3 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
4 жыл бұрын
Пікірлер
@myhomelab Ай бұрын
I want 12v load with wifi it can be work with 12v?
@JoaquinRaggio-bu2kn 4 ай бұрын
it works only in the local network or its possible to control through internet out of the network?
@olegdasha6518 4 ай бұрын
How many remotes can be connected to that switch??
@massshah 4 ай бұрын
where is that brown wire going to
@johnnyboy0069 5 ай бұрын
Will this work with a 5 volt feed to the 7-32 v terminals. ??
@WilliamAshleyOnline 5 ай бұрын
You know its good when it still powers on after 30 years. Should probably open this up and look at the caps...... if it ain't broke. Even the LCD is still as new in brightness... again these things are made to a relatively long lasting quality. Knock on wood.
@martinlawes1 6 ай бұрын
Can I control 12v leds with this and which 2 connections would I use, thanks Martin
@chestiitari9531 8 ай бұрын
ingenious way to use the switch input of the sonoff. you can connect a 220 RF receiver and is spot on. can you also connect a normal switch to the S1 S2 ? that would make it perfect( do not know why they do not have a RF one with switch input, i used a RFR2 but is lacking that, only present on wifi controlled one)
@subratosardar1104 8 ай бұрын
This mixer price
@AnnoyedOldTypewriter-un6qw 9 ай бұрын
Were will i get a set second hand?
@squeakmillward Ай бұрын
I have 2 but i want £300
@bigbirdmusic8199 10 ай бұрын
An overview doesn't literally mean a view over the product.
@KandC-t6u 7 ай бұрын
lol😃
@marionichilo7531 10 ай бұрын
Hi. do you know if there is a Bluetooth one. would like to use it on my van for a simple alarm. one side when doors open the horn goes off. thanks
@MMSound-zl4eo 10 ай бұрын
только англичане могли сделать такое дерьмо.
@savugaming399 11 ай бұрын
Hhindi me settig video
@savugaming399 11 ай бұрын
Hhindi
@kbalabha 11 ай бұрын
The eWelink app does not recognize the device even when connected to a 2.4Ghz WiFi
@mariojsworld Жыл бұрын
Nice tour.
@BIG-NEPENTHA Жыл бұрын
Bellissimo giradischi revac rg2000 gli ho usati per oltre 20 anni in discoteca sempre perfetti ottimi molto precisi adatti alla musica afro funk perché ha molta regolazione di velocità davvero ottimi
@enghamedhamdy6670 Жыл бұрын
How much is it now , can you send it to Egypt 😊 thanks
@thatsentertainment5602 Жыл бұрын
Is it a 3 or 2 head tape deck
@Taxandrian 8 ай бұрын
2-head, double capstan (tip: if you don't see a 'monitor' button/switch, it's a 2-head deck 😉)
@thatsentertainment5602 8 ай бұрын
@@Taxandrian Thanks for letting me know
@Taxandrian 8 ай бұрын
@@thatsentertainment5602 No problem 🙂
@modgrip805 Жыл бұрын
Lovely song. I have the MT44D. Do you know the differences? 👌
@1991santi Жыл бұрын
Precio en soles
@randallharley6567 Жыл бұрын
Maybe show me how to pair it😮
@succduc 4 ай бұрын
If your one is not pairing try an older phone. My S23 ultra did not work so I used a S9 instead and it worked. Also try going into pairing mode in the app the open your WiFi settings and refresh then go back to the app while it's trying to pair and it'll eventually find the device
@olddanb1 Жыл бұрын
Hi LeOnline. Excellent info, thanks very much. But I'm still confused. Can this device go in line on the negative side of a 12v battery to dissable a running generator engine? Or could I fit it in series to disable the fuel pump so that the engine runs out of fuel and stops that way? This is a stopping event that i want to create. Not a starting one. Thank you.
@sonysoni5079 Жыл бұрын
Hi. Thanks for this great video. I have one question about this Behringer mixing console. Can you please tell me, how do you like this console after all this time, how good is a build quality, particularly pots and faders. Does it make "analog sounding" mixes when you summing same tracks through it, compered to lets say REAPER or some other DAW internal digital mixer. Does it have its own strong sonic character, or is rather clean and clear like Midas or some other high end mixer. Sorry on my bad English.
