I’m looking at one on market place do you recommend this exact brand and model?
@rushedscheduledfun39633 күн бұрын
It is ok. I bet there are better ones. Good luck
@jasonbeck757912 күн бұрын
Hmmmmm needed bigger than a 13/16, then says I found a socket that works and does not say what size it was. hahahahahahahahahaha
@rickey535325 күн бұрын
You helped me and my 1715, plenty. Thanks, my friend.
@rushedscheduledfun396321 күн бұрын
Glad to help
@eightsprites26 күн бұрын
Thanks! Im gonna buy one of those. And this really showed me how much/little work is required for a clutch job.
@rushedscheduledfun396321 күн бұрын
Glad I could help!
@ni504329 күн бұрын
Muy buen video muchas gracias por esta infomacion
@09rjaАй бұрын
Do you have a part/model # for that oil filter? All the Ford tractor dealers around me are out of business so I have no one to ask.
@rickwarde9821Ай бұрын
You suck! Doesn't tell you a thing
@johnbowman4844Ай бұрын
Talking about that price with a neighbor. Same situation. Kinda feel bad not buying from the small businesses, but when you can buy it, shipped to your door for half price, its hard to support the local business in this economy
@rushedscheduledfun3963Ай бұрын
I posted this in 2019. It is even worse now. Thanks for your thoughts on this
@timothycoleman8916Ай бұрын
That charger you have is garbage. Buy a good one. That one will kill your batteries in time.
@randallsamson80172 ай бұрын
great video-thanks! will save me some time on replacing the cable
@rushedscheduledfun3963Ай бұрын
Glad it helped
@LumberjackJerry-ez5jw2 ай бұрын
What bearing kit did you order ? for the machine , I'm in the same process, please and thanks
@rushedscheduledfun3963Ай бұрын
Not sure any more. Numbers should be stamped in bearings
@iamalexkoplas92832 ай бұрын
Hey so I have a 2016 Chevy Malibu and I do it on the front driver and passenger good and the back passenger is good but when I get to the back driver one it does not seem to honk does that mean the tire sensor is bad?when my tire pressure came on and it was blank on the tire pressure it was the front driver one but that one is finding the signal fine. Do you think the tire sensor bad ?
@rushedscheduledfun39632 ай бұрын
Could be. Batteries go out after a while
@DAnewestOne2 ай бұрын
What’s the spark plug size?
@rushedscheduledfun39632 ай бұрын
Its a diesel engine
@DJtheDad2 ай бұрын
Thanks! Wondered what was behind the secret door (cover) on the brakes and plan to tackle this on my 1210. But on my 1210, the linkage on both sides was already fully adjusted to its max to where the threaded rod interferes with the linkage if I were to go any tighter. However the drum and the pads have plenty of meat left of them. So I trimmed 1/2" off of the right-hand-threaded end to create some clearance. Also my brake covers had no gasket. So I used some RTV to seal them up. Had a lot of rust dust in the drums and shoe assemblies. And I had to lubricate the lever bushings.
@tommarkstrom44203 ай бұрын
Hello, I just got one of these PW6E. Got mine running and it needs brake work. I looked up the electric dump kit that’s offered by DR. It comes in 4 variants depending on the machine serial number. The actuator is universal but the wiring harnesses are different. The kit is $530 as of this writing. My question is what are the details on the actuator you installed? What medical equipment did it come from? Thanks.
@rushedscheduledfun39633 ай бұрын
Adjustable bed. Look up actuator on Amazon. I think mine is a 12" travel I think It has been a while since I added it. Good luck
@differentbydesign76033 ай бұрын
I just got a 1710 but mines only 2wd... loving it so far tho
@rushedscheduledfun39633 ай бұрын
It is a good-sized tractor for around the property!
@gailmike20014 ай бұрын
Nice ass crack lol
@gailmike20014 ай бұрын
Pre drill
@johnscofield93464 ай бұрын
single clutch
@BobWarnerBarn4 ай бұрын
Nice!....................................
