3 Prong Fishing

Пікірлер

@chaseerry 5 күн бұрын

Good video. It’s so difficult to get all the air out of the system after doing this job. 😑

@snowchopperrecords3512 Ай бұрын

Absolute waste of my time. No real instruction!

@greauxpete 2 ай бұрын

Yall need a bigger table..

@greauxpete 2 ай бұрын

Nice. Thank you for doing this!

@mack7338 2 ай бұрын

.Found same problem with my steering housing. Power wires going in housing weren’t sealed enough to prevent water intrusion sealed it with silicone. Replaced motor and put a bead of silicone around steering housing to help seal it too.🤞

@DanielMendoza-gd5rx 3 ай бұрын

Was it plug and play with the head unit??

@itsgrowedinrocks 4 ай бұрын

Great video. Thanks for posting. I'm getting ready to tackle mine this fall after boating season.

@AlxDv 4 ай бұрын

Awesome. Just got an 01 on with my new hull. What are you guys experiencing w these in terms of longevity? Hours/years wise.

@thomasjohnson9768 6 ай бұрын

thanks my issue too.

@lordoftheriffs79 7 ай бұрын

Hello, I have a 2023 F115LB, and a kicker motor, F6C. The kicker is fed by a 6 gallon portable Yamaha tank with the stock connector. In the case I run out of fuel for the main engine, is there a way to use the hose and connector for the kicker for the main engine?

@patrickdalton9711 7 ай бұрын

Music too loud

@BarryReese-rk7us 8 ай бұрын

My Garmin 94sv does not show my current track. Just stopped or I hit the wrong button. How do I find the right settings to turn it back on

@bullfighter1801 9 ай бұрын

What is the plastic adapter fitting that screws on to the quart bottle? Thank you

@SWFLFISH 8 ай бұрын

It came with the bottle when I purchased it

@KeithJohn-qd6pr Ай бұрын

was pretty safety conscious until that point!

@schalachi 9 ай бұрын

Which subwoofer did you use? I fogured it was better to buy the mono plus a 4 channel

@SWFLFISH 8 ай бұрын

I used the fusion 10” marine sub

@MrNakedLandscaper Жыл бұрын

This was a brilliant video but you didn't replace the Tilt cap! The Tilt cap looked mashed up too.

@SWFLFISH Жыл бұрын

Yes it looked mashed but the inside was perfect and it was not leaking after I put in the o-ring , thanks for watching

@foff-666 Жыл бұрын

@ 1:08 that is such a danergous thing to do - you can EASILY lose a finger. hydraulics let go when they hit air bubbles. nice.

@jorgesculidis8142 Жыл бұрын

Good jobs brother

@kobi1606 Жыл бұрын

Tip: Don't give the conductors a haircut. The ampacity is greatly reduced by cutting the conductor, the crimp connection will get hot and fail. Look for a yellow sleeve crimp to fit a #10 conductor.

@NormanNeumayer Жыл бұрын

WD40 is a solvent. Not a lubricant.

@SWFLFISH Жыл бұрын

Yes I agree with you, trying to keep the salt away from all thing metal on the trailer, helps in the maintenance and slows the rusting when operating in salt water, hope you like the video, thanks for watching.

@cameronpaulk4449 Жыл бұрын

How do you know when to stop filling?

@SWFLFISH Жыл бұрын

It will pour out

@hookersterminaltackle Жыл бұрын

I'd love to see how you got the rope through the floor. The factory string is total crap and broke.

@SWFLFISH Жыл бұрын

I used the wire fishing rods I bought at harbor freight, works great , big takes two ppl and some patience. Then I attached the wire and pulled it through.

@therukugorillazaotearoa_ Жыл бұрын

What year is it ?

@SWFLFISH Жыл бұрын

2010

@gabylon1992 Жыл бұрын

Your transom was full of water. It’ll be rotten or delaminating in no time.

@vitoscatigno4207 Жыл бұрын

The strap bolt should have a little movement and not be that tight.