@TheOyelec Жыл бұрын
Hi, the mixer if in good working shape Is still a good buy. It's got a lot of routing options. The led bar Is nice and gives you a good visual of what's going on. The pre amps are clean and of good quality. If you find this desk at a bargain price ,go for It 🙂
@goldvinylcreations4492 Жыл бұрын
Nice video! Can you connect direct the alarm sensors (pir or door sensor) from degoo (433mhz) to sonoff RF????
@303-e5r Жыл бұрын
what is the right setting for the tonearm weight? thx
@nathantaylor120 Жыл бұрын
I had one of these in the late 80`s and it ripped! Such a great punchy amp. Worked well in the bedroom quietly practicing and held it`s own on stage too.
@leonline3424 Жыл бұрын
Yep very punchy indeed, now i don't have this amp anymore, i've replaced it with an Ashdown , still British just as i like them :)
@jdeniro1844 2 жыл бұрын
Is there a big difference between the gl2800 vs gl3300???
@leonline3424 2 жыл бұрын
Hi, not really, the main difference would be the optional meter bridge and the different matrix layout in the master section, i do prefer the layout on the GL2800. Sound wise i don't know if they use the same mic pre amps, but what i can say is that the GL2800 preamps are top notch for both live and recording!
@andrewtremblay5697 2 жыл бұрын
If I was to power a 12v LED light through this where do I plug the wires into?(
@leonline3424 2 жыл бұрын
In the description you will find the links to the wiring schematics ;)
@jcody7936 2 жыл бұрын
i subscribed just because this video was EXACTLY what i needed. thank you! i wonder if the wiring is the same for a 2 channel
@leonline3424 2 жыл бұрын
Thanks, yeah in the end it's just another channel so you just replicate the first one, get the power from the first contact too.
@whocares8770 2 жыл бұрын
Got same module. Has power, connected tonapp, can control. But device does nothing. I've tried all 3 contacts. Device works fine direct to battery.
@leonelektronik9105 2 жыл бұрын
Another complete waste of time. Real bullshit.
@user-od3rl5mc 2 жыл бұрын
Is it normally open or normally closed? What way would you recommend installing for an immersion ....... At the fuseboard or an enclosure near the Immersion itself? Any recommendations?
@leonline3424 2 жыл бұрын
N.Open, the contactor near the Immersion but in a well protected waterproof enclosure.
@dhky81 2 жыл бұрын
Can this method be used to switch between 2 amplifers that are connected to one set of speakers or will it burn out?
@leonline3424 2 жыл бұрын
Hi, would you be swithcing the amps off and on? Beware that this has 2 single contacts, but one would be open (off) while the other closed (ON) and viceversa!. I don't think it's suited .
@fletch5264 2 жыл бұрын
Can these be flashed with Tasmota?
@leonline3424 2 жыл бұрын
I don't think so.
@bsnwyase 2 жыл бұрын
Hi, great video. Would this also work for the sonoff 4CH PRO version for multiple pumps / lights etc.
@leonline3424 2 жыл бұрын
yes as long as every channel has it's seperate contactor ;)
@morrisman64 2 жыл бұрын
Thanks for this video very helpful
@RetroAmateur1989 2 жыл бұрын
So, it can be used as a regular soundcard? How does it stack up to an SB live?
@leonline3424 2 жыл бұрын
Hi, yes it has an indipendent 16 bit output. Sound quality is more than fine. It doesn't have all the bells and whistles of a classic SB driver , but to be honest i've never needed all that bloatware . In the past i've used it as a stereo gaming device and the sound was great. Just don't use a crappy speaker system if you want it to perform as it should ;)
@RetroAmateur1989 2 жыл бұрын
@@leonline3424 Thanks. I have one(found in a case in the side of a garbage bin), and I needed an era appropriate soundcard for a retro build I am doing, and the breakout box adds to the fancy factor. I just didn't know if it could be used like one.
@leonline3424 2 жыл бұрын
@@RetroAmateur1989 don't be fooled by the age of the card, it came out as a professional sound card and still holds up to many modern quality audio cards. You can even go a level higher and use all of it's 8 mono outputs in ASIO mode to drive an elaborate suorround set up.
