I was trying this on my son’s 2008 focus and push the button and nothing happens except check engine light blinks , car ran normal b4
@Pablo-kd4mtАй бұрын
Anyone have a link to the part
@rogerjoseph25322 ай бұрын
Is that a 351 Cleveland
@diytrent75542 ай бұрын
Nope efi 351w
@matthewhock67353 ай бұрын
Very helpful for replacing my starter. My truck is a 2005 Sport Trac, so it was easier for me to crawl under the front of the truck versus the wheel well. Thanks again.
@brianspiller90753 ай бұрын
Why splice. Just back feed into the backside of the wiring.
@ecgodsmack863 ай бұрын
Any before and after pics, mine sags bad
@diytrent75543 ай бұрын
I do but idk how to add them in a comment
@ecgodsmack863 ай бұрын
@@diytrent7554 did it make a big difference
@diytrent75543 ай бұрын
@ecgodsmack86 yes about 2in and i tow my 5800lb travel trailer and sags way less
@waltersweet45953 ай бұрын
I took my tire down. I could sit under truck.
@waltersweet45953 ай бұрын
Did my 06 Duramax today. The bolts were a nightmare. Last 5 took 3 hours. Nothing to grab on to. Corroded heads. Put new cover on and new bolts. 6 hours. Looks good and no leaks.
@randyharris-sj5jb4 ай бұрын
Got a f725 and 265. ❤ them
@Gas_n_Gears6 ай бұрын
Watch out using brake clean with chlorine in it. If it burns it makes poison gas, strong and deadly. Still using your JD? I'm looking around to find out how to raise the seat, mine seems to be stuck. Have to remove the deck because the gearbox is locked up, need one of those too.
@diytrent75546 ай бұрын
Still use it all the time
@ghosty24-76 ай бұрын
I feel you man especially about the kids and the tools except for my chickens being out it's just pissing rain freezing rain on me
@todd18087 ай бұрын
America!!
@jrock-xs9vp7 ай бұрын
Thanks for your video
@chrisedwards48787 ай бұрын
Where does this O2 sensor plug in at because 03 Malibu given to me with no O2 sensor or catalytic converter and I got to find out where it plus onto
@FranciscoMateos-o2v7 ай бұрын
Great content, thanks for posting.
@mitchellcrager99338 ай бұрын
PB Blaster or WD40 them rusted bolts 10 mins before you start, and it should be a tremendous help!!!
@zerkfiter8 ай бұрын
People love to bash Ford.Id say the original starter lasting 175K is alright.
@diytrent75548 ай бұрын
O i know i have a 03 explorer with 200k with the original timing chains lol idk maybe im just lucky... But in the same breath the suburban has over 350k original engine and knock on wood the original 4l60e trans
@zerkfiter8 ай бұрын
@diytrent7554 people don't maintain and beat the crap out of them then complain when they break.
@matthewhock67353 ай бұрын
Yup, I just replaced mine in a 2005 Sport Trac that has 311k miles on it!
@tmmyjay8 ай бұрын
Is there a rear seal and pump gasket that need to be replaced too?
@diytrent75548 ай бұрын
That i do not know.. i think that seal is it but im not a transmission guy.. it fixed my leak
@patmad16599 ай бұрын
I did a more ghetto fix on an old VW golf, just had 2 wires hanging from my steering column that I pressed together to start it. I have an 08 focus with a failing ignition switch right now, but instead of a push button hanging from the dash I got a new ignition switch from rockauto for $24 shipped. Might have been a few bucks more than yours, but I can't complain too much about that.
@CR500R9 ай бұрын
You're 💯% right. The parts store clowns are absolutely the worst. Every negative stereotype there is... sure seems to be true. People don't try or have pride anymore.
@dantheman69319 ай бұрын
Nice! You could pull the bearing and seal out at the same time using the bearing puller.
@diytrent75549 ай бұрын
Well where was this comment when i was doing this lol now i know
@johncummings75699 ай бұрын
This is amazing man!!!!! Taking mine apart right now and had not seen a video like this which was incredibly helpful! I felt all alone but now I am ready to get back at it tomorrow!! You the best!!
@diytrent75549 ай бұрын
Your welcome
@ultimatewildcatfan10 ай бұрын
You're so gifted.
@intheworkseg610 ай бұрын
I had a torque converter go bad and it destroyed that seal but also a metal ring/sleeve came out too. Any idea what it would be? Its on the torque converter shaft that goes into the trans
@diytrent755410 ай бұрын
No idea but anything past the seal is the pump i hope it didn't do any damage.. but if its out and that happened to me id probably just change the pump also
@waldameerrocks025810 ай бұрын
Where is the h02 sensor located on this model car.
@diytrent75547 ай бұрын
The one I changed was the front the plug is located driver side around the rack i belive but if yours has no sensor or cat more then likely the wires were cut and are floating around there should be a blue white and black or maybe gray sorry i wasnt more help
@alanmoore7810 ай бұрын
4:25 This is the moment I hoped for and needed to see. It CAN come out the wheel well. Still gonna have to crawl around in the gravel on a cardboard box (aka broke peoples creeper) but at least I don't have to drop it on my face when it comes free.
@iamthesheepdog544711 ай бұрын
Definitely helped here.
