I honestly do not know if it will

I haven't had any issues and haven't noticed it hitting

@@YARCWestthanks, bro.

In this truck, I kept the motor that came with it and only replaced the servo and ESC.

Best of luck!

They really did a excellent job with the electronics on this one, normally RTR electronics leave a lot to be desired.

The HB R1001 for sure

It's a Weller Soldering Mat that I found on Amazon. I just wish they had some different colors. amzn.to/4a1P51C

@@YARCWestThanks!

The 1060 is really good for the price, really hard to beat it. I was able to repurpose this 1060 into another truck.

They are oil filled and I think "halfway decent" is a pretty solid description of them. The truck is on the smaller end of the 1/10 scale trucks.

That's fair haha! I didn't want to bother with it but I'm pretty sure it is a few screws to take out the interior and then a screw at the bottom that attaches both the head and the hat.

@YARCWest hallo, ein schönen guten Morgen wünsche ich Dir, vielen lieben Dank für Deine schnelle Rückmeldung, Dankeschön, ich möchte mir auch gerne nächstes Jahr, also 2025 ,auch diesen tollen Toyota landcruiser kaufen, ich besitze auch schon 2 FJ 40 in gelb und blau bin sehr zufrieden mit den beiden Fahrzeugen der Firma ( FMS) daher ist jetzt das Interesse an dem tollen Auto, Gruß Matze aus Germany, Dankeschön nochmal und ich wünsche Dir und Deiner Familie auch schöne Weihnachten 🎄

I just pulled the front of the interior loose from it's double-sided tape mounting to put the cap on the driver with the 2 bits of double-sided tape provided.

Sincerely appreciate that, I really do. I need to do a follow up video because I did run into issues with the drive shaft, not sure if it is a one off thing or poor parts.

@@YARCWest I think this kit and RGT Tracer are last models before major change in design and quality. EX86190, EX86130 aka Pro Runner and EX86170 Pro are awesome trucks. Those last two I own. Pro runner is a beast. Great out of the box. Well equipped and great quality. Challenger Pro is next level. Fusion and brass in RTR ? No one is doing that. RGT is on fire. Their newest Pathfinder release is amazing.

I didn't run the greens only because I was worried they would be too soft but from everything I've heard they're fantastic on this truck.

For sure! Super inexpensive too, pleasantly surprised

@YARCWest saweet I just ordered grizzly works ones for my scx24 🤙✨

Found it in description tab 🙃

Yeah Etsy 3D printed body

Appreciate the feedback!

@@YARCWest ya sure U betcha 🤓

I'm pretty happy with it! My first LC80 (not counting the EazyRC one)

All in all, I think they did a fantastic job with this truck. Thanks for checking out the video!

Thanks, man!

Thanks for checking it out!

Thanks! Love the way it looks on the trail

I guess it depends on how much you value scale looks, I will say that the Basecamp is one of the RTR trucks I've ever ran

Yeah it's pretty cool, appreciate you stopping by!

Same schematics for sure

Thanks!

I haven’t broken anything yet but if I did break an axle that I couldn’t fix I would check Banggood first before risking a Traxxas replacement. If I broke a link I’d probably just buy any links that match the length from Amazon.

@ perfect thanks, I will do the same then, because in aliexpress they dont sell parts for the hb r1001 concretely, but in banggood they do sell them, from the manufacturer of the car. There are some videos of people saying that traxxas axles work, but I will not risk it either, since it seems the stock axles are quite good. Thanks again!

Yeah I’ve heard that too

@ I wonder if the body’s are compatible if so that makes the wltoys12428 a very part compatible car

That’s a very interesting point

That’s awesome!

It takes a little bit of work to upgrade the motor and servo but it's not hard at all. The Remote that comes with the truck will still work. The remote, or transmitter, ties into the Receiver, which I left alone in my upgrades.

They certainly will!

Thanks, I appreciate that! The wheels and tires on the Bronco are JConcepts Ruptures and a set or Treal metal beadlocks. In the upgrade video for the truck I have some links to everything that I ended up using.

@@YARCWest Thank you so very much for your help ! I really appreciate learning from your videos ..... 🙂

I was able to fit the wheels on another set of tires for a different truck so it all worked out in the end!

The FCX18 version came with the lift and the tires are 1.3inch

Thanks, man!

I either use a 2200 3S or 5200 2S, I usually get about an hour of run time but I almost always in low gear so it lasts longer.

@@YARCWest I see. The other vid i saw he's using 8400s 3s battery, it runs more than 2 hours. may be u should try

I did, in the Upgrade video I swap out the ESC.

I haven't had an issue with the diffs yet and I can't speak to parts availability specifically for that, but I've seen other replacement parts on Banggood. If locking diffs are unimportant to you, I'd def go with the Bronco.

There should be a switch on your transmitter for St Rev (Steering Reverse), just flip it

Thanks for the sub! This truck is pretty fun as long as you stick to scale trails lol

@ yeah I’d bet that’s true, but still, it looks cool as hell doing it.

@MidwestRCcrawler for sure! I love the look of it. I got my hands on their newer version that has a new body, kind of C10 look

Thanks for checking it out! About 24 on 2S, I haven't ran it on 3S yet.

Hey! The links for the tires are in the description of the videos where I find the upgrades. Bronco are JConcept Ruptures and the Wrangler are the tires from the Ascent Fusion. I like the Ruptures but the more I run the Wrangler the less I like the Ascent tires, I just don’t think they do well enough in the environments I run in. I haven’t changed out the shock oil but all the stuff I added to the Bronco have made it very heavy.

@@YARCWestgreat, thanks! I am also adding a lot of weight(brass, rims, light bar, silicone inserts, undercarriage shields…) and I was debating to add 100cst/10w shock oil or leave it stock, I like soft realistic suspension movement, what do you recommend? Thanks again

I would run with it how it is and if you don’t like you could always changing it for different weight

I used the stock servo horn, it’s metal so no need to change as long as the teeth match

@ great, thanks!

I got a puppers for the passenger seat

I use this one, it's inexpensive and I haven't had any issues with it amzn.to/3NNKAgG

Thanks, I appreciate that!

@YARCWest you're welcome and just subbed 👍

It's a pretty fun truck!

I did consider trying out the RC4WD interior on this but don't want to waste money if it doesn't fit

Thanks, I’ll check it out!