I went to pep boys and argued with a guy and told me it was not there I don't have a cabin filter in my 2015 nissan rogue because he couldn't find it in the box compartment! I showed him this.video he was mad called me.a.lier and I wasn't supposed to be googleing things! I WALKED AWAY😅
@JJCentral-DIY5 минут бұрын
@@angeleyes777100 That is the best comment I got this month. 😄Wonderful to see my videos helping people gain knowledge and save money. Thank you.
@VoiceAlertTexasКүн бұрын
What about the pully?
@JJCentral-DIYКүн бұрын
Most of the aftermarket pumps come with pully now. It's better that way so you don't have to worry about pully bearings.
@katlum78362 күн бұрын
Canada Dealer charged 600 bucks
@Carlosmartinhox3 күн бұрын
🤗Brother, congratulations on all this work, for being true, showing reality with some of the Tesla vehicles... Most KZbinrs should be ashamed of the public service they don't offer... Either they don't have the courage to transmit the truth or they are paid to say what some want...The Tesla brand is evolving, it is a pioneer in some aspects, but it continues to be a baby as a vehicle manufacturer...🫡
@JJCentral-DIY3 күн бұрын
@@Carlosmartinhox Thank you for the comments. I was one of the early model 3 owners and the Tesla fan boys would gang up and shut up anyone who criticize the car, even if it is constructive. I don't blame them because they had to constantly defend not just Tesla but EVs in general to confidently incorrect people. Now both the Tesla cars and the fan club have matured to be better. Check out my part 2 video as well if you haven't already. Once all the rattles were fixed, it became a dream to drive. I have a Y, but I still miss the 3.
@nilasvilla7 күн бұрын
I like that clock :)
@Keith3putt7 күн бұрын
I have had this issue 5x+ on my 2022 Y-LR and they replace parts, seat and last time had my car for 5 days at the SC. Just came back, after 6 months, and I made another SC appointment 6 weeks out. Issue comes and goes. It can give me multiple notifications for the fault on the same day OR it can go days without a notification. Only issue I have really had with the car in 2.5 yrs.
@tenzinjimenez56878 күн бұрын
god bless you sir
@the2pachistorian5918 күн бұрын
Great video. The best air filter is a wix
@adamelmisurati29518 күн бұрын
Thank you so much, very beneficial video. I have a question, is the pulley of the steering pump removable? Any idea how to remove and replace the pulley?
@moncorp19 күн бұрын
Dont waste your time with hot glue. It won't last 5 minutes.
@mitchallen581910 күн бұрын
Could this cause intermittent starting issues? I have a 2019. The key is inside the fob, which is turn to start (not push).
@JJCentral-DIY10 күн бұрын
@@mitchallen5819 yes, if your car requires the brake pressed to start then the switch will cause no start.
@mitchallen58199 күн бұрын
@@JJCentral-DIY it doesn't always.
@dustinstone469510 күн бұрын
What is that part he held up before connecting new part
@Psycho926310 күн бұрын
What's all this talk about voltage when it's amperage and joules that kill?
@timwarneka568111 күн бұрын
You are a good and thorough teacher. Thanks for this video!
@amarley10011 күн бұрын
Who is the genius that made a filter box too small for the filter?
@be28ans7 күн бұрын
Right!!
@sofianlim455811 күн бұрын
Awesome. Thank you sir
@Weebers11 күн бұрын
Super easy and helpful - saved me from having to do a $250 "15k service" nonsense at the dealer - when they already review everything at my oil changes, minus replacing this air filter - which i can now do by myself!
@nebula_a_a12 күн бұрын
You could just use a drywall anchor of some sort.
@MyTonychen12 күн бұрын
This Honda is not close to a 2015 or 2020 Fit..Put up the correct year.....
@valerieunderhill618813 күн бұрын
Thank you
@albertovelasquez308313 күн бұрын
I don’t understand, I’ve tried everything and mine doesn’t come off. And I’ve already seen so many videos just like yours that do it the same way. 😭😭😭 what can I do??
@JJCentral-DIY13 күн бұрын
@@albertovelasquez3083 you peel the carpet enough and use pliers to gently squeeze and tap the little nubs from the inside of the trunk and try again.
@reycabrera99613 күн бұрын
Thanks apreciated
@marchennessey531413 күн бұрын
Doesn't seem like you hit anything behind that sheetrock
@JJCentral-DIY13 күн бұрын
@@marchennessey5314 Good enough for a feather light clock with no glass. Lol.
@marchennessey531413 күн бұрын
@@JJCentral-DIY lol
@Tigerwest197914 күн бұрын
Where can I get these parts?
@JJCentral-DIY14 күн бұрын
Just need a connector. Check the description of the video. Link is there.
@chefboyarrde15 күн бұрын
Pretty cool you can do this right on the ground with no lift required, sweet!
@natewarner16 күн бұрын
Good one! We've already got a metal detector so if we have to do something similar, I'll give it a shot with that one! (We got it because we're in Michigan and my spouse has a thing for rocks. Specifically, rocks with copper in them. Specifically, rocks from the Keweenaw Peninsula with native copper in them. :D ) Welcome to come up to Michigan some summer day (so y'all don't freeze coming up from TX); make sure to check out the UP and bring your metal detector if you're into copper/rock hunting!
@JJCentral-DIY16 күн бұрын
@@natewarner Thanks for the recommendation. I just looked up the eagle harbor area and wow! How beautiful it is. Will put this on my bucket list and remember to include copper rock hunting.
