Fascinating - I came here because I saw an antique hibachi and have learned a lot (not least that it’s for indoor heating and not cooking). Thank you for sharing
@islandblacksmithАй бұрын
excellent...the journey continues! ^_^
@13garage._Ай бұрын
thanks. i was actually wondering how it works :)
@islandblacksmithАй бұрын
quite an interesting system!
@yizhuolin39062 ай бұрын
wait... at 21:57 did you just plug a short pencil in a bamboo so you don't have to waste it when it's short? that's brilliant!
@islandblacksmith2 ай бұрын
just find one that fits tightly! ^__^
@LockNLoad7772 ай бұрын
Nice work!
@davidwelton36073 ай бұрын
Should I make a smaller saya nomi for a tanto or is the size more of a matter of ergonomics?
@islandblacksmith3 ай бұрын
smaller is nice for tanto...you can easily make do with one 3/8" or you could make a pair, one slightly smaller and one slightly larger than that...
@JustClaude133 ай бұрын
Thank you, that's just what I needed. I'm writing a renaissance fantasy where a blacksmith is soldering brass parts together for sword fittings, so I needed to know how to do it with a forge. Now I know the secret is to have a peacock supervising.
@islandblacksmith3 ай бұрын
haha, yes! the real secret is plenty of charcoal and no more air than necessary...this makes a carbon-rich atmosphere around the piece which prevents oxygen from corrupting the joint...
@velazquezarmouries4 ай бұрын
I going an unusually hard piece of rebar so I might try to make one aswell
@smacksteel7084 ай бұрын
Hi, very nice work… what material is the small piece you put in between the copper joint. And what material is the thin “U” shaped piece you placed on top of it
@fnafplayer64474 ай бұрын
I have a question, is the wood you used a traditional wood cause there is a Histu Nata I want to restore and want to use japanese wood but what would you recommend as I have found some japanese oak but the stuff is expensive?
@masonjeanes66044 ай бұрын
What is the traditional name for a japanese swordsmithing hammer?
@islandblacksmith4 ай бұрын
nothing too specific, tezuchi just means "hand hammer"... islandblacksmith.ca/2013/04/why-you-need-a-japanese-swordsmiths-hammer/
@davidwelton36074 ай бұрын
Awesome work. I'm going to attempt my first habaki tomorrow. We'll see how it goes...
@islandblacksmith4 ай бұрын
great! more detail here: islandblacksmith.ca/process/making-habaki/ machigane info: islandblacksmith.ca/2014/10/classical-tanto-construction-habaki-%E3%81%AE-machigane/
@joresvanwensen9225 ай бұрын
Gonna make mine this way from now on. My way was terribly hard compared to this. Thank you for showing this 😊
@islandblacksmith5 ай бұрын
great! more detail here: islandblacksmith.ca/process/making-habaki/ machigane info: islandblacksmith.ca/2014/10/classical-tanto-construction-habaki-%E3%81%AE-machigane/
@MrNicovdw5 ай бұрын
what wood do you use for this ?
@islandblacksmith5 ай бұрын
hounoki is japanese bigleaf magnolia...north american tulip magnolia is similar to it...
@MrNicovdw5 ай бұрын
thanks for the answer , that wood is a mip to find overhere in belgium @@islandblacksmith
@islandblacksmith5 ай бұрын
yes, i have to order from japan as well, but i have the option of the north american variety now as well...if you can get some of the real thing from somewhere like namikawa heibei and then find something similar locally in hardness, density, grain, low acidity, low sap, low moisture, and stability, it may work for what you are doing...
@userenvy5 ай бұрын
Is it pooping lil hot aluminum lava? Yikes. I love this old school feeling but i like knowing more about things that scare the crap out of me. Popping metal turns out to be on of them.. lol
@islandblacksmith5 ай бұрын
they are carefully poured from a ladle onto a cold steel plate, it cools them fast enough to keep them from flowing too flat...it is still quite hot but liquid aluminum is cooler than most molten metals...
@iNeverSimp5 ай бұрын
It's magic!
@Ellen44665 ай бұрын
很溫暖的感覺!真好~
@user-kl2zj7gz7k5 ай бұрын
уж больно мягкую сталь используешь для клинка...