@danthurman90765 ай бұрын
You need a draft diverter, barometric damper. Without it the heat from the coal gets sucked up the chimney.
@user-yc6pv1xy1s5 ай бұрын
It’s helping me a lot! I have a 1900. Left rear wheel is jammed. I wasn’t sure where to look for break and how it was set. Now I know how to check! Thank for your video!
@cesarcorona27065 ай бұрын
What kind of marker did you use
@rushedscheduledfun39635 ай бұрын
Probably a paint pen or a grease pencil.
@YasserA-ph4jz5 ай бұрын
Hi can you help me i have rotary laser don't work and gev error 1at screen
@rushedscheduledfun39635 ай бұрын
Sorry. I dont know how to fix the problem
@YasserA-ph4jz5 ай бұрын
@@rushedscheduledfun3963 thanks
@Miniloaders6 ай бұрын
Starting to like these grapples! Lightweight and compact.
@rushedscheduledfun39636 ай бұрын
This grapple was a lot lighter. My Dingo can only lift 450 lbs, so this was a huge help.
@crowridge16 ай бұрын
Where did you spray the starter fluid when you bled your injectors? Tractor was blocking the view.
@rushedscheduledfun39636 ай бұрын
In the air intake.
@dr.philphilsphil57956 ай бұрын
Thank you for posting an 11 minute video for a 30 second tutorial. Really appreciate it!
@rushedscheduledfun39635 ай бұрын
Thanks. You will never get that time back.
@sauersaxon8 ай бұрын
Go Browns!
@charliestevenson10298 ай бұрын
In fact you can do this without removing the wheels and mudguards, as I just did on a 1910. Got the shoes re-lined for £28 UK
@Guanacoboi9 ай бұрын
I forgot to mention i did see a couple other videos on here where they use a similar tool but its orange. Is that the same one or do i need that blue one you have?
@rushedscheduledfun39639 ай бұрын
I dont think it makes a difference which one you use. It will have you start with the front driver side tire sensor. Just like in the video. Good luck. Also, in manual
@Guanacoboi9 ай бұрын
@@rushedscheduledfun3963 I can’t get it to read the tire. I think its bc the tires are too wide
@Guanacoboi9 ай бұрын
I have a 2020 Silverado ltz that i bought lifted and with bigger tires. I keep getting the “check tire pressure monitoring system” my problem is I can’t get the tire pressure monitor. You know where it shows all 4 tires and tells you psi for each one. What do i meed to do? Thanks!
@willevans14719 ай бұрын
Judging by the new fan & hydraulic filter I imagine the water pump let go at some point.
@rushedscheduledfun39639 ай бұрын
I will have to take another look. I was just happy it started.
@user-tn1eo9wn4k9 ай бұрын
What size is the hex head you idiot????????
@samuelbelk38909 ай бұрын
Great video,,, I have a tuft tiller!! Just wondering where you got the seals from? I need the axle and the tines seals.
@rushedscheduledfun39639 ай бұрын
It have been a while. Probably ebay. I believe I had to take apart to find the numbers on the seals. Good luck
@buckyoufiden21879 ай бұрын
your instructional video is so genuine, which I appreciate. Thanks for all the tips, especially installing the handle. God Bless you for sharing your time and skills to help others.
@rushedscheduledfun39639 ай бұрын
Thanks for the positive feedback
@Majestic-Gaming9 ай бұрын
In your 1700 video that you took the Bradco 310 loader off I noticed it had an Akron tractor sticker on the front, are you around that area? I just thought it was kind of interesting because I have a ford 1710 with that same Bradco loader that was also sold at Akron tractor. I’ve video, I always enjoys seeing these types Of videos.
@rushedscheduledfun39639 ай бұрын
I am in that area. Seems like they put it on a lot of tractors. The guy I bought it from said he had it installed in the 90s
@Majestic-Gaming9 ай бұрын
@@rushedscheduledfun3963 thats cool, I talked to Akron tractor and they gave me all the dealer receipts from 1983 for my tractor. and the Bradco 310 was a dealer option to have that loader. I am also in that area. Nice video!
