Anyone that wants to make the replacement easier get the CMC for an EM2 Civic, it’s direct fit to the 7th gen accord and it doesn’t have that that big triangle piece like the stock accord one which is also a shift delay so if you get the EM2 one it’ll be an upgrade and easier to install, and even more of a reason to do it the EM2 CMC is cheaper then the accord one, infact the Exedy brand EM2 CMC was $20 cheaper then the Duralast CMC from autozone. Let me know if y’all have any questions I’ll try to help as much I can

That blind nut is driving me insane

What transmission mount did you go with to fit

Anyone who’s struggling with the cauter pin i recommend taking a screw driver to pull the cauter pin off using the loop to secure the shank, worked like a charm for me

Are Adler clutch master cylinder’s reliable?? How’s it working so far?

No Clutch pressure on top of not able to shift into any gears. I'm guessing this would solve this? Already replaced clutch and slave cylinder. Haven't replaced master yet

does anyone know the part number?

what year Honda is this for?

TShhh tshhh tshhh

Hard to follow. Worst how to I've seen please take the time to actually explain next time.

Chew chew chew.

Frustrating job, took me almost 2 hours. Used my vacuum pump to pre bleed, that helped

Nice house, you know why, it's cause my money don't jiggle jiggle it folds

Nice house

This vid inspired my cb7 euro r build

That’s me but I’m 10 now!!! Edit I’m 11 I’m 12 now 13

THAT COTTER PIN IS THE MOST EVIL FUCKING THING IN THE WORLD i will never ever ever change another one of these in an accord

If anyone is about to do this job. A tip would be to have someone weld a nut (the same size and thread as the master cylinder mounting nuts) To one side of the master cylinder fork. (The Part that the pin goes through) And now you can use a hex head bolt to connect the master cylinder to the pedal. Eliminates that pin nonsense

I hope that McDonald's job working for u

This has to be the worst hack vedio On a hack upped car I have ever seen Your moron ass said 3/8 When it's a 10 millimeter And half your wiring harness Is just hanging out in the video Just show how much u have no clue wtf your doing But you feal u have to have gloves on Cause your amateur .... I wouldn't let you work on my tricycle add I'd thinks he might get aids from a care ... You have no idea how to work on Lmao HACK

You funny dude , working on a 95 CD with euro r FRONT JDM CLIP yes even headlights and fenders and come with the Euro r engine .. #hseriesgang

Any ideas why it's hard to put into gear ?

I appreciate the video man you would be the only cb7 doing a clutch master cylinder replacement. But it is a bit hard to see exactly what you're doing cuz the camera is not getting in good spots so having a hard time seeing stuff. Damn it mine would go out and i need to do this work. How difficult was it for you to bleed the system? That's one of the things that's making me worry

Stupid question but is than an h22 I see????

I just replaced the slave and the master clutch and still have no pressure and pedal goes to the floor. Any ideas?

I'm gonna need to do this my clutch doesnt come back up all the way and its leaking a hell of a lot of brake fluid inside the car

My clutch pedal randomly sticking to floor will new master fix? What were your symptoms?

I just brought an h22a back to life. Im siked

Hey Aaron What parts did you need exactly to hook up the cruise control? And also Im looking at Rosko racing what did you need for the iac parts? Im close to pulling the trigger on this motor but Ive yet to see a complete write up on it

Were you able to keep cruise control?

What angle of needle nose are best? I've tried straight and some 90-degree versions and neither worked.

I got a lsd transmission with the h22 it came with the mid shaft what axles can I used they told me the accord wouldn’t fit any idea

So if I use my stock one can I use the h22 bracket or haves to be the same as stock from my f22

You use the h22 power steering pump

I did everything mentioned in the video. But im leaking fluid from the top of the nut where the line goes to the master cylinder. I pulled the line out to check the flare and threads on the nut, theres no cracks or crossthreads. Does anybody know what it could be?

Is it still working? Mine is getting ready to fail I was thinking of buying honda parts what brand did you use?

Anybody else catching hell with the metal line on the top? It breaks but the line seems to torque along with it.

I want to do that to my 02 accord using the euro type r engine. Anyway you can hook me up with a list to what I need to do or a link ?

A fellow Cb7 owner, I have a 91 lx sedan that’s still stock besides the borla exhaust, I love you car

I wish I could give you more thumbs ups.

Current task....I hope this fixes my issue with the clutch being stuck to the floor

Looking to buy an H22 Euro R, how do I know its the Euro R when im buying it?

Euro r must pull like crazy. I'm saving for a euro r atm. Want to pair it with a qsd h2b and gsr trans.

what wrench did you use to remove the blind nut? u said a deep 12 i think? i cant get to it

That cotter pin is a dirty bastard. I highly recommend heeding the advice in the video and getting angled needle nose. It's bloody impossible any other way. It's why I'm finishing this job tomorrow.

I was wondering what year and model car your aem intake was for? Thought it would be worth asking since you seem to be pretty good about replying to comments. I've got a 92 coupe with an h22a I swapped in. I've tried a couple intakes as suggested by people in old threads on cb7tuner but they wont clear my abs module..

Very cool. What motor mounts did you use for the install and who did the wiring harness upgrade? What. ECU are you running? Werw both cars oroginally equipped with A.C., Cruise Control and Manual transmissions? Just picked up a. 92 Euro 2 door Accord Automatic with extremely low km.

clean swaps! ive got a 95 ex sedan w sir f20b/2t4t trans w bunch of goodies on it. also working on a k24/k20head for my 91 crx si.

Brother need help how did you connect the map sensOr please help me out

Question and probably dumb but you say the amenities to make it work. Is that from obdII to obdI