@islandblacksmith5 ай бұрын
how do you know? ^__^
@user-kl2zj7gz7k5 ай бұрын
знаю . изучал .@@islandblacksmith
@islandblacksmith5 ай бұрын
studied what? the piece of steel in my forge? what is the carbon content? or what is the final hardness of the edge? ^__^
@user-kl2zj7gz7k5 ай бұрын
количество углерода в аналогичных деталях.@@islandblacksmith
@islandblacksmith5 ай бұрын
do you know what a harrow tooth is? this is not a bolt...the way to tell if something is high carbon is to heat it red and quench in water, then test if it snaps or bends...snap = >.5, bend = <.4, bend and then snap = ~.4
@cadinvest5 ай бұрын
wow that is now good for paperweight, that crack will ruin everything.....sadly some folks will follow your method...but that is just not ok for a 500$ knife to get shattered by a 35$ broken thurd.
@islandblacksmith5 ай бұрын
this is a centuries-old method used to repair not only broken stones, but to fill large gaps where harder mineral deposits must be dug out to prevent scratching...this stone has been polishing traditional swords for several years since the repair.
@feraltweed6 ай бұрын
Great video I enjoyed it a lot but could not understand what language you were speaking bsouded like Turkish
@islandblacksmith6 ай бұрын
yep! ^__^
@feraltweed6 ай бұрын
It’s beautiful but what is the reason for the double scabbard
@islandblacksmith6 ай бұрын
to quote the description and pinned comment: " A refined detail that is normally hidden from view, the ireko saya protects the blade from the hardwood." more info linked on the website...
@MarvinConman6 ай бұрын
I love this but I feel like Xibit when I see this - "Yo dawg I heard you like daggers so I made a scabbard for your scabbard so you can sheathe while you sheathe" XD
@islandblacksmith6 ай бұрын
yep!
@BubbleChumpkins10 ай бұрын
what brand of tabi are these? they look very comfortable!
@islandblacksmith10 ай бұрын
they are! ...just from the local hardware store in japan, i don't think this brand is online anywhere...
@alexzioek968010 ай бұрын
The spirit of this forge is so deep and profound. I really miss all the footage, or, rather, like to come back here. These are so inspirational.
@islandblacksmith10 ай бұрын
much appreciated! the spirit continues, though the footage is delayed ^__^ (and there are a couple of new items on the website/rumble islandblacksmith.ca )
@pc605410 ай бұрын
I’ve been searching for this all day. I kept getting search results on how to open a regular katana with a tsuba. I’ll have to try these out to see which works best. Thank you!
@islandblacksmith10 ай бұрын
great!
@jcevans1611 ай бұрын
Amazing work, wow
@fernandoban505011 ай бұрын
what sand is that?
@islandblacksmith11 ай бұрын
whatever you can find!
@MrPedroestevam Жыл бұрын
A doubt. What is the width and thickness of the blade at the spine?
@islandblacksmith Жыл бұрын
you can find very detailed specs, photos, and information about each build on the website: islandblacksmith.ca/featured-work/
@qifgt Жыл бұрын
Come back sir! We miss ur vids veryyu much😢
@benjaminbongolan9131 Жыл бұрын
Book matched too!(the saya!)
@islandblacksmith Жыл бұрын
yes, the whole mounting is made from one block so the grain connects the whole way on both sides...
@benjaminbongolan9131 Жыл бұрын
Hi. Have you ever watch any of the Satoichi movies? His cane sword is straight and looks like it’s on the slim side I’m 5’7” in height two feet 6 to 7 inches in nagasa? So how much for such a sword using fresh 1080 steel in Sirisaya? As to the hamon a shallow suguha ( that you do so well) polished to the first uchigumari stones . Thanks.
@islandblacksmith Жыл бұрын
tanto is my area of focus so i haven't done anything larger yet, also not something i can put on my list at this point...but yes, slim, a bit shorter, and fairly straight in a cane is what you are looking for...there are a few antique versions that come up for sale from time to time even...
@humanbeanchikin Жыл бұрын
how do you make your rice glue?