@tweetyuno18 күн бұрын
Thank you very much for your valuable information. Blessings
@bassoneman18 күн бұрын
I Just replaced mine. Thanks for showing the 30% turn. I followed another guy on youtube and he said turn it prior to putting it in to line it up with a pair of pliers. Of course I did that.. Wrong... It wont install like that, the turning the 30% while you have it lined up enables it to slide in then turning it locks it.. (Yes and Start the car and Push the pedal all the way down..) Also after wrestling with it for a 1/2hr trying to get it in, I decided to remove the wire connector. The switch popped right in turned it 30degrees then attached the wire connector.. Much easier... Took me 30 seconds..
@JJCentral-DIY18 күн бұрын
@@bassoneman Thanks for the comment. It is one of those simple tasks yet unnecessarily troublesome. Glad you accomplished it by diy. Kudos! 👏
@deborahlambert460118 күн бұрын
What’s the white cap lower left area? Cleaning mine now! What is it?
@JJCentral-DIY18 күн бұрын
@@deborahlambert4601 it's a float that lets the water know when to stop as soon as the float upper level is reached. Kind of like a sump pump water inlet float.
@derrickw521420 күн бұрын
Thank you for this
@Rob_43020 күн бұрын
This is the best video for changing the filter. I’m 77 and don’t do anything on cars anymore, but put gas in them……lol. The dealer said next oil change to change this, but I ordered one from Amazon. I’ll try the cabin filter too……lol. Thanks
@JJCentral-DIY20 күн бұрын
@@Rob_430 That's awesome to hear your diy efforts. Let me know how the cabin air filter goes.
@karlmoore678421 күн бұрын
Thank you
@starscream281221 күн бұрын
My freezer is very cold, but the refrigerator part is very warm. I found water it pulled inside the bottom. This video and the comments gave me the idea of defrosting the whole thing, so that’s what I’m gonna do. Fingers crossed it works
@mikebianco785424 күн бұрын
Dealer did mine they charged me over 300 bucks
@JJCentral-DIY24 күн бұрын
@@mikebianco7854 Actually that's not bad. I hear people getting charged upto 800 for the same service.
@dougferrell706624 күн бұрын
Thanks for this video! You solved my "dead" liftgate. Your #2 "transport fuse" reset solve my problem. !!!
@tonycervantes481624 күн бұрын
A question in 2012 also that is the location of the mass air flow sensor. And when you cleaned the sensor did you erase the code before or after cleaning the sensor sir
@marquesmartinez73025 күн бұрын
Looks easy! Thanks for the video
@spongeguy1234525 күн бұрын
What size drill bit was yours?
@JJCentral-DIY25 күн бұрын
@@spongeguy12345 Believe it's a 1/4 for pilot and progressively upto 1/2
@joey856725 күн бұрын
Cheap frame made wallerred out screw holes. 😂. Im sorry but I'm duel citizenship from Germany, America appliances are not my choice anymore. I'd rather put supply storage where refrigerator goes and purchase a commercial refrigerator and commercial freezer. Maybe Viking makes something adequate for home use today. Ill have to look up
@RicardoLandinginJr26 күн бұрын
What screw did u use for that red siding ?
@JJCentral-DIY26 күн бұрын
@@RicardoLandinginJr Mine is aluminum siding, so I used a metal to wood screw that is exterior rated and a dab of caulk. If you have vinyl siding you pre drill and use any exterior screw but don't squeeze the siding too much.
@natewarner26 күн бұрын
Good one to teach folks how to do simple tasks themselves! I can also imagine in 10 years, folks may still refer back to your tutorial as the vehicles move to 2nd or 3rd lives. Hear hear to algorithm support via comment? ;)
@JJCentral-DIY26 күн бұрын
@@natewarner Thanks Nate, you are absolutely right. Lots of my videos are still consistently useful for users even after 6,7,8 years. Support from users like yours and those positive comments keeps me going. No complaints here.
@Lordvoldemore27 күн бұрын
How long did it take at the service center? I live 2 hours away so I need to plan a day to go.
@JJCentral-DIY27 күн бұрын
@@Lordvoldemore it's just 1 hr work, but depends on where you are in the line, they can take all day
@brightandsunny27 күн бұрын
YOU DID IT AGAIN!!!!!! Saved me a bundle of cash, 😊THANK YOU THANK YOU!!!!!!!! So Appreciative for your videos!
@JJCentral-DIY27 күн бұрын
@@brightandsunny thank you for the compliment. Hope you subscribed, you may save a lot more with my around the house diy fix videos. 😄
@brightandsunny27 күн бұрын
Perfect instructions. I did it!!! Many thanks, you saved me $50
@jasette7427 күн бұрын
Thanks for the info and tips! How long did the service take when you brought it into Tesla for repair?
@JJCentral-DIY27 күн бұрын
@@jasette74 dropped it off in the morning and picked it up evening. It should've only taken 1hr of actual work.
@YesWeAreFour27 күн бұрын
Thank you so much
@ExitiumFelicitas28 күн бұрын
Wow man u are doing great i like your video. Its very helpful
@bludika28 күн бұрын
Samsung is 100x worse lol
@joey856725 күн бұрын
Whirlpool still assembled a fridge plant in states. There motto is, if you want extras don't buy whirlpool as they only focus on efficiency and the fridge itself
@bernardb623628 күн бұрын
Take a look around your seal and door Ether dirty or mold