн бұрын
@@fatsk8er62 cheer up, dude.
@fatsk8er6217 күн бұрын
@@cfldentrepair yeah your right its just my work mindset cause i do bodywork for a living
@agistan776418 күн бұрын
My brain refused to understand but the process absolutely worked, though I had to hit my thermoflask a bit more, but result was still very fast. Thank you for saving me the headache and trying to find dry ice.
@CS-ek4zi21 күн бұрын
what is the average cost to remove a dent in this tank?
@cfldentrepair21 күн бұрын
Typical paintless dent repair costs on motorcycle gas tanks/fenders can range from $200 all the way up to $2-3K based on size and factors considered.
@CS-ek4zi21 күн бұрын
@@cfldentrepair thank you for the quick response was just trying to get a ballpark figure as I’m looking to buy a 2018 deluxe that has two small quarter size dents in the side of the tank I need to know what it would cost in order to negotiate sale price
@its87323 күн бұрын
Thanks bro❤
@dazzassti23 күн бұрын
Those tires would see you losing your licence in the UK lol. Amazing job BTW 👍
@Jesus-xv8xb25 күн бұрын
💀💀💀
@mishutkin10126 күн бұрын
Awesome work! Got a dent in the exact same spot on my silverado. What's the cost to get something like that pulled out?
@IsaacQuaicoe-nl4zv27 күн бұрын
Good job😅
@user-gg1ic7mx6u28 күн бұрын
How much does a repair like that cost
@cfldentrepair26 күн бұрын
If I can recall, this was an insurance repair that was about $4K.
@ThunderKing1963Ай бұрын
bullshit
@cfldentrepairАй бұрын
Nope, but I will certainly take your disbelief as a compliment. Thank you! 👍🏻
@johnyaceyko9775Ай бұрын
I haven't quit failing, cause I did win a few. Thanks for sharing.
@rooster4070Ай бұрын
Have you ever used the flat tip snake as a dolly with a hammer on sharp creases?
@LucasEsteban888Ай бұрын
Muchas gracias! Pude arreglar mí botella térmica de acero inoxidable que había comprado hace solo 3 días!
@guillermolopez2501Ай бұрын
I looking for the best repairs kit for Harley davidson gas tank if you have any idea please let me know, thank you
@GfefhhyFewghbb-lh3uvАй бұрын
Яхши чикди ,менхам шундай иш киламану лекин хозир иш жойи топилмаяпди .
@MyGuyKirbyАй бұрын
very impressive Brice, was that stretch pole used first, air or hydraulic? You seem to always win and be willing to try and exceed customer's expectations.
@highcaliberpaintlessdentre7201Ай бұрын
Bada$@ Brice.. Amazing as always
@Francedsp.Ай бұрын
Amazing 😮
@cfldentrepairАй бұрын
Thank you 🙏🏻
@abdalahalhosne5080Ай бұрын
Woow amazing job as always mate 👏
@cfldentrepairАй бұрын
Thank you 🙏🏻
@samg5543Ай бұрын
nice work for sure, but the whole side wouldn't necessarily need paint if blended properly.
@samg5543Ай бұрын
I'm wondering if that aluminum cracked under the dent
@cfldentrepairАй бұрын
Cheer up, dude.
@jahskl10Ай бұрын
Need this exact job in Miami
@RodrickManning-sx5voАй бұрын
Enjoy your work. Where did you get your tool bender?
@benjaminwilliams3568Ай бұрын
W O W, That is amazing repair work that you did. You make a very good point that just because the vehicle is an EV. It can still have body panel damage repaired at the impact location. I am still trying to understand how on the Rivian Truck "the rear glass is one-time use". WHAAAATTTT?!?!?! If rhe glass is not damaged and is removed in lieu of structural repair, why can't the glass be cleaned up and reinstalled? Can you please explain this??? Great vid Your work is fabulous.
@drdentrepair5530Ай бұрын
I will join the customer in being “blown away” Well done 👊🏼 my friend.
@straightlines7432Ай бұрын
Looks perfect. Brice is there access factory holes in the wheel house area? Wondering where you got access to quarter?
@cfldentrepairАй бұрын
Thank you. The trim mounting holes are 3/8“.👍🏻
@TheCarCrazyGuyАй бұрын
Excellent work!
@danielpowell4755Ай бұрын
Good job and beautiful color I am going to paint my Chevelle that color.
@sergiikorytskyi216Ай бұрын
Wow!!!! Perfect Brice! 🔥🔥🔥🔥
@jaiminorАй бұрын
Phenomenal repair as usual. Superb!!!👏🔥🔥🔥
@MyGuyKirbyАй бұрын
I would have thought it was too far for most PDR tools but you did AMAZING results and most techs would have stopped way prior to 8-hours
@gostodemaisdaroca4052Ай бұрын
Usually I save that first good without any of this,just propane torch and something to cool it off before tapping.
@cfldentrepairАй бұрын
With all due respect, a propane torch isn’t going to shrink metal without first damaging the outer paint coat. You need isolated high heat to the back side to get the metal to glowing red temp without burning the paint. That’s exactly how these machines work.
@danka1815Ай бұрын
How much does it all cost ?
@cfldentrepairАй бұрын
Typical hail claims can go anywhere from $2K to $20K depending on the severity of the damage. Industry software/guidelines are used to determine dent count, size, removal & installation of parts and additional factors that apply per panel. 👍🏻