Thanks, I had a sleep study last night and now I can lower it myself. I lost 115 pounds so my pressure requirement went down

One of the best printers to print tpu is a bamboo lab X one carbon, external spool

That sounds like a not a Bambu lab P1S with AMS that prints PETG on a PEI kinda problem😎😎😎😎😎

Ezboard, where i first met robin plan. Oh happy joy joy. 😊

Some people online suggest that the freezer temperature may be set too low, causing the ice to freeze prematurely and clump up. Before doing anything just set the freezer to nothing colder than -5° and see if that fixes the problem give it a few hours to adjust to the new temperature. At the same time make sure you clean out the tray from all debris that may be causing clumping. If this doesn’t fix the problem, then you can do more advanced troubleshooting like checking the waterl ine and sensor, etc..

up it to 40x40 mesh at a speed of 700+ thats what I use with Cartographer its awesome. The Eddy tech is great to see being utilized by the companies for this.

I know this is a older video but very helpful . Mask are newer and user friendly. Try a hybrid like evora or F30i both awesome mask

What if you're gaming for 12 hours? Well, I do more than just game when I'm not working. I just ordered a Serta SmartLayers Landry Executive Chair in blue today. It has a weight capacity of 275 lbs and is designed for 6-8 hours of use. I weigh 200 lbs, and while I'm trying to lose more weight, it's not easy.

bro didn't read the manual and has the most unnecessary set up of all time and complains it doesn't work

Bro I thought my headsetbroke your sounds on the intro is onesided

review an Orbiter v2.5 please

My printer came with this inside the print head, yours is WAY faster than mine thou, i dont think mine uses the nozzle as the probe thou, and seems to level the bed perfect every time. Mine also after it hones the axis of x and y, it moves to a little silicone pad and whipes the nozzle off, it then retracts the filament a bunch to make sure none will come out before it begins the scanning process.

Good grief, regardless either one, are iron clad workhorse machines. Should’ve edited out all of the fine print BS

I am 53 seconds in and we didn't mention the ball screws?

which relays do what?

Pretty sick!

Subbed

Awesome video thank you!

Andrew, why not slap a Cpap kit on there and call it a day?

the issue that brought me here is this issue caused by filament pull resistance coming and going as the head moves side to side

Hi ! Mr.Big Daddy here ! How are you today, I am working on my 360 ! What model Laptop you have ! I know it is a HP !!!! What . I f you can let me know ! And are you running 7 our 8 .Thank you for your Time ! Mr.Big daddy .

Hello, this is the best video I have ever seen, short, fast and with all the explanation. Thank you very much.👍🙏👍

I know this is a super old video, but you’re the first person who has mentioned their guppy swimming vertically like mine is doing! Thank you! You gave me hope that I won’t have to euthanize my fancy guppy. 🤞🏼

look how small it is. STUPID

HAWK TUAH

Noctua, spin on that thang

Thanks for the video. This gave me all the information I needed for my project. You did an excellent job.

Wanna know how many liternis that

incredibly good explanation on backlash! I'm gonna use this video as a reference in the future if I ever need to explain backlash to someone

This is excatly the question im currently on^^. No joke, thanks

Thank you so much, Mine has the same problem

I have had similar problems with PowerStop man, not the Z23 but their cheaper lines. I bought them in 2019 and they fit a little snug but they fit and for the most part they felt fine. Brake pressure on the pedal was always very hard/firm but they stopped well and did not make much noise. Come 5 years later, bought new PowerStop's again, same part numbers, the brake pad ears were too big. Had to shave them down, and even after doing that, ended up with warped rotors and one brake pad wearing unevely. I switched over to Akebono....and what a world of difference. They fit perfectly, no shaving necessary. They are extremely quiet, and my brake pedal feels like a modern car's brake pedal where you have firmness but some cushioning, unlike when I had the PowerStops where I had to crush my foot on the brake pedal, this was probably due to the pads being too snug and not sliding easily. Other people seem to have no issue so, they either get incredibly luckily, the model of the car has stronger pistons where they don't feel these things, or PowerStop's quality control is hit/miss.

Check if it clean inside - seems to be a quality control problem.. some are still full of sand or similar, so air doesnt come through all holes.

Dude if you aren’t making money from your voice you’re crazy. Seriously, you’ve got a super smooth, announcer level voice

Bro... Bought this online a year ago pressure goes up to 8-10 from 4... I'm starting it from 8 tonite... Youre a life saver 🎉🎉

My main concern is shielding my printer from dust accumulation when printing or sitting idle, as I just work with PLA. I look at an enclosure as maintenance investment for my Bambu A1.

Is that an auto leveler?

YUCK!!!!!

Hold on a minute, we have printers, if there was a problem with the stock duct Im pretty certain someone in the community would have designed a replacement duct, however, I cant find one. I think this video shows the reason why. It is $20 in the US but they charge us in the UK £28 which is $35.55, its a rip off! foreign manufacturers call the UK Treasure Island because they can charge ridiculous amounts of money for products, the difference in prices for computers and parts can sometimes be double the US price.

I'm throwing down the gauntlet! See if you can beat my 10:55! kzbin.info/www/bejne/fn3SqIiric2kZ9Usi=xm8Wi3mOqdO2cPem

I know about the 2 nuts against eachother method but what about a nylon nut? or will the heat from the bed melt it? i might try this. tired of the springs

I like the color tbh. Just bought one for my Cooler Master HAF 912 after getting the Air Cooler.

What is the max flow rate? What temperature hotend and what type of plastic (fast)? Great result, mate!

Is this nozzle from previous videos mk and stock hotend? If it is - mate, it's an amazing result 👏. Good job

観られてよかったです！ありがとうございました。

we can go so much faster....but I need a high flow revo nozzle and a 60w core. Still tuning Orca, so quality is not quite what i want yet.

When split the fan output 4 way, there is only 25% for each direction instead of 50% for two ways. The stock fan may not be able provide sufficient airflow for either direction at 25%. I would say keep the stock duct and manually align overhang with the fan direction in slicer.

I got 2 assassin snails to take care of my bladder snail problem. Had em a year or so, now suddenly these little square eggs are appearing after I moved them from one tank to another. Apparently one of my "Little guys" was a "Little gal", so uh... Gonna see how this goes! I have a shrimp tank, and the adults I have don't really bother living, healthy shrimp.. Or any that I've seen, but if these eggs start hatching, gonna have to start selling or giving away assassin snails! XD