@leonline3424 2 жыл бұрын
@@RetroAmateur1989 The stereo Monitor 3.5mm stereo socket features a 16‑bit/48kHz oitput, the 8 mono outputs can go up to a 24 bit depth/ 96kHz and last but not least there is also a spdif digital output that supports operations up to 24‑bit 96kHz ! It's a beast
@leonline3424 2 жыл бұрын
if you want a pro review from the time it came out here it is: www.soundonsound.com/reviews/terratec-ews88mt
@markymark9407 2 жыл бұрын
Very nice,clean set up! I’d love a drum kit lol mrs said feck off
@leonline3424 2 жыл бұрын
Thanks, maybe i have too many drum kits , tell the wife it's not fair lol
@markymark9407 2 жыл бұрын
What are the 2 adjusting pots used for next to the pitch slider? Is there a default setting these and is it normal to have to slide pitch slider to correct the speed, can’t just leave on “0” ? For both 33 + 45?
@leonline3424 2 жыл бұрын
The two adjusting pots are for fine tuning the 33 and 45 speeds, leave them as they are . The slider is for mixing and matching beats between 2 turntables. Normally it should be set halfway for normal playback ;)
@whiiteshirt7192 11 ай бұрын
@@leonline3424 I have this DLP1R turntable and I have to push the pitch slider to +2 in order to stop the platter from playing slow (the correct speed shows the 'red' dots on the platter looking steady when it spins). Sounds like I need to use these adjusting pots. I've never done so before though. Do I need tiny screwdrivers that you would use for reading glasses? Is there a name for these? Any other tips on adjusting? Would be grateful for a reply.
@burnjack291 2 жыл бұрын
Can this be used with a 12v house led light number? To turn on / off (address number on the front house)
@leonline3424 2 жыл бұрын
Hi, sure,why not ? :)
@topa1798 2 жыл бұрын
mixing video please
@leonline3424 2 жыл бұрын
Maybe i will, thanks for checking the vid :)
@oc8382 3 жыл бұрын
I have nice rox600 slising gate. Can you please check on it manual where i have to connect Com and NO contacts there?
@leonline3424 3 жыл бұрын
9 Com, 12 NO
@oc8382 3 жыл бұрын
@@leonline3424 your are star! Thx a lot. And to power switch up from same Nice, What i could use ?
@leonline3424 2 жыл бұрын
@@oc8382 what do you intend for "power switch up from same Nice"? sorry but i'm not sure if i understand what you want to achieve :)
@oc8382 2 жыл бұрын
@@leonline3424 to take power for the switch, can i power it from gate motor nice rox600? I mean 9 cpm, 12 NO for a switch to communicate with gate, but which port from nice rox600 to use to get power for the wifi module?
@leonline3424 3 жыл бұрын
if you mean on the clean NO/NC no problem, that's why it's called "clean", you pass any voltage up to 220v.
@siwoprabowo589 3 жыл бұрын
what will happen if my input gives 12v ac voltage?
@danialothman 3 жыл бұрын
thanks for this! now i get how this works, will definitely make a prototype circuit
@leonline3424 3 жыл бұрын
Cool, it's nice to know i was helpful in anyway :)
@matthewanderson6254 3 жыл бұрын
Great video do you know how to do this with the new sonoff zigbee bridge. By that I mean what strobe siren is compatible and also do you think there's a way to get those r&f remote key chains to work with the Bridge as well
@leonline3424 3 жыл бұрын
Hi, i've yet to check the zigbee out, reason is that i'm fine with what i have. About the strobe siren you can go for a diy solution, check out my sonoff alarm diy vids :)
@mahendrakushwah1496 3 жыл бұрын
E825 microphone kesas he
@leonline3424 3 жыл бұрын
Sorry, but what do you mean by "kesas he" ?
@danieldetullio4808 3 жыл бұрын
hi, where can i get the drivers for windows 10? Thank you
@leonline3424 3 жыл бұрын
No drivers for win10, but if your lucky the win7 drivers might work, Google for the EWS88MT WIN 7 drivers, it's the same as the Phase 88 drivers. If you can't find them let me know.