10 жыл бұрын
10 жыл бұрын
11 жыл бұрын
11 жыл бұрын
11 жыл бұрын
12 жыл бұрын
12 жыл бұрын
12 жыл бұрын
12 жыл бұрын
12 жыл бұрын
12 жыл бұрын
14 жыл бұрын
Пікірлер
@ricksaunders3889 2 жыл бұрын
I have to ask, why would you want a freewheel on your crank ?
@Allthatglittersaintgold 2 жыл бұрын
Yo, thanks for this. 👌🏾 Never going to bleed a magura with a syringe ever again.
@bireckable 3 жыл бұрын
where you buy the crank arm?
@kocerfrank5887 4 жыл бұрын
Xorte ciwan use the water so is it healthy? You Must use oil machine?
@BorchOka 4 жыл бұрын
ах ты хитрая жопа! 😮😮😮👍
@imihajlow 4 жыл бұрын
Water? You mean like in the toilet?
@itsragz2847 5 жыл бұрын
Can you do a video on how to change from oil to water?
@SaFteiNZz 5 жыл бұрын
im guessing.. how to remove it?
@nikolapaspalj4954 4 жыл бұрын
there is a tool for it you hold it in place and turn the crank counter clockwise...
@andreabmxilrottamaiobizzar4430 6 жыл бұрын
mit dot 4 o mineral oil magura wbrake 1995??
@drbaglyosdaniel 5 жыл бұрын
"Aseol Terra 16-780 or Shell Naturelle HF-E 15 or sewing machine oil" - from the 1995 factory manual. From the factory comes with Aseol Terra 16-780.
@ciclofficinarimini5453 3 жыл бұрын
@@drbaglyosdaniel aseol terra are similar Blue Blood magura?
@skoopy1271 7 жыл бұрын
I seen this to day
@RickallsBushcraft01 8 жыл бұрын
thanks, iv subbed
@valisvadi 8 жыл бұрын
hey man, thanks for the video, always helpful. Do you not remove the master cyclinder when doing this?
@NitrousUK 8 жыл бұрын
Water??? What if it freezes!?
@TechGamer-yh6mh 5 жыл бұрын
Mix it with anti freeze
@Haroythere 9 жыл бұрын
Thanks for your tutorials, really helpful. I know it's straight forward but could you please do one with tips on rear tire removal and installing/adjusting snail cams/chain tensioners? Keep up the good work!
@BETTERTECH824 9 жыл бұрын
this is a F-ing joke right! water will destroy your brakes !!!!!!!! DO NOT USE WATER!
@VictorGarcia-gy8yv 7 жыл бұрын
MIKE JIMENEZ haha you dont now nothing about trials, and there are specify brakes for water (not in this case)
@olirendell7674 4 жыл бұрын
Very Late to this party. Trails riders used to use water because it didn't freeze up as quickly as mineral oil or something like that. I'm not 100% because I ride Bmx and is just here looking for hydraulic rim breaks reviews and stumbled across this.
@dannymagic333 2 жыл бұрын
It's to do with responsiveness for the brakes not the freezing point (oil won't freeze water does 👍) Water is less viscous so the brakes are applied faster that's all 👍 and it's cheaper 😂😂
@davelewis99 10 жыл бұрын
The first step in your case. Is to remove the dog shite from your front tyre....
@travisgrimm 10 жыл бұрын
Craps. I just dropped my bike at the shop to get refilled and bled.
@epiphoneerik 11 жыл бұрын
Do you know WHY oil is used in brakes? Heat transfers from the pads >> pistons >> brake fluid....if your brake fluid is water and you're flying down a hill, the water boils and you're left with no brakes. You're not that bright are you?
@liamnorwood 11 жыл бұрын
Hi Eric, Water bleeding of a magura is only used on trials bikes, because it's a relatively static sport and riders don't drag their brakes, the rim brakes do not get "hot"....feel free to watch some of my recent videos and i'm sure you'll understand. Thanks, Liam.