@islandblacksmith Жыл бұрын
islandblacksmith.ca/tag/sokui/
@humanbeanchikin Жыл бұрын
imagine being a eruopean smith in the 16somethings and having one of your clients bring you a knife with a scabbard for its scabbard
@joselrpfanai4521 Жыл бұрын
Is that pure water,did. U pre heated first
@islandblacksmith Жыл бұрын
pure water, depending on the steel and the weather preheating is safer...
@hugot2261 Жыл бұрын
can someone tell me what is that thing used for smootheing the wood at 24:35 ?
@islandblacksmith Жыл бұрын
tokusa, horsetail, aka scouring rush...check the description for links to the articles with more info...
@hugot2261 Жыл бұрын
@@islandblacksmith Thank you very much. :)
@islandblacksmith Жыл бұрын
...and you can also use the fine plane shavings from magnolia (or probably most woods) to burnish the surface...
@mariaconcepcionrodriguezhe2850 Жыл бұрын
With such a loose fit wont it start rattling as soon as you use it?
@islandblacksmith Жыл бұрын
what is loose? the goal is to have them slide in freely until the last 1-2mm, then the habaki engages tightly, and the scabbard should be carved very closely to the blade shape to prevent rattling...
@freedom2012inworld Жыл бұрын
Thank you for that visual explanation
@jfrault7960 Жыл бұрын
A little narration would of went a long way. Never getting this time back...😮😢
@islandblacksmith Жыл бұрын
no refunds, make it count...time is very short!
@dontcallmetravis Жыл бұрын
All that work and he leaves the tsuba unfinished steel?
@islandblacksmith Жыл бұрын
which one are you wondering about? they all have extensive finishing techniques from yakite (fire texturing) to controlled rust patina to heat blueing to (tea) tannin stabilizing...and protected by baked urushi, ibota wax or tung oil...all the traditional ways ^__^
@ajhproductions2347 Жыл бұрын
Your video is a true work of art. I love the calm, non verbal atmosphere. Where are you located? I would love to be able to just sit in and really learn from your methods. Amazing work my friend! And I love your two toed “ninja” shoes!
@islandblacksmith Жыл бұрын
much appreciated! on vancouver island, but there are hours and hours of video and plenty of photos and info on the website for study as well!
@N.M.E. Жыл бұрын
You're truly an inspiration to 'go that extra mile'! Magnificent.
@monkeykong6230 Жыл бұрын
Where do you get a hold of Urushi?
@islandblacksmith Жыл бұрын
should be able to order online from watanabe syoten or namikawa heibei...interesting stuff!
@Arthurian. Жыл бұрын
Clever method using the timber for leverage & the track for a break. Brake?
@Arthurian. Жыл бұрын
Your cinematography is so good. I hope someday you Make more videos, or make them available for purchase.
@tcg-77 Жыл бұрын
Nice...TQ...👍
@Webbblades Жыл бұрын
Thats wonderful, love your videos. The peace and quiet, absence of music. How is the silver/copper solder made or where can it be purchased?
@islandblacksmith Жыл бұрын
i usually use fine (pure) silver or sterling silver, but silver solder is available for jewelry work, it melts at a slightly lower temp so the copper is in less danger...
@hydroxide5507 Жыл бұрын
your channel is lovely, thank you very much for uploading. just read on your blog you needed to tear apart your workshop, did you give up smithing?
@islandblacksmith Жыл бұрын
no, i just had to unexpectedly get off the property i was working at...still working on a new location...thanks!
@marylewis3311 Жыл бұрын
🙏❤️🙏
@dlkravcov1973 Жыл бұрын
Too fast playback. Pleasant viewing should be longer .
@temnysh Жыл бұрын
Such a simple detail. It seems that it is simple. And so much work. Respect.
@islandblacksmith Жыл бұрын
thank you! detail is so important in the japanese craft tradition!
@elirobertson2324 Жыл бұрын
I watched your other video too and have learned a lot but am I to understand that you covered the knife in clay and clay hardened it twice??
@islandblacksmith Жыл бұрын
first hardened, then tempered...more info than you ever wanted to know: islandblacksmith.ca/process/yaki-ire-clay-tempering/ (but not enough to do it right, nothing beats experience!)