Check your rear rails make sure they are straight Check your look make sure you installed the trigger bar and trigger bar spring in the gun correctly Check your safety plunger spring make sure you can push the safety plunger Check the firing pin and make sure it’s moving back and forth freely (should have spring tension) Check the front rail and make sure it doesn’t sit higher or lower than the rear rail Check and make sure the guide rod is all the way seated onto the barrel Check the frame where the guide rod sits and take any polymer off and any rough parts off where the guide rod sits Check and make sure the tabs are all the way sanded down (wet some 220 grit sandpaper) that’ll get you a pretty good smooth finish Check and make sure the rear rail also has no burrs smoothen that out as much as possible as well
@The_SIC_Administer2 ай бұрын
I’m having this problem with my full size frame. I know it’s the frame because my slide assembly operates fine on another frame. I’m looking at the locking block. I could use any ideas and suggestions
@VSLIFE0072 ай бұрын
Look at the back and see what is preventing it from pushing thru
@GaelxTsg3 ай бұрын
What did this happen??
@TheTyperboi3 ай бұрын
I just learned about this...thanks bro
@matt-ci5co3 ай бұрын
howd you fix it?
@FWhoMatters3 ай бұрын
I had the same probably so I bought a new slide and you need to make sure the slide is gen 3 and not gen 5
@runitupsilver89213 ай бұрын
Can you tell me where you got this at? I want a official one that says glock like yours not a off brand one
@gonzogonzo39203 ай бұрын
Wrong guide, rod and spring
@787Tactical4 ай бұрын
Rack the trigger by the fin and then put itnin
@Mrweightloser774 ай бұрын
That’s what u get for rocking no sights
@davionchaney4 ай бұрын
😢
@Mrweightloser774 ай бұрын
@@davionchaney Tryna act funny but an 18 year old has more brain capacity than you to put together a p80 with no issue🤣🤣
@Spyderwithnoleash6 ай бұрын
It’s cuz he you don’t have sights on it
@davionchaney4 ай бұрын
☹️
@Spyderwithnoleash4 ай бұрын
@@davionchaney sorry lol check your spring and or if something bent or catching on the slide or frame. Make sure it’s all smooth. It should be an easy fix if you find the issue
@derricklangford47256 ай бұрын
I didn't know tomatoes produced oils 🤔
@Blu3P0rc3l41n7 ай бұрын
this guy has to be trolling lol
@Reppintimefitness7 ай бұрын
💯
@YourPlugsPlug5027 ай бұрын
Backplate might be for a gen 4 instead of gen 5 that’s what happens if it ain’t right
@JhonKing-q1i8 ай бұрын
Spring dum
@LordsOfLag8 ай бұрын
Locking block spring sitting too high causing the slide channel to not be flush
@rajan42269 ай бұрын
Thx bro I’m trying to grow my hair so it can be the same as yours cause I want hair as long as yours so I hope these products grow my hair as fast as like yours so I hope those products help thx bro love you mr Scorpio I’m a Scorpio as well
@ProdbyKaee8 ай бұрын
W comment
@rajan42268 ай бұрын
@@ProdbyKaee ThX
@Kk1st4 ай бұрын
Did you use them and how is it?
@veryrareadrian9 ай бұрын
ur spring not pushed all the way down
@fox1actual9 ай бұрын
Really? *wEiRd WeiRD*
@miketomas26319 ай бұрын
Pull the trigger and if that don't work, then it is. Your retractor plate is hitting. You wanted to go on. Pull the 2 side pins down and slide it in at the same time while you're holding The side pins down
@ef2wb1810 ай бұрын
The recoil sting you have is for G19/G17 you need the sub-compact recoil spring
@ef2wb1810 ай бұрын
You have the wrong recoils spring on there
@robertneal336410 ай бұрын
He almost pointed that bitch at his own face but stopped himself he remembered what platform he on
@echo1er10 ай бұрын
Ensure the reoil spring is seated propper the channle is down to specs for free movement and the ejector is not bent to far right
@JAlo._.55611 ай бұрын
Slide that bih on hard it's gone work it was like that for 2 my builds
@TTGjdslime Жыл бұрын
It’s the button thing that ur trigger hits I just replace mine wit a another one and it went on
@BladeRunner25463c Жыл бұрын
Don't shoot your eye out
@Lakelife247 Жыл бұрын
That isn’t drilled deep enough, looks like the rails are sitting up high
@quentinjackson3778 Жыл бұрын
Ok I would like to start off by saying good video next maybe you can help me out my slide keeps hitting my rear rails is there any thing I can do about it
@royalexander5437 Жыл бұрын
There is also a 33 round magazine comparible with glock 19 and 17
@daquelhall9858 Жыл бұрын
Where you find that slide from
@daquelhall9858 Жыл бұрын
Pull yo trigger my boi 😭😭
@angelequihua28949 ай бұрын
😭😭😭
@monsta2311 Жыл бұрын
try pulling the take down lever down
@808_dummeh Жыл бұрын
get oem slides 💯 won’t disappoint
@hooleesheet6775 Жыл бұрын
Push Down The Switches On They Sides It’ll Slide In
@camrangary2199 Жыл бұрын
Push it harder than that
@marktolliver11339 ай бұрын
Could be the barrel seating block is too thick. You may need to sand it down.
@chuckmercer8950 Жыл бұрын
Trigger is in the fire position
@TBshoots Жыл бұрын
Where you get the frame from
@re6_vlogz Жыл бұрын
I got the same one 19g3 is the best❤❤❤
@lameckyt11598 ай бұрын
Your smoking crack 19 gen 5 is the best
@juddr2001 Жыл бұрын
I had that problem and I switched out the barrel and everything works great!
@The_SIC_Administer2 ай бұрын
From what barrel to what barrel?
@jameskim2007 Жыл бұрын
Press the plunger down, let the firing pin go down and stop fucking around with your gun. I have friends that fuck with their Glock till it becomes unreliable
@TheHulk31803 Жыл бұрын
That cut off was perfect 😂
@alenaeskridge4672 Жыл бұрын
Lol. Hahahahahaha
@briannacovington9552 Жыл бұрын
Lol
@johnnyolivero711 Жыл бұрын
Gen3 🔥
@Dodgingsimulator Жыл бұрын
Lol he goes free his next album "slaying like muh lawyers"