@SWFLFISH Жыл бұрын

Thank you

@adl2005 Жыл бұрын

when changing the gear oil i always make sure i can open the top screw because if it stuck you can not fill the gear box back up once drained.

@2hotscottpro Жыл бұрын

I have the pmx 1 model in a camper with sub and 2 speakers inside and 2 speakers outside.How do I switch from inside to outside? There’s a sticker says push round dial but doesn’t change anything on screen.And inside keeps playing. Haha I thought I asked you about this the first time I watched this vid😂

@SWFLFISH Жыл бұрын

You might need to download the manual, I don’t think there is a way to shut individual channels off , but I could be wrong,

@2hotscottpro Жыл бұрын

@@SWFLFISH ok man ,just thought you might have known .Thanks for reply so fast man!

@codyreece7871 Жыл бұрын

What about the center one i have my shaft out but can't get the cap off. The bottom looks like the bottom of the ones you took off then the top has the thing the round pin goes threw connecting it to the motor. I can't get either end off and can't find nothing about the center one

@SWFLFISH Жыл бұрын

I don’t understand?

@codyreece7871 Жыл бұрын

@@SWFLFISH my tilt and trim has 3 caps . One in the center with a rid that connects to the motor with a pin,like that holds on a Reece hitch, threw it on the top end you disconnect. No worries I have my cap off now the bottom unscrews I just used a pipe wrench

@ride-it-outtimandtoni232 Жыл бұрын

@@codyreece7871the two he changed were the trim cylinders. The one in the center is the tilt cylinder. Usually the dust caps get clogged up with salt and debris causing corrosion on the shaft which then causes the inner seals to leak. Im changing my tilt seals today but not seeing any videos on this.

@codyreece7871 Жыл бұрын

@@ride-it-outtimandtoni232 I ended up getting my off. The bottom round thing on the shaft unscrews. I just took the oring off and used a pipe wrench to unscrew it

@Cotton603 Жыл бұрын

When i trim down a ton of foamy fluid comes out the top of the cylinder is that normal

@SWFLFISH Жыл бұрын

No it’s not , your seal is broken and leaking

@knez8034 Жыл бұрын

Awesome and informative video. Dove into this job myself and one thing that helped a ton on a few other videos were the links to the tools and materials needed for the job in the description. Feel like that would have made this video a one stop shop deal. Solid content nonetheless!

@SWFLFISH Жыл бұрын

Thank you , I will start to include the links, thank you for watching, hope it helped you out

@tracyburgess5590 Жыл бұрын

Another water logged CS

@juju1896 Жыл бұрын

Great video. I'm curious what year your engine is. I’m learning my way around a 2008 Yamaha F200TXR. My hood is shaped just like yours. I can see the seals on my port cap are leaking a little. Thanks for the instruction.

@SWFLFISH Жыл бұрын

Yes buy that tool you will thank me later , it’s a pain but the tool saves you time and money in the long run. Glad video helped you. My engine is a 2010 Yamaha 115

@NunyaBizz_22 Жыл бұрын

To folks looking this up- you can use normal automatic transmission fluid for this if needed.. check your fluids about once a week if you’re an avid boater 🤙🏼

@SDADDYWSL1TR3Y Жыл бұрын

Is there anyway to remove it without buying a specific tool

@SWFLFISH Жыл бұрын

Yes but you risk damage to the top and the top is pretty expensive, if you going to have the boat a while , buy the tool soooo worth it , you will thank me later, if not you will spend like 1h hitting it to get it off , I tried

@SDADDYWSL1TR3Y Жыл бұрын

I just got my end cap today and my tool comes in tomorrow, hopefully I do everything right , my only worry now is that it just doesn’t work electronically lol mechanic said it was all good electronically but just leaked hydraulic fluid so I’m going to replace the cap and also I hope I don’t make an error over filling or under filling the cylinders with hydraulic fluid

@puzer1 Жыл бұрын

@@SDADDYWSL1TR3Y ...even the Marinetech tool doesn't always work...I've had to air chisel the cap to break it free more than once...that's why it's silly to not buy the cap with the seals...you should be considering the cap as a wear item...

