BrokeMX

Пікірлер

@regnor166 5 күн бұрын

For the music during the vapor blasting get too loud compare to the average sound of your video. Looks correct at the end. Thanks for the videos

@BrokeMX 5 күн бұрын

I apologize I usually try to normalize it, was in a rush trying to get my computer functioning after hard drive crash. Should have everything in place now to improve future videos. Thank you for the feedback

@supertrucker200 12 күн бұрын

I can see this bike being completely redone with the frame blue green plastic with blue and white badging white renthal bars and blue rims I love these bikes

@user-dn5ok5fz1t 15 күн бұрын

I hope you are aware that not all bearings are created equal. The Chinese made bearings that are super cheap are made with severely inferior materials. They look like decent parts but they simply do not hold up. The metals they are made from and the heat treatment they receive to temper the metals properly is severely inferior to a factory oem bearing from Japan. Basically you are really asking for it when you buy cheap bearings.

@BrokeMX 14 күн бұрын

I am painfully aware of this from working on cars, even the ones that come from Detroit axel nowadays are junk…, I try and use stock when possible but sometimes you have to go outside the box and find the best alternative. Thank you

@rockman49er 17 күн бұрын

Reminds me of the American made bike in winners take all 😮 are those oem plastics looks awesome 👌

@BrokeMX 16 күн бұрын

Thank you, no revolutions plastic and tank ordered through mx revival, which is now mx skills shack

@rockman49er 16 күн бұрын

@BrokeMX right on isn't mx skill shack in Hollister California really close to my area like 20 minutes away I'm trying to get them to rebuild a shock for me those guys are funny 😁

@BrokeMX 14 күн бұрын

@@rockman49er kzbin.info/www/bejne/d6urdohme8ySmassi=zDs-joD5tXgikU_h I think they’re in Utah now?

@rockman49er 17 күн бұрын

Nice looks fun i just restored a 98kx250

@BrokeMX 16 күн бұрын

Glad to hear, hope you enjoy it

@larrywarner9314 17 күн бұрын

I run that carb through an ultrasonic cleaner

@BrokeMX 16 күн бұрын

Haven’t gotten one yet, I’ll have to look into it

@michaelroberts6299 18 күн бұрын

IM TOLD A SHEEP'S WOOL WHEEL IS THE BEST WITH A POLISH, THATS AFTER THE TANK HAS HAD A HEAT GUN RUN OVER IT , THE TNT MOTOX CHANNEL GUY BRINGS HIS PLASTICS UP BETTER THAN NEW

@BrokeMX 18 күн бұрын

Awesome, thank you

@emeraldsjeepjourney 19 күн бұрын

I need a tank bad are you interested in selling

@Gordupnorth2 20 күн бұрын

I ordered all my transmission bearings from Babbitts online parts warehouse. They had everything

@BrokeMX 20 күн бұрын

Thanks for the info

@92peterbilt-Mel 20 күн бұрын

I wish I can find my 1991 KDX200 in this condition and rebuilt the Whole Bike , in my 20's I usually win Enduro back in My country Dominican Republic, now Im 48yrs old . I want to show my 21yrs old Son , Kawasaki, was superior than his KTM, Sherco sht.. KX, KDX, CR, CRM are Trophies bikes BTW I hate Honda guys they make me eat a lot of Dusts lol

@BrokeMX 20 күн бұрын

That would be awesome

@joelatkinson2080 20 күн бұрын

Another great video!!! Lots of great information!!!

@BrokeMX 20 күн бұрын

Thank you

@rztrzt 20 күн бұрын

Why don't you order all your bearings & seals from a bearing supplier? Kawasaki doesn't make bearings, they source them from bearing manufacturers. I've never come across a bearing I couldn't source from a bearing supplier.

@BrokeMX 20 күн бұрын

I agree, some of them can be a little difficult if you don’t have a number and you’re going off of dimensions. Just trying to keep it simple on the video so people that don’t know can see that there are other options. Thank you

@rztrzt 20 күн бұрын

@@BrokeMX I still remember bank in the day when ktm came out with pds rear suspension, the lower shock mount used a teflon or something like that heim joint. KTM dealerships charged a stupid amount of money for them and everybody said they're not available from anybody but ktm. I sourced them back to INA Bearings. I ended up selling them at half the ktm price and also offered a brass version people could grease via a nipple.

@BrokeMX 20 күн бұрын

That’s awesome, there is almost always a solution if you have the desire and patience to find it.

@robertbrissie8645 21 күн бұрын

Final question. What did you use to remove the linkage bosses? Lots of material there to deal with.

