Dreams Don't Exist

Пікірлер

@johnefmargerona2934 6 күн бұрын

Does this works on the latest update?

@venardrock9622 10 күн бұрын

Any tabs po? 🙂

@eggylicious Ай бұрын

Was this JD's? Thats ANT i can hear it.

@jumpbullmorcdoc6604 2 ай бұрын

Can you make tap tempo using Chocolate midi controller and mg30?..New sub!

@stanislavdimitrov7783 3 ай бұрын

Y para que te han servido tolo sos ajustes que has hecho si al final lo dejaste en tradicional. El program A ... para eso no hace falta hacer nada de lo que has hrcho

@FachriHDVlog 3 ай бұрын

Can u use it as alternative switch for nux nmp 2?

@dreamsdontexist 3 ай бұрын

Yes, you can change scenes and fx block. Check out my other vid for fx block.

@RandzSasot 3 ай бұрын

Why mine is not working if powerbank only? Its not switching at all.. it needs to have a powersupply to make it work. Pls help. I already did you program in mvave

@dreamsdontexist 3 ай бұрын

try on different powe rbank.

@RickHardcore 3 ай бұрын

Sounds great man!🎸

@dreamsdontexist 3 ай бұрын

Thank You!

@mrevolver 4 ай бұрын

You keep saying “cc” but you have it on “pc”, correct?

@dreamsdontexist 4 ай бұрын

cc means control change on midi

@mrevolver 4 ай бұрын

I know, but you used program change (pc) did you not?

@mrevolver 4 ай бұрын

At 2:13 you have “type=cc” written on the left but the video has “pc” highlighted as “type” and it also says “pc” at top. Anyway, I followed this but used your screen instead of your words and that’s what ended up working - pc . Thanks for the video though, it helped

@MontyDeane Ай бұрын

@@mrevolver I would agree with @mrevolver. I see the same. its ok, as long as we know what it is.

@jethroviloria18 5 ай бұрын

Anong firmware version sayo?

@JunelBejec 5 ай бұрын

ano pwedde code po on of ng send return

@keithveloso2822 6 ай бұрын

How do you make the bank number text appear smaller in your Mux-MG30 Display?

@nerdhelvillacampa9765 6 ай бұрын

How to setup Nux Mg300 like this please

@serjduffroxas 6 ай бұрын

Hnd ko rin ma connect mg 30 ko i follwed your settings but not working.. pls help ty.

@dreamsdontexist 6 ай бұрын

Na update niyo napon ung ms1?

@joshvelasco9086 5 ай бұрын

How to update ms1 po sir?

@dreamsdontexist 5 ай бұрын

@@joshvelasco9086 connect niyo lng po ung ms1 cubesuit

@wakenwaken3618 7 ай бұрын

Can you have mvave all time on the power supply so no risk of battery running out? Can you set tap tempo on one of the switches and use other there as preset switch?

@dreamsdontexist 7 ай бұрын

Its better to charge it before playing. Tap tempo is possible if theres a midi# to configure.

@wakenwaken3618 7 ай бұрын

@@dreamsdontexist I was thinking to use power supply at all time connected to dongle and switch (they would be sitting on the pedalboard)

@joymelynjumaquio1720 7 ай бұрын

Nakuha ko na kung pano iset kung anong efx ang gusto mo, example efx then TS9, kaso pag switch on ko ng signal block ng efx, kung ano ang default na setting ng knobs ay dun cya bumabalik kahit isave mo ung gusto mong setting... eto naman ang problema ko ahahahaha

@bernbur-7134 8 ай бұрын

So no latency? Planning to use it with the Helix looper :)

@dreamsdontexist 8 ай бұрын

yes

@offwego6907 2 ай бұрын

Can I use it to change scenes?

@ApCommunityRock 8 ай бұрын

!! lets go my friend nice video !! keep rocking and stay safe my friend :D !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

@dreamsdontexist 8 ай бұрын

Thank you!

@ranzellatienza7427 8 ай бұрын

Gagana ba to kahit v2.5 lang ?

@christiansolisgtr3131 8 ай бұрын

hola, segui exactamente los pasos de configuración, pero no eh logrado hacerlo funcionar como en tu video, podrias ayudarme porfavor? me faltara configurar algo mas? muchas gracias de ante mano.

@dreamsdontexist 8 ай бұрын

try to update the ms1

@nenadbozic4816 8 ай бұрын

I just got m vave chocolate, I did everything as you showed in the video, but it doesn't change the patches. Any ideas? Thanks!

