I will never own another Kioti. I sold my Kubota and bought a new 2022 DK6010se cab and had hydraulic pump cavitation issues. They were not able to fix it. They swapped my 2022 with a 2024 DK6020SE after 2 years of me being upset with the problem and this new one has the same problem, just not as bad. The factory is aware of this issue that is in about 10% of these tractors. I have been working directly with the factory now giving them information on conditions when the problem happens. They installed an experimental electric pump on the suction side of the main pump and it has helped but didn't fix it. Also the wiring is exposed under the tractor and I have broken the wires twice while flail mowing. The factory is now installing a larger version of the system they put on mine but won't install it on mine because mine is better and they have so many to install and parts are limited. There are many other cheap components on the Kioti's. The hydraulics for both the 3 point and the loader are terribly jumpy and not refined. This is a case of you get what you pay for and as soon as this thing is fixed I am selling it and buying another Kubota as I have never had ANY problems with the Kubota I owned for years before the Kioti. If you are putting 50 hours a year on a tractor maybe you can live with the cheap Kioti, but I have put 310 hours on my 2024 Kioti in 7 months and I can't live with it anymore. This is my experience with Kioti, I'm sure many people love theirs, but after the last almost 3 years of being in and out of the service shop and the frustration of other cheap components that just don't work well ( like the 3 pt position hard stop screw being plastic and no matter how tight you try to make it, it will move over time even when being careful not to put pressure on that hard stop) Never again

I have a 4530 which is slightly smaller than the 60 series. I have not had any problems with it.

Great video, many thanks. I believe it is a great compromise between full manual & hydro. I have a hydro now, but my next tractor will be a shuttle shift. Cheers from Australia.

Great video!

Love my NS ❤

I have to say that your videos make a lot of solid rational points to support your views on the machines, which makes them much more valuable than the typical tractor opinion videos.

well done

It cuts well. How many HP does your tractor put out at the PTO?

Did you buy this Kioti from Good Works?

Hello, Are you interested in testing our products? We would like to invite you to test the Front Windshield for your Polaris General XP4( if your car year is 2016-2024

Man, that just does not seem very effective

Usually jumpy loader is low hydraulic fluid. At least my experience with hydraulic loaders, or a stuck valve not letting fluid pass

Hey Luke I have a Kioti 2018 NX6010 HSTC and love it . I just bought a stump bucket which was delivered today , can't wait to use it . I think Kioti Tractors are built way better than John Deere and Kubota for the money .

Nice video! I wish more people would show this tractor actually working.

Good video!

When you get a windshield get the ones with safety glass. They don't scratch like the plexi glass.

Kubota loader capacity is so disappointing. Love your new tractor!

Did the tool box come with it, just did buy there exact same machine and it did not?

What is the max rpm you 6075 will run at? I just bought one and it seems slow

Ever think about buying a flail mower?

That Polaris 4-Wheel Drive seems to be working great. Seemed to engage right away 👍

I've owned a cabbed 3550 PST for 8 years. Great tractor, very reliable. Does everything I've ever asked it to and I do pretty much the same stuff you do. Never had any issues with it. I have the R4 tires for the same reason you do. That said, I'm currently in the process of trading my 3550 in on a 2024 PST 6075 with a cab. I'm looking forward to having the level of reliability with my new tractor that I've had for the past 8 years with my 3550. I will be getting my new one with the R4 tires and the ridiculously expensive jump seat. I'm very happy with the brand overall. IMHO, you get a lot more tractor for the money.

Have the back hoe attachment I only have 90 hours on it. The machine is 2 years old, digging a hole all dirt and was retracting the arm and the main piston bent. This is the first piston closes to the cab. I have no idea how or why. And being it’s only 2 years old of course it’s not covered by warranty. The new piston is 1350.00 and the arm is stuck in the hole. I spoke to the dealer, my problem is I don’t know what bent the piston, and if I put the new one on I’