@alejandromolina83311 ай бұрын
ou have to control your lenguage when you make videos or not maket at all . and you right the video is sucks
@21COOL-BIG-DADDY6811 ай бұрын
if it ain't a mack ! You might as well take it back 💪
@bravowhiskey88 Жыл бұрын
I would have put thoes races in the freezer for a bit
@toddbunnett640 Жыл бұрын
I don’t know if it’s coincidence or trailer companies trying to screw consumers but I have always done my bearing’s similar to you but the last new trailers I purchased the inside of the race sat flush with the inside of the hub making it impossible to pound out.
@AntonioPerez-qd3hi Жыл бұрын
Pongan lo en español
@trevoralbright128 Жыл бұрын
Can’t get those damn top bolts..
@diytrent7554 Жыл бұрын
I used a inverted torque i for get the size like a e30 on the socket i used a 3/8 swivel and all of my 3/8s extensions about 3 feet worth. Then i used i 3/8 to 1/2 and used my big 1/2in ratchet
@anthonydagosto7672 Жыл бұрын
Just use the spring compressor and don't remove any of that stuff...
@ecgodsmack863 ай бұрын
Link?
@J_S209 Жыл бұрын
Great instruction … thanks for doing this, you’d be an honest mechanic.
@diytrent7554 Жыл бұрын
I was just got sick of working for crooked shops.
@mindofq Жыл бұрын
How do you get the wire into the blue small things?
@Ffihxubv3 ай бұрын
You ever figure it out ?
@mindofq2 ай бұрын
@@Ffihxubvnah honestly didn’t know, what was wrong with that car. Ended up junking it, put mad money into it anyway.
@Schnippen_Schnappen1 Жыл бұрын
Did this stop your leak? I have the same issue but the transmission shop said you’re also supposed to replace the transmission pump bushing or it will leak again soon or right away
@diytrent7554 Жыл бұрын
It stopped mine hasn't leaded since
@RobHaag71 Жыл бұрын
A whole front pump is only about $300, like $220 for the pump but Jeep needs Jeep sealing ring kit and probably you’ll need a couple other items plus fluid. It’s the same tranny as Toyota A340, same pump. Jeep just uses a different valve body and has a different bell housing as far as i know so far. If the pump bushing isn’t bad then it’s not bad and that Input shaft seal should seal it up. I bet the pump bushing is easy to do though, if you don’t find a video about it for jeep look for Toyota A340.. you’re sure to find instructions.
@Schnippen_Schnappen1 Жыл бұрын
@@RobHaag71 ended up doing it myself. Ordered the bushing but it never arrived. Replaced the front seal,overdrive O-ring and rear main. Hardest part is moving that dang transmission/transfer case around it’s HEAVY! No more leaks so far so good
@1028entllc Жыл бұрын
👍🏽
@blass5506 Жыл бұрын
What about if you do not have the key ? How you would start the car ?
@diytrent7554 Жыл бұрын
I know with older chevys you could get the resistance from the key and solder in a resistor.. im sure its still the same
@JOHNGAL108 Жыл бұрын
Where you order coil spring
@diytrent7554 Жыл бұрын
Got them off amazon make sure u order the z71 they are better
@Patriotdesigns Жыл бұрын
Hey, I just had a quick question if you would, please answer it because I don’t know nothing about motors or none of that I do woodworking and it is beyond me when it comes to mowers and stuff. Hi see that there’s some type of green liquid in that plastic area you have right there in that little plastic on the side. What goes in there cause mines bone dry I bought mine at the auction and it’s bone dry I just wanted to make sure I was putting the right fluid in it is that coolant or is that transmission fluid?
@diytrent7554 Жыл бұрын
That is a coolant over flow. If its leaking you should be able to see where. Trust me if you do wood working this is easy.. i cant cut a 2x4 straight to save my life.
@Gas_n_Gears6 ай бұрын
Watch out using brake clean, if it has chlorine in it and you burn it, it makes poison gas. It's strong and deadly in small amounts. It is mustard gas. Still using your JD? I'm looking around trying to find out how to raise the seat, mine seems to be stuck. Need to remove the deck because the gearbox is locked up.
@ultimatewildcatfan Жыл бұрын
You DA MAN!
@mopacfan Жыл бұрын
Made me motion sick watching this
@diytrent7554 Жыл бұрын
Lol well your more then welcome to make a better video and post it.. send me the link and ill drop a like to it
@albertomendez9878 Жыл бұрын
mine sags over bumps replaced the shocks and does the same i already have the new trailing arms to replace them do you recomend changing the springs also
@diytrent7554 Жыл бұрын
Yes the springs fixed mine i used the z28 springs
@elbassonjr2 ай бұрын
My ride felt like a row boat . Replaced all four shocks , slight improvement. New rear coils , more improvement . Next new rear sway bar links 🤞
@marvindoblado136 Жыл бұрын
Finally a solution for this struggle, i've tried with the tape method but this is better, thank you
@johncane4127 Жыл бұрын
Great video and way to go with having your kid there with helping you out. He not inside playing video games and will know how to work in his own stuff one day.
@diytrent7554 Жыл бұрын
Thanks you..
@lingerseason Жыл бұрын
Thanks for making the vid, just found a ton of play in my wheel in the parking lot of auto zone and need to do this, you make it look simple!
@diytrent7554 Жыл бұрын
No problem happy i could help
@maigematthews5620 Жыл бұрын
How can your viewers gift you a tripod and what type of tripod do you need?