@dreamsdontexist 8 ай бұрын

Have you tried to update the ms1?

@nenadbozic4816 8 ай бұрын

@@dreamsdontexist oh I'm sorry, I solved the issue by changing parameter's of MS1 in Cubesuite, thanks!

@victorfideliss 8 ай бұрын

Amazing!!! Thank you man!

@robertofratini4458 9 ай бұрын

congrats for the video. My mvave dont change, can you tell me something? Or the midi command for the advanced mode. Thank you

@dreamsdontexist 8 ай бұрын

Have you tried to update the ms1?

@thegreatpochiicandoit2628 9 ай бұрын

Do you have a problem having ground loop or hiss sa amplifier and using usb recording? Kung nagkakaron din kayo hiss paano niyo po nasolution?

@dreamsdontexist 9 ай бұрын

Sa amplifier po wala, pero thru pc using usb meron and dko papo na search ung solution im using audio interface while recording (focusrite solo 3rd gen) kaya if mag record po using that interface no issue at all po.

@thegreatpochiicandoit2628 9 ай бұрын

@@dreamsdontexist buti hindi nagkaka hiss sa focusrite. Anong mga amplifier nagagamit mo?

@dreamsdontexist 9 ай бұрын

@@thegreatpochiicandoit2628 orange crush 20. bka din sa timpla mo ng effects, lalo na sa gain.

@grimtea1715 9 ай бұрын

Keep rocking!!! I love seeing this kind of stuff!

@MellowGhetto 9 ай бұрын

Fuck yeah!!!! You got me rockin out over here! Great job.

@dreamsdontexist 9 ай бұрын

Thank you sir

@hyprrbandito6069 9 ай бұрын

What delay settings did you use?

@jackupasturious 10 ай бұрын

meron yata kulang sa config settings ko, kakadating lang ng order ko na mvave, sunundan ko mismo ang instruction mo, pero nothings working, meron ba ko kulang, need help, thanks in advence

@joeysevilla8758 11 ай бұрын

Sir, san galing yung numbers sa data 2 na field?

@joeysevilla8758 11 ай бұрын

Sir, ask lang..iba iba po ba CC value kada unit o same lahat?..sinunod ko kasi lahat pero hndi parin mag sync yung chocolate sa MG30 ko..connected naman midi host at cables

@dreamsdontexist 11 ай бұрын

Same lang po ang pagkakaalam ko. Dko lng po alam if may changes pg ng upgrade ng version

@joeysevilla8758 11 ай бұрын

@@dreamsdontexist salamat sa reply sir, yung data 2 sir san po makikita?..yung 79 sa pedal midi cc value. 78 sa unit ko..79 is yung ID number hndi original midi CC number

@evangel5648 11 ай бұрын

nice video sir. very informative👌🤘🔥may delay po ba sa changes ng presets?

@dreamsdontexist 11 ай бұрын

Wala po sir. Basta press po activate npo agad ung preset.

@hahahakdogtv7620 11 ай бұрын

Sa wakas nakahanap din ng filipino for setting up..g system...nice one bossinh

@Paul_graphitic06 Жыл бұрын

Lods Saan mo nabili signmaster moh nangpangcto 630 salamat poh and godbless

@leandrooliveiracruz Жыл бұрын

Olá! Vc conectou controlador com cabo mídi ?

@dreamsdontexist Жыл бұрын

YES SIR I USE MVAVE MS1 MIDI WIRELESS

@fonztse Жыл бұрын

what is the setting of the midiportB? OTG Mode?

@normandst-aubin3571 Жыл бұрын

I have it turning blocks ON/OFF but it re-assigns the block's effect to the first one in the bank of blocks. For example, if my 1A rig has a Tube Screamer as my EFX block, when I press my A switch on the Cuvave, it will turn ON the Boost pedal instead of the Tube screamer... Any suggestions? Thanks!

@joymelynjumaquio1720 9 ай бұрын

Up dito... pag sinet ko sa tube screamer, pag switch on ko bumabalik sa boost pedal... pano po maseset sa specific efx pedal na gusto mo? Salamat po!

@genmar27 8 ай бұрын

Can you post an update for this issue. I'm having the same problem here. Everytime I turn it off/on using the Chocolate, it reverts to the first effect on the list instead of the one I assigned

@normandst-aubin3571 Жыл бұрын

Awesome! Will this work for all banks on the nux? Like will it always switch ON/OFF the block no matter which bank your in (1A 1B 1C, and so on until 32D)? Many thanks in advance my friend! Very good simple video to follow!

