thank you so much for making this easy vid and for the link as well! ordered it for hubby to install!:)
@jeremyzebrowski37624 күн бұрын
Almost two weeks later and I have had zero issues. It has been working perfectly.
@GeneB-ok1pd2 ай бұрын
Thanks for a great 👍 video. We also have a Kalorik Maxx. Even though ours is a different sub model than the one in the video this information still helped in getting our air fryer back up and running. Thanks again.
@uglyboi27353 ай бұрын
Dammit, I wish I could attempt this as mine died but I probably could only get as far as opening it. Maybe I could solder it but not much experience, then I'll be stuck at fixing the wire if that is the issue. When I have more time I'll probably get to it, thanks for the video!
@livlaffluv3 ай бұрын
Thank you for making this video and linking the bojacks! I was able to fix my airfryer!!
@andreasprings55023 ай бұрын
Hi, this was an even paced, and informative video. However, I have power, but no heat. Do you have a video for that?
@jeremyzebrowski376Ай бұрын
Sorry no. This issue has not happened to mine yet. If it does and I figure it out I will be sure to post a video. Good lock!
@kirkffolkes-brown24324 ай бұрын
This video was a life saver!! Thsnk you!
@arthurgutierrez54364 ай бұрын
How to fox if not heating even all controls and power are working justing problem? Thank you
@newchanceanimalantics80964 ай бұрын
Is this same air fryer still working after fixing it?
@robertcharpentier4454 ай бұрын
have you had issuers with the touch screen not working after it gets hot i dont lose power but keeps shutting down id send a video but dont know how.
@jameszanghi35644 ай бұрын
Awesome life saver! I just twisted the two wires together so hopefully I don't die
@denisedubois42234 ай бұрын
Thanks to your awesome and easy to follow video, I managed to fix my Kalorik Maxx all by myself!!! Thanks again!!
@msaftabe5 ай бұрын
Can you please send me the link in Amazon of what you bought so I can buy the exact same thing I do appreciate it
@myrnacaban38707 ай бұрын
My Kalorik oven stoped working within approximately 6 months after I purchased.
@myrnacaban38707 ай бұрын
Thank you so much - my Kalorik oven went off while I was using it, now I know how to fix it.
@Robert-bo1iq7 ай бұрын
Thank you for the info 👍
@NorthernRailsTrainsInTheNorth8 ай бұрын
This happened to ours. We ended up getting a new one via warrenty but good to know incase it happens again!
@jeremyzebrowski3762 ай бұрын
I didn't want to deal with the manufacturer
@NorthernRailsTrainsInTheNorth2 ай бұрын
@jeremyzebrowski376 believe it or not they weren't bad to deal with and the process itself was easy. Only downside was it took awhile of back and forth communication until we got the new one in the mail. Vs just going buying the part and fixing it yourself
@marockf9118 ай бұрын
Name the fuse please
@beckertina489 ай бұрын
Why is there ending? Did it work?
@jeremyzebrowski3762 ай бұрын
Second video finished it up. I messed up the recording. Everything is still working perfect
@mathieuasselin84319 ай бұрын
Thank you for this video, we fixed our problem in 10 minutes!
@caballero11559 ай бұрын
Sf184f 184 grados 16 amp a 125
@RLoose94949 ай бұрын
Thanks good video. Didn’t even have to watch the whole thing. The first two minutes primed the pump tore mine apart found the thermal link used the ohm meter and checked the cord and link. Yep bad link ordered a dozen good to have on hand. Just verify your amps, V and °. Thanks for sharing as well in this throw away society we live in it’s a shame many people don’t even try and fix them.
@neekolatz10 ай бұрын
Great advice!! Replaced the fuse I simply cut the fuse out and left some of the fuse wire on each end and soldered new fuse in i looped the fuse with original metal wire and soldered so easy.
@anthonyg692410 ай бұрын
Did the new fuse continue to work or did it blow also? Thanks.
@jeremyzebrowski3762 ай бұрын
So far mine has continued to work great. It's been a year
@anthonyg69242 ай бұрын
It's been around 8 months since I did your repair and it running without any issues. Looks to be like the manufacturer got a bad shipment of junk fuses. Thanks much for this video! Very very useful.👍🏻
@anthonyg692410 ай бұрын
Awesome, thanks!
@peterfalcetta4086 Жыл бұрын
Thank you Very much !
@nicolettehunte4400 Жыл бұрын
I have a question. When I am soldering it do I cut the gold piece that are holding the wires under the plastic together or just the replacing part?
@msbutler59 Жыл бұрын
My wife bought a pack of 10 SF184E rated 184 degrees C, 10A, 250V. It works.
@msbutler59 Жыл бұрын
Thank you for your video. I didnt have the solder gun so I used some butt connectors. Success. I'd rather solder so the sheath would go over repair like yours did. I had to cut the sheath and tape it back together with electrical tape. Most important, wife is happy.
