Yall complain too much these shims work perfectly fine they don't affect the car nor battery whatsoever

Thank you so much, though of the worst at first on how much money it was gonna cost but thanks to you saved me alot!

Idk if I missed it but I didn’t see where you mentioned which direction the new bearing goes in. I installed my bearing only to find my ABS light was on because the bearing is backwards. One side is magnetized 🤦🏻‍♂️

WRONG!! He hand tightened the axel nut. You HAVE to torque it with a torque wrench to spec, mine is 174 ft pounds, its going to be loose and your wheel could fall off

thank you! Was trying to help a friend and did not see the upper two 10mm bolts

I just had the same issue with my 2002 CRV. I had double trouble as the brake lights were on for a extended period of time so that the left and right side bulbs burned out and the high mounted center light stayed on. Found a piece of the old stopper pad on the floorboard as you did. Once I watched this video, the new stopper pad went right into place and all seems right with the world now 🙂

Smooth job

What was your total parts cost thx

I love this. THIS guy has the proper tools to do the stuff but when it comes to pouring brake fluid... He uses no FUNNEL😅

This guy fills his oil back up through the sump drain 😂

Great video. Thank you. Aloha

This video helped me out tremendously. I was able to get the job done yesterday and still have time to cook dinner. Thanks for all the tips.

I wacked it at least 100 time 🤣

Title should be "The wong way to charge your brake fluid" 😂😂😂

thanks.... extremely helpful

Terimakasih sangat detail penjelasannya, good job

Thank u Sir! I'm 54 year old woman. I'm having to utube everything and working on my own cars now. VERY DETAILED FOR ME 😊

That’s not a stuck rotor

Thanks Roy - I just subscribed.

Thanks bro. 👊

Such a great detailed video, well done

Wassap braddah

Great video, thank you for uploading! Ill be referring to this when i replace mine in a few days.

My passenger door is locked and shut, The key will not turn the lock to unlock door. the pull up luck inside will not pull up to unlock door. The door handle on the inside will not work because the lock is engaged, How can I get the panel off the access the door luck and see why it is stuck locked? Mechanic want $600 just to remove the seat and door panel to get to lock. Can the door panel come off with the door shut?

toyota corolla Cover Sub-Assy, Instrument Panel Under, NO.2 installation?

Not rerun hose but pressure going to pinion

❤thank you

Thank you for the great video. I had no idea why my transmission suddenly disconnected. My first thought was I was going to have a major expense to get my truck repaired. I found this video right away and ordered the part. The repair took very little time. Thank you!

I hope your cat is ok

Put a screw in the gap between the bolt and terminal

Nothing beats oem? An electrical connection is an electrical connection brother

Thank you !! Great video

Just follow the service instructions or you will spend your time figuring out

Where did you get the tool for the inner rod?

You've saved a lot of money. Thanks,

I saw your other video for a 2007 . I was wondering since its stuck in Drive and wont LOCK into place for park , neutral or any other gears , whats the proper procedure and once you mentioned to put the shift into PARK with the Emergency brake on, turn the car to the ON , step on the brakes then put in NEUTRAL, let go of the Brake pedal then turn the car to OFF I knew this guy is the truth! Thank you

Its 2.23 for me here in san antonio texas at a toyota dealer . shipping is like 14 bucks but I can drive my car. This video is extremely helpful!!

Check the oil level with the dipstick before you start the car to make sure you have the correct level. Also look underneath to make sure no new oil is leaking. When tightening the oil filter, tighten it about two inches after it stops. If you over tighten it you risk the rubber gasket sticking and peeling to the car the next time you go to remove it. You should be able to remove your oil filter without any tools.

Mahalo mai kahiko Haole keiki Kane!👨🏻‍🚒🤠😇🙏🏻

Great video, about to tackle this project because Toyota decided to use some junk Water Pump in these engines. Thanks for letting us know the bolt for the idler pulley is reverse thread! Saved me a potential headache!

Seems kinda backwards huh?

@RaysGarage808 do you have to compress the spring at any point to prevent it shooting off? Also did you put the punch into the little hole to make it align with the opening or just punch the opening space?

Thanks for the straightforward instructions! You're a good teacher and the quality of the vid was great, especially for a car port! I assume, you're in Oahu. You ain't kidding about the tight clearance to remove and reinstall the belt! It's the most time consuming part of this job, in my 15 years of working on my own a Camry. The last time I had to do it was to replace a water pump. Thanks again and be safe!

Roy you are an angel. My shifter popped off and I had no idea what was going on. All the shops told me it was gonna be a huge job but it wasn't. You have no idea how thankful I am.

Also it's time for timing belt

Thank you 🙏

no torque wrench, no specs, just brrt that thing right on

Thank you so much! I had this exact same problem! I saw a piece I never saw before on the floor of my front seat and this video helped me fix the issue on my own!

Thank you for this video. Just what I needed to save a million dollars

Man thanks so much. Makes going into someone else's vehicle easier. Trying to help a friend and now I'm going to show up like a pro lol