@Nature-bt5ip10 ай бұрын
so so so so so
@jamesstanley550310 ай бұрын
thanks for posting the video. do you remember how quarts of hydraulic fluid it took? thanks
@rushedscheduledfun396310 ай бұрын
Thanks for watching. Sorry dont remember the amount of hydraulic fluid. I bought a 5 gallon pail.
@C88west10 ай бұрын
770B loader i assume? Thats what i got on my 1910- curious what you used for stands when you took it off? Preparing to take mine off for the winter to do some line repairs. Thanks for the vidya!!
@rushedscheduledfun396310 ай бұрын
I took off the loader from the front with my skidsteer with forks. And i set it on a few plastic pallets to keep it off the ground. I marked all the hydraulic lines with a paint marker so I can put it back together with with no issues. It went way easier than I thought. I have a video of a 1700 that had a Woods brand loader. It was a struggle.
@C88west10 ай бұрын
@@rushedscheduledfun3963 thanks for the reply.... unfortunately I'm ill equipped and this is my only machine...planning to build a set of stands when the time comes but always open to ideas lol
@dwayne50110 ай бұрын
Good to see a Power King in this video!!! I love mine.
@rushedscheduledfun396310 ай бұрын
Great tractor!
@allison44710 ай бұрын
Doggy wants to go for a drive
@rushedscheduledfun396310 ай бұрын
She is always ready for a ride!
@olbasanolba617310 ай бұрын
Como enciende la caldera
@georgea640310 ай бұрын
I’m just going to order the whole tire/wheel/bearing assembly for $59 each. Thanks for the info
@rushedscheduledfun396310 ай бұрын
It's probably a good choice
@lindapatrick229610 ай бұрын
There's caps that you can buy to put over the v bearing buddies
@andreyolenyk625310 ай бұрын
At What auction did you purchase it ?
@rushedscheduledfun396310 ай бұрын
Yoder auction in ohio
@andreyolenyk625310 ай бұрын
@@rushedscheduledfun3963 is it a website?
@andreyolenyk625310 ай бұрын
And thank you very much for sharing the information
@jbcaplinger11 ай бұрын
Your video helped tremendously. I had just bought a 1510.... Previous owner neglected to tell me the brakes were none existent. Found that out when i tried loading it on the trailer. I'll definitely try the adjustments first.... But at least i know what I'm getting into, if i do have to go further. Yours was the ONLY video I've found that covers brakes.
@rushedscheduledfun396311 ай бұрын
Thanks for the information, glad it helped
@kenwimmer393611 ай бұрын
Very good Machine !! I have a 2012 model I did some modifications to mine ,,, I replaced the unloader , put a regulator/unloader on it ,(it gives you time to move hoses around and re-curculate water without over-heating the pump ) also put a ball valve on the pump to take P.S.I. pressure off the pump for re-starting , I also eliminated the soap induction, and just use a foam cannon ,(less restrictions) they are made in CANADA and as far as odering parts ,,, believe it or not I've ordered them and received them the next Day ( even during C-19 )
@rushedscheduledfun396311 ай бұрын
Good information
@kkoda12311 ай бұрын
Test
@gulraizkaka4156 Жыл бұрын
Good
@rushedscheduledfun3963 Жыл бұрын
Thanks
@muskegonhunterscamp Жыл бұрын
Total bonus barn find. Thanks for going through the bleeding steps. What's the ford model loader that comes w/a 1910? Feeling not so smart, thought the 19/20 series were all 4 cylinders & 15/17 were 3 cylinders... oops. Too bad the clutch is good... I wanted to see ya split her in half. Great channel Matt, wish ya posted more.
@rushedscheduledfun3963 Жыл бұрын
The rear main is leaking. So I still may need to split it if I can not fix it by dropping the oil pan. Trying to find the parts. Thanks for watching and commenting