@juju1896 Жыл бұрын

@@SDADDYWSL1TR3Y how did you make out? I may want to do this at the end of the season.

@SDADDYWSL1TR3Y Жыл бұрын

@@juju1896 no success, tool does not work on stubborn stuck caps lol

@bradmcclendon4597 Жыл бұрын

Excellent video -- I greased the points on the engine and the wheel hubs on the trailer -- thanks for the step by step instructions.

@SWFLFISH Жыл бұрын

Yea keep them greased like every 6 months or so , if you don’t go far they don’t heat up and get rid of the water inside, grease works good

@JA-gx4hb Жыл бұрын

Thanks for posting. Now do a video on changing those leaky seals.

@SWFLFISH Жыл бұрын

I did , kzbin.info/www/bejne/e4rMdnafpsh4fMk

@SWFLFISH Жыл бұрын

Thanks for watching 🤙

@Sharky2901 Жыл бұрын

What do I do please when two heads of the bolts are broken

@SWFLFISH Жыл бұрын

You will have to use a screw extractor or drill them out

@Sharky2901 Жыл бұрын

@@SWFLFISH i cut the rest of the head of and it came of Thank U ☺️

@romer431 Жыл бұрын

Thank you. Thomas Denmark 🇩🇰🇺🇸

@cjharrin Жыл бұрын

@christiandaniel6238 Жыл бұрын

Pas de graisse sur les culots de bougie c la masse elle sont traités contre la corrosion à l,origine info ngk +les les autres

@SWFLFISH Жыл бұрын

Yes I put grease on the spark plug threads , anti cease

@coreywallace1362 Жыл бұрын

Dumb question same motor once it hits the trim rods is it normal to be that slow going to trim down to transom feel like mine is super slow

@SWFLFISH Жыл бұрын

Hey Corey , yea mine is slow too, it’s supposed to be slow , then the big one goes faster

@NunyaBizz_22 Жыл бұрын

Yea , - as you already know.. but the REASONING for this is when you are that low in trim, the corrections are smaller due to the speeds you may be at for low trim( on plane perhaps) so your trim inputs don’t “over correct” per se

@roblavazza2201 Жыл бұрын

I have the uhd94sv I was doing updates while the boat was in the driveway on the trailer last year and my transducer burned up. It was terrible so much interference it couldn’t be used, I had to buy a new one. Any time you power up that garmin out of the water push the power button andthen select disable all sonar. Happy fishing!

@SWFLFISH Жыл бұрын

Wow I didn’t know that, never even thought it could burn out, thanks for sharing, tight lines

@antonioprado8068 Жыл бұрын

@3 Prong Fishing so I can't use the same card to have updates, routes and activecaptain on it? I wouldn't want to have a bunch of different cards

@FaithwalkerTodd Жыл бұрын

When you checked the contents of the separator, shouldn’t you have looked in the bottom, where the water would be? The first half that you pour out is going to be clean gasoline because gasoline is lighter. It will be on the top. Not until you get to the bottom of the canister will you find the water.

@SWFLFISH Жыл бұрын

Yes , you are correct but I poured all the contents of the filter into the glass container just to check it. I baby my engine a lot. I use sea foam every other fuel up and just when I have extra cans laying around, I know my fuel is pretty clean, just wanted to show how to check it by pouring the contents of the fuel filter in a container so someone can see if they have fuel issues. Thanks for watching , hope this helps you out. Let me know if you have any other questions thanks

@FaithwalkerTodd Жыл бұрын

@@SWFLFISH I appreciate the effort. But it seems that it would be better to show them the proper way. In the video you show pouring out half the canister into a small glass bowl. You need a large jar at least as big as the container. By watching your video an uninformed person might not look at the bottom of the separator that’s the only reason I brought it up. I can see you take good care of your engine.

@SWFLFISH Жыл бұрын

Yea I should have shown where I poured the whole contents in a bigger glass jar , now you gave me a good idea for my next video. I will be recording one when I change it out this season, thanks for the feed back. Keep a look out for the new video. 👍