@user-dc4po5bc6s Жыл бұрын
Great Video. I have the same problem and the same lack of voltage. Ordered thermo fuse from Amazon, will install tomorrow. Thank you so much for your help.
@nicolettehunte4400 Жыл бұрын
Hi can you let us know if it works thanks.
@user-vk1xq9iv7r Жыл бұрын
Planned obsolescence . Mine just died...Thnx for the vid.
@AhmadKhan-fz3wy Жыл бұрын
Love that, easy and simple to fix, thanks
@MrHumanfactors Жыл бұрын
where is part 2
@albertosoto8592 Жыл бұрын
You should show how to remove the fuse
@TMac4734 ай бұрын
If you need it shown then you should stay far far away from electrical work of any kind.
@priMARYlove1 Жыл бұрын
Thx for making the video. Do you just cut the old fuse or is there a better way to remove it? Also what is crimping if I don't have a soldering iron? And last question, is your AF still working? Thx
@jeremyzebrowski3762 ай бұрын
Yep. Just cut it out. Still working great
@kathleenelam3391 Жыл бұрын
My fryer went out my husband and I followed this demonstration. 😢😢we were afraid to hook it up, Harvey went in the other room , too afraid😢 to test it. WOW! It is still working. YES! It is working like. Pro
@HAILtheGREAT1 Жыл бұрын
how has this held up 3 months later? and did you solder or crimp the fuse in? thanks in advance.
@DelArtist-190 Жыл бұрын
Great video. Wonderful advice and instruction. My Kalorik uses Fuse # RY184C - Haven't found a replacement yet. Can we replace this thermal fuse with a new fuse-type coupling unit which allows for easier replacement?
@gold8664 Жыл бұрын
That’s going to go bad especially with all the heat
@albertosoto8592 Жыл бұрын
Why, cause the tin welding?
@MRbigBearJR Жыл бұрын
Soft solder melting point is 190 - 840f depending on what you’re using. If the fuse is rated for 180 degrees it will pop again before the solder is affected. But crimping would be a good idea if your prefer.
@HAILtheGREAT1 Жыл бұрын
@@MRbigBearJR Another vicitm of this shotty device. We should get a class action against Kalorik. in the meanwhile have you replaced with another fuse that has held up better. if so can you share where to source it and did you go with the solder or crimp? I dont have much experience with appliances but grew up working on cars so I can get by with enough cummulative pointing in the right direction. thanks in advance.
It has been working fine for over one year now. Maybe the fuse kalorik put in was trash. I didn't want to go hotter on the fuse because I would rather the fuse pop then start a fire.
@lahmimsi Жыл бұрын
Thanks, it s very helpfull. It s about 1 year I didn't use my airfryer. thanks very much
@blairfright9622 Жыл бұрын
You never solder a thermal fuse as it will change the temp on when it shuts off also if it gets to hot it could melt solder and cause a fire . Use crimp on connectors.
@emmanuelperezchica4735 Жыл бұрын
Why not use a fuse that can withhold 240°C
@TB_SnEaKy8 ай бұрын
That's what I decided to buy. Same 10a 250V just a higher temp rating, I hope this works.
@jeremyzebrowski3762 ай бұрын
The temperature rating is manufacturer specific to keep the unit from starting a fire
@gustavoventurin2 ай бұрын
@jeremyzebrowski376 problem is this model air fryer can get up to 500F, which is the equivalent of 260C. While the fuse is not located within the air fryer itself, the ventilation on this is piss poor, with such a small fan that doesn't disperse heat very well. I would bump the thermal fuse to a higher rated one, or at the very least, replace the fan with something more powerful.
@bryanjackson9671 Жыл бұрын
Mine came with a RY 184 TF..
@albertosoto8592 Жыл бұрын
Es más comun encontrar el de 185° igual le es compatible
@donaldmcshane4696 Жыл бұрын
thank you, just fixed a relatively new oven. unfortunately the doors not work as it did once we put everything back. But the oven worked
@guillermoescudero743 Жыл бұрын
Thank you Jeremy, it was very helpful to fix my air fryer
@ryanj2235 Жыл бұрын
Is there a polarity on the fuse where you can only put it in one way or can it be put in either way? Not an electrician or electronics hobbyist.
@jeremyzebrowski3762 ай бұрын
No polarity. Can be soldered either way. Only diodes are one way
@comeliusmcelveen4929 Жыл бұрын
Really good video, easy to follow and understand. I have the same problem but now have a very good idea on how to check it and fix if the problem is the same. Thanks
@davidlewis7490 Жыл бұрын
I would have liked to see a ground to the appliances cabinet. Do you have any idea why isn't there one?