?? Video shows that he is being treated??

#3 is my husband! Jose Ramirez! Thanks for posting this video!

Hello, has anyone told you what the electrical component does? and if actuates when power is hooked up

Thanks for the video. But Jesus Christ the camera work. I barely made it through it. Good thing you didn't shorted out fiddling with that test light and blow the fuse before we even got to see it😂

What a goose. Like we wanna watch ya fix your bike ya spastic

Is that a kick start does it work

40a is good. Still no accessory

If the little twin cylinder was hitting on both cylinders I think it would work better!

$35. Dollar tool save all that headache.

Poor engine 😢😂

This motor engine very complicsted !!!! The first is wather pression !!!!???

Do you know where I can get a replacement part for the airbag strut? There saying maybe me would cost 1200 for one I have 02 Escalade awd 6.0 the airbag strut all shot

4 stroke btw folks.

I got 2009 Arctic cat 366, do you know if the cdi box for artic 600 or 650 will fit it. Thank you

I would like to have your chart

Russell

Thank you. It worked like a bom. Absolutely wonderful. Thank you unbelievably much.

Originally thought it was my trailer wiring. They were getting worn and brittle. Had a neighbor plug his truck into my trailer and everything worked. So I knew it was my truck was the problem. Came upon your KZbin video and that was it. 15 amp fuse. If it keeps blowing maybe my trailer wiring is a problem LOL. But you got me going in the right direction. Thank you

Would be much better if you had sanded the upper yellowish layer first (especially the 1st one)... takes a couple of minutes. Also you should mask the surroundings of the headlight....

Good job on your video.

Yep, thanks again 12 yrs later lol. same fuse slot on a 17 sierra

Video is 12 years old, try finding parts for it today.

if you were to remove the 3 mud flap bolts on the bottom then it would easier to get at it.

Thank you answer my question i could find the fuse

2007 Chevy Tahoe, Blown fuse. Thanks for the post.

Hey mate do you have any videos of you taking off the clutch side i need to replace the gear selector shaft but i dont know how so im looking for some directions before i just have a go

You know what would have been nice if you would have said what colors each wire were so people can use the video such as me to put wires back

I don't know if I have a problem with my KFX 700, because I have a dilemma with the carburetor or whether the revs are too high when it is in gear and moving slowly forward. Should I adjust the idle throttle lower? What do you think?

They went foot shift

Pleasee help, i did all of this yesterday and everything worked perfectly and great videos, but when i put the primary clutch on it rubs against the little rubber peace behind it

Thank you for the help! In my case, every fuse tested as they should. However, the 15 amp fuse was physically the wrong size. Once we replaced it, the running lights worked! 😊

Great of you to post the video, it would be even better if the price was stated.

Please help me

I need a 2006 350Es rancher display

Thank you much!

Amigo no podés ser tan manco tenés que sacar el tensor de la cadena de distribución antes de sacar el piñón de la leva

I can’t figure out how to put this cover back on and which way to put the gears

This stuff works great. What a difference. Good stuff

Ur carrier bearing might be bad, if so hope u got money for a new axle

Mine is 99 love it I'm the second owner, my grandpa bought it from dealership as first owner. Mine is red not blue.

Its called polaris sport 400L. No scrambler, scrambler is 4x4, sport isnt

My bike can change gears, but it just slips so it rolls when trying to engage. Could it be sticky plates? It has standing still for almost a year...

Awesome video! this will help me much

Thank you, awesome tip. It worked great!!!

It's a blending solvent, probably should have taped and mask the area around the headlights off. It softens clear coats and makes it easier to blend old clear to new " repainted". Great video I had no idea it would work on headlights. So how long did it last on them?

1998 Polaris sport 400L..!! I have owned one since 1998. Have opened 2 different ones!!

@bigjermsgarage I have the same petcock and kit. Question: the top fuel line tap (right angle) was loose but not leaking. It appears to have a shallow concave ring in the part that goes down in the valve. O-ring maybe? If not, maybe a little JB weld or the like? Thanks

Arent you supposed tk make sure the “x” on both clutches line up before u put the belt on and how the f can someone make them line up when u put it on?

What year scrambler is this? Everyone says on a 98-2002 scrambler u can get belt on and off with one finger! I have a 99 500 w/o EBS and it was a bitch to get off. And a major bitch to get the new one on! Why do some ppls videos show them literally slip it right over primary and over secondary just as easy but this video dude has to walk it around by turning secondary to force it around and onto it? Also ppls videos show them separate secondary shieves by hand like nothin- mine cant be separated by hand!

Thanks for the video! Just found my problem was the cooked stator wires coming out of the engine cover!