@dreamsdontexist Жыл бұрын

yes sir depends on your config

@normandst-aubin3571 Жыл бұрын

@@dreamsdontexisthey thanks for replying! I followed your instructions but I couldn’t get it to work. Are there pre-existing settings I need in the nux or the cuvave? Also, why did you say to use « 1 CC X 64 or 84 » in bank B? Is that a cuvave code or a nux code? Sorry for my many questions! Thanks again if you choose to answer them!

@user-tv8de9ed7j Жыл бұрын

Hi! Why Data1 is 79 for change banks? where does that number come from?

@dreamsdontexist 11 ай бұрын

Midi# in nux

@Coltron420 Жыл бұрын

do you ever have issues with device not working? I set it all up, had footswitch assigned to turn on and off EFX, Delay, and EQ. one minute it was all working well then i went back in to change a midi commmand and now i cant get it to communicate with the MG30.

@rafaelalves2473 Жыл бұрын

Nao consegui conectar quando conrctei na pedaleira nao mudou os efeitos

@torino380w8 Жыл бұрын

Todavía la tengo y no pienso venderla nunca, la uso para ir a los ensayos. Para mi la rompe.

@XTerkRS Жыл бұрын

Hey bro! Just two questions.. assigning them as you did, it turns out that the chocolate will turn on or off the effect corresponding to the specified module but not the module in general (let's say 2,2 will turn on RC booster but not TS or any EFX as is).. and, how you assign E and F when using the Advanced custom mode?

@Coltron420 Жыл бұрын

you cannot use E & F in adv custom. only the 4.

@rodelcabalbag5213 Жыл бұрын

Gud day boss. Mgpapaturo po sna ako kng panu ikonect ung wireless mvave sa nux mg30

@rodelcabalbag5213 Жыл бұрын

Gusto ko po sna magpatulong paps... Mg30 dn gamit ko. Ng purchase ako ng MIDI Chocolate. Kazo dko maiconnect. Android lng gamit ko na celphń. Naidownload ko nrn apps. Dko tlaga maiconnect kng panu ang process ng cp ang gamit. Sna matulungan mo ako paps...

@dreamsdontexist Жыл бұрын

may gamit kayon mvave wireless? need niyo sir ung mvave ms1 bluetooth

@jbstories0301 9 ай бұрын

Sir my FB ka pa help din sana Ako mag connect Kay mvave

@weeklykidstv716 Жыл бұрын

anu ba ibig sabihin ng 64 at 84 dun sa data?

@wherethejourneybeginschann9041 Жыл бұрын

lods ask ko lng bkit yung mismong blade yung tinututok mo sa registration mark? wla bng laser yung plotter mo? cuyi cto630 din yung gamit ko.. naka ilang calibration na ako,,ok nman yung mga adjustment na ginawa ko at ok din sa calibration sheet,,, pero pag nag countour cut na ako di pa rin sumasakto sa mga kinacut ko? paano mo ginagawa yung sayo?thank you..

@dreamsdontexist Жыл бұрын

nasira na kasi ung laser. mas okay ung manual kasi di accurate ung sa cto630 na contour cut

@wherethejourneybeginschann9041 Жыл бұрын

@@dreamsdontexist kayo siguro may sablay yung cut... salamat lods..

@dreamsdontexist Жыл бұрын

Try niyo po sa shopee sir..

@AmadorCamacho-xi4qq 8 ай бұрын

boss panu nyu na add cto 630 sa signmaster

@jugosart4145 6 ай бұрын

sir Anong type ng blade para sa cto 630 pcut ba@@dreamsdontexist

@Coltron420 Жыл бұрын

Does the chocolate have to be connected to the PC or phone to use or can you program the device for live gig use?

@dreamsdontexist Жыл бұрын

when you set your setting thru nuxmg30, it must be connected to mg30. one time set up only. you can change the setting thru phone via bluetooth

@rodelcabalbag5213 Жыл бұрын

Paanu boss? Bka po pd step by step ituro nyo po

@weeklykidstv716 Жыл бұрын

mas ok sir kung ON and OFF ng signal

@weeklykidstv716 Жыл бұрын

panu mo natutunan to sir?

@weeklykidstv716 Жыл бұрын

ito kailangan ko sir thank you

Ең жақсы KZbin

Пікірлер