Are you still rocking with this car? Do you have a link to your headlight replacement? Thanks

That's not how you're supposed to use the fuse tap. You have to be careful one side of the fuse is positive and the other side is negative.

what if you are just using a one sub setup ? Is it essentially the same

Those cosmetic problems would stop me from buying it

Clean install straight to the point! ❤

I would hope you got a nice box with it. You paid 160.00 for a 20.00 I’ve been making a fortune off these things for 5 years now. And as far as you saying it’s safe… it’s actually not. There’s no fail safe. You’re plugging something between your accelerator pedal and ecu. If there’s a malfunction in the box, because there’s no fail safe your car can just ghost ride…. Yes it’s still a 4 cylinder lol. This doesn’t add power… it simply increases throttle response. You say you don’t want to change setting while moving because you want to see and feel the difference… if you want to see and feel it, then change the settings while you’re driving. Buying these in bulk I was getting them for 14.00 buying 100 at a time and selling them for 150 all day long. This exact unit will work on a ton of Chrysler products… if it’s got the same plug for the accelerator pedal it will work. You simply turned a snail into a turtle. Stop dicking around and throw a turbo on it. Maybe you’ll get a shout out?? Bro! Do you have any idea how many of these you probably sold for them? They should be giving them to you for free or paying you.

My battery is in the trunk, so idk😅

You can do the mileage through eeprom. Just open the cluster, connect to the 8 leg eeprom and find the mileage and correct it.

What year is that truck

Where did you plug the remote wire to?

Any idea if all this is the same with 19+ “gen 5s”?

Looks like Samus head i love it

Love my 200 driving it for 10 years now with 160700 miles on it

I just bought a 2013 200 for doordashing

This video shows alot of what not to do. At the boot do not cut it. What you actually do is cut the tape wrapped around the wires carefully. Remove the tape. You can do two things. Rewrap that tape then pull amp wiring through, or pull amp wiring then wrap amp wiring with wiring with new tape.

Where can I buy the paddles and the module?

Only watching this because it's the same stock wheel on the Pontiac G6 😂

where could i find a catback system that will fit before i straight pipe it?

After seeing how is of a job it is I’m sold !! Nice job

I have this all hooked up like this and it doesn’t work. Do we think it’s my amp

Just joined what is that big screen and where did you get it?

Great video man really helpful just ordered some I’m also doing the blinker to a switch back style keep up the good videos

Still feels cheap. It’s GMs fault using the Cobalt steering wheel. I need no to look into something completely different.

How to you get the infinity.i just got a set and when i turn my hazards on or hit my unlock button it doesn’t do the infinity illusion

Do you have to run it for both door speakers or can you do just 1

Como los conectaste al arnes para que funcionaran??

Do you have any issue with the car so far ?

They are bright to look at, but how do they light up the road?

Ever think about deleting the high flow cat from the header, putting a straight pipe in its place with a non fouler for the o2 sensor? I'm thinking about purchasing the headers for my dart and doing that and maybe putting a high flow cat or round single chamber muffler in place of the mid pipe (where the stock resonator use to be) to get more flow from the header but still reduce drone.

what about a canadian car ?

I done it just like this and as soon as the radio comes on amp cuts off and comes back on as soon as it cuts off

My light wouldn’t cut off and I would have the running light constantly going so I wired the green to a wire tap then my red to the power at the brake light, now my turn signals won’t work

Do you remember if the radio has RCA outs for an amp, and if it has Video out for rear monitors? How has the radio held up, and are you still happy with it?

How you tinted your back head lights

Does it have to be on one of the back speakers or can it be on the front door speaker?

This makes sense BUT if you have a 5 channel amp and send power from the amp back to all of the Front and rear door speakers. The stock rear speaker wiring from the head unit goes to the line output. The front door speaker wires FROM the Amp to the front door speakers you have to reroute them from the amp back to the front and cut your factory front door speaker wires and splice your new wires from your amp back into the stock front door speaker wires behind the stock radio..? The speaker wires for the rear speakers you would just run them straight to the speakers from the amp. Is this right? Seems like a major PITFA but doable..

Sounds awful for my ears. Thanks for sharing; changed my mind for my own s40.

Thanks man! Soooooo needed to modernize my 09!

They look great! You didnt need to tape off the tyres at all from the overspray?

My LED kit didn't come with a glove box replacement bulb either. If you use some heat shrink tubing on the tips of your needle nose pliers, those bulbs in the rear view mirror come out very easily.

Do you loose the pocket thats on top of the oem radio? I use it to mount display units when I tow

Good video, but fuck when I say these are a pain in the ass to install I mean it, I have a 2017 Honda civic hatch back, it took me two hours to install these lights, I don’t know if I was doing it wrong or something but I didn’t even install the turn signal part because I was so frustrated, the turn signals didn’t work when I connected them either so I just left the led in with no turn signal connected. If you’re going to install these make sure you have a couple hours on your hands.

It worked. Thanks. However, I can’t get the amber signal light to work.

This must be the worst video ever.. sadly I am more interested in seeing what it looks like from behind the steering wheel than you recording the actual light.

Do you have a video on how to install the relay for the led headlights?

Is it ok to just tuck the copper wire under the fuse and push the fuse back down?

It’s gonna have consistent power. Your amp is never gonna shut off

I tried it. It said ready to program fob 2 I had two new fobs it won’t program either one. I tried 10 times why won’t it program? I bought a little cheap aftermarkets on eBay.

got one with 145k miles for 2000$ a few days ago

I have the Chrysler 200 and I want to use two loc’s but can I? And I have no audio no matter what I do