@epiphoneerik 11 жыл бұрын
Ahhh...didn't see that these were rim brakes till the end. I know discs would be a different story.
@UberMicroRepairs 8 жыл бұрын
Your a moron! Anyways. Remember water freezes and expands so if you leave your bike out in sub zero temps you'll have split hoses and cracked callipers. Use some sort of alcohol water mix.
@stephanjager8917 8 жыл бұрын
brakes convert kinetic energie into heat.... but if you think, that rimbrakes arnt getting hot... good luck on the way down...
@lukebyfield2725 7 жыл бұрын
in trials there is little to no heat build up as the sport is virtually stationary and the job of the brake is to stop the wheel entirely not to modulate, trials riders will rarely ride the bikes any sort of distance and will tend to foot break as we dont want to ruin our rim grind or shred the pads
@galansp 11 жыл бұрын
Bleeding the brakes with water will destroy them !!! After a few days or weeks the levers will not function properly.
@damonwatson4386 9 жыл бұрын
No it wont
@asher749 11 жыл бұрын
Will this work with hs11
@gsig123 11 жыл бұрын
Nice vid, very helpful.
@alexlawer11 11 жыл бұрын
huge!
@carpenjojo 11 жыл бұрын
Great riding!
@carpenjojo 11 жыл бұрын
Great riding! Love the editing on the video to match it to the song!
@coreydesborough2370 11 жыл бұрын
massive help thanks mate
@LiamFennerTrials 11 жыл бұрын
off topic I know, but what brake lever are you using on your Maguras, as I need to purchase a new one
@jackbrazier5133 11 жыл бұрын
what bikes ?
@DrStixy 12 жыл бұрын
Your vids are great but the volume is far too low :(
@liamnorwood 12 жыл бұрын
On an ECHO rim brake, yes. You should be able to (although you'd have to have your bike on it's side to make sure the bleed holes are upright).
@MontysIncProductions 12 жыл бұрын
Can you use this way with echo brakes?
@marcuschapman7318 12 жыл бұрын
How old are u ?
@PFC1982UK 12 жыл бұрын
This Is What I Do
@PFC1982UK 12 жыл бұрын
Best Brakes Around
@liamnorwood 12 жыл бұрын
Hi, bleeding the brake with water improves the responsiveness of the brake and makes the lever feel less sluggish. It's also cheaper than magura royal blood and far less messy. You do however void the warranty by doing so and it's not recommended. It is better to use a 50:50 mix of anti-freeze and water if you live somewhere cold to prevent the brake from freezing. This only works in hydraulic rim brakes, not disc brakes.
@TheMasterOfStupidity 12 жыл бұрын
why do you bleed your brakes with water???
@liamnorwood 12 жыл бұрын
I'm using a 2004 HS33 Magura in this video. This method will work just as well for 2005 levers.
@klemmmmens 12 жыл бұрын
what type magura is the brake
@VictorGarcia-gy8yv 7 жыл бұрын
klemmmmens hs33
@ecols 12 жыл бұрын
Dude, You should get a ratchet spanner..
@liamnorwood 12 жыл бұрын
It should work, check that all the barbs and hose fittings are tight and make sure you unscrew the TPA before bleeding. unscrew and screw in the bleed Bolt and Screw underwater. then you just need to get the technique right. take your time and practise! :)
@ZakharArbuzov 12 жыл бұрын
doesnt work. i dunno what i do wrong. i know dat i do somethin wrong but i dunno what exactly)
@briandorant8889 12 жыл бұрын
by other bike i mean the onza comp
@briandorant8889 12 жыл бұрын
where's the other bike and would you consider selling it for 300 or less. in need of a second hand bike please reply back to me
@liamchamberlain8056 12 жыл бұрын
Quality stuff
@321davida 12 жыл бұрын
Awesome video! :P nice riding!