@BrokeMX 21 күн бұрын

started with rasp and moved to discs, links below. good luck www.harborfreight.com/high-carbon-steel-rotary-rasp-set-10-piece-62694.html www.harborfreight.com/2-in-surface-conditioning-kit-11-piece-60753.html www.harborfreight.com/pneumatic-14-in-angle-die-grinder-58909.html

@jeremyhaddix9561 22 күн бұрын

Check out black cloud customs he does the same stuff good video

@BrokeMX 22 күн бұрын

Will do thank you

@joelatkinson2080 23 күн бұрын

Another great video!!!

@BrokeMX 23 күн бұрын

Thank you

@AZVIDS 24 күн бұрын

“The good news is that there is still some green paint on the frame…”😂🤣😂🤣😉

@BrokeMX 24 күн бұрын

😂🤣🥲true…

@jesuscaballero3094 24 күн бұрын

I have a 93 parts bike if your interested buying some parts off I’d let them go for cheap or free if you just pay shipping

@BrokeMX 24 күн бұрын

I appreciate that, let me go thru and see what I’m still missing. Thanks

@rianotrijaya246 24 күн бұрын

Not the best for restoration, you almost buy everything for the bike 😂

@BrokeMX 24 күн бұрын

Almost…

@Gordupnorth2 26 күн бұрын

I eventually had to cut my rear axle off, it wouldn’t come free with penetrating oil or heat

@BrokeMX 26 күн бұрын

Sometimes there’s nothing you can do.

@paulbudford 26 күн бұрын

I can't believe those cases were salvageable. That's a great result. 👍

@BrokeMX 26 күн бұрын

I know, the bearings were tight enough to keep out the air and water, I was surprised also

@larrywarner9314 27 күн бұрын

Kroil is wut you want for penitraiting those old bearings and axles

@BrokeMX 27 күн бұрын

The pb worked pretty good this time to break the axel loose from the spacer, but I’m always open to new ideas. Never heard of kroil before, it must be good…, they are certainly proud of it. I’ll have to give it a try

@larrywarner9314 27 күн бұрын

Wut I do is use a cheap cookie sheet set your oven at 500 and put the case in for about 20 minutes and the bearing should fall out

@BrokeMX 27 күн бұрын

Thank you

@larrywarner9314 27 күн бұрын

I've seen worse bud

@BrokeMX 27 күн бұрын

Yes sir, I know.

@michaelroberts6299 28 күн бұрын

the 1990 kx transformed mx like no other bike, others copied the frame design around the tank and the fluro colors the magazines went for a glossy cover it also changed the clothing colors the bike never got the recognition it deserved!

@BrokeMX 28 күн бұрын

Agreed sir thank you

@michaelroberts6299 27 күн бұрын

@@BrokeMX blessings from new zealand

@diontecottman4092 28 күн бұрын

Hey john im catching heck finding parts for my 96 kx125 is there any other years i can use parts off of i cant find a jug anywhere

@BrokeMX 28 күн бұрын

Email me, and we’ll see what we can figure out. [email protected]

@BrokeMX 28 күн бұрын

I think the best information available on these swaps comes from TurboDan. www.thumpertalk.com/forums/topic/1228473-kx-125-cylinder-swap/

@paulbudford 28 күн бұрын

Wow that is rough. It's going to be a rusty mess inside. How can people let these things get so bad?

@BrokeMX 28 күн бұрын

Life happens sometimes…

@diontecottman4092 28 күн бұрын

I just got a 96 125 yesterday for free but its missing the jug

@BrokeMX 28 күн бұрын

Link listed in your other comment

@michaelroberts6299 29 күн бұрын

vagina i think ?

@Gordupnorth2 Ай бұрын

I just rebuilt one of these, looked about the same as yours when I got it. Been a process but she’s almost done.

@BrokeMX Ай бұрын

That’s awesome, I would love to see it. If you get a chance send me some photos [email protected]

@corvette_jake7225 Ай бұрын

Been working on a year 2000 kx250 that picked up for $900. Wasn't prepared for how bad everything was. The last person to rebuild it didn't even use gaskets, they used bathroom caulking hahaha

@BrokeMX Ай бұрын

We should have “ for the love of god, please don’t do this” videos lol

@corvette_jake7225 Ай бұрын

@BrokeMX I agree haha

@samwittstruck.6685 Ай бұрын

Did not tighten cylinder base nuts.

@BrokeMX Ай бұрын

It’s a mock up, cases are empty. Why would that pipe be special for this build? It may not be obvious unless you have tried to find this item for an early 90’s KX before. It’s made of “Unobtainium”. Meaning no one can find them or they are extremely rare

@Bobcat325 Ай бұрын

Exhaust pipe. 👁👁

@BrokeMX Ай бұрын

Yes but why would it be special

@paulwyatt1666 Ай бұрын

This guy should have more subscribers. You can tell he knows he’s way around a dirtbike. Love the pov camera shot. Looking forward to seeing more on this bike

@BrokeMX Ай бұрын

Thank you Paul

@BrokeMX Ай бұрын

Paul, you can also find us on Facebook at BrokeMX, or BrokeMX.com. Email [email protected] Help spread the word.

@rockman49er 17 күн бұрын

Definitely a good point of view but it does sound like he scuba diving lol 😆 same thing happens on my videos

@robertbrissie8645 Ай бұрын

Do you offer vapor blasting services?

@BrokeMX Ай бұрын

Yes sir I do. Thank you for asking, you can reach me at [email protected]

@robertbrissie8645 21 күн бұрын

@@BrokeMX Where are you located?

@BrokeMX 14 күн бұрын

@@robertbrissie8645 Winfield Wv

@jesuswarrior6468 Ай бұрын

These are the best builds.... Takes balls to restore the rusty bikes people don't want. I'm doing a 89 yz250 engine looks same as yours. Soak it up WD-40 and trans fluid and diesel mix. God bless mate from Australia 🦘🦘

@BrokeMX Ай бұрын

Thank you sir, I have not tried that mix yet

@chrismansker8870 Ай бұрын

i have restored much worse. at least its a 250

@BrokeMX Ай бұрын

I know it could be worse, there are some good surprises coming, a few anyway, and thank you

@kindnuguz Ай бұрын

for $500 though not bad honestly, I would check the vin as 1991 I didn't think the rear end lifted up like that? Thought it was solid frame up until mid 90's? Cleaning it up and parting it out would yield more than $500 so I think it was worth 500 imo (I think I have 500 cash sitting in my wallet I never use lol)

@BrokeMX Ай бұрын

Definitely a 91 I did check and matched the engine # they had sub after 89 I think, and definitely worth the 500. In the end it will be sweet and a good way to show how to come up with unobtainium parts

@JERT103 Ай бұрын

Thanks for posting, John! We had a blast down there.

@BrokeMX Ай бұрын

My pleasure

@JERT103 Ай бұрын

Wow, that engine looks pretty rough….Can’t wait to see this one come back to life! This should be a fun project to watch!

@BrokeMX Ай бұрын

Thanks man, I might have a good surprise in store on this one, we’ll see

@franksalas3142 Ай бұрын

Nice work

@BrokeMX Ай бұрын

Thank you

@TheStp77 Ай бұрын

When i saw the bike my first thought was scrap that, then you mentioned the nostalgia part, lets get it done, i rebuilt a 94 from top to bottom. Can’t wait to see what route you take on certain thing🤘

@BrokeMX Ай бұрын

It should probably be scrap, but let’s save something nobody wants and give it a new life

@mikeandrews1899 Ай бұрын

Worse than you can imagine 🤷‍♂️

@BrokeMX Ай бұрын

I think the handle bars might be the only thing not replaced or rebuilt as long as you don’t count the clutch, brake or kill switch and bar pad lol

@rezkidgamingyt4725 Ай бұрын

It will definitely be needing a complete teardown rebuild the shocks probably even the rims. They might not be bad though that engines need a lot of work though all new bearings, including the crank everything is there though and really that’s what matters is if mostly everything is there and that what really matters is the sentimental value, brother

@BrokeMX Ай бұрын

Agreed, thank you

@markilleen4027 Ай бұрын

$500 and a second engine it's not a price for how old the bike is it still has paint were its usually rubbed off original bolts aren't rusty

@BrokeMX Ай бұрын

It seems like the original owner took pretty good care of it and the guy I got it from bought it as a project, what happened between is a mystery.

@markilleen4027 Ай бұрын

@@BrokeMX honestly bro i think you got a good deal, im going off to pick up spear engine parts for my 06 tm300 for the 500

@pierrebikelifetv9832 Ай бұрын

Nice work bro

@BrokeMX Ай бұрын

Thank you, more to come with the unobtainium 91 kx

@ChristianSokol. Ай бұрын

Sounds so good! Great job!!

@BrokeMX Ай бұрын

It’s running a little lean, getting it dialed in now. Hope to get it to a track soon and see what it can do.., Thank you

@JERT103 Ай бұрын

Man that thing is a blast. Can’t wait to try it out on a track or some trails!

@BrokeMX Ай бұрын

Same here, need a track day

@ChristianSokol. Ай бұрын

Congrats! I KNEW i should have entered. Next time.

@christhornton3814 Ай бұрын

If it’s worth doing once it’s worth doing twice 😁

@BrokeMX Ай бұрын

I hate doing things twice

@BubblegumAndDucktape Ай бұрын

gasket first always bud

@BrokeMX Ай бұрын

Always

Ең жақсы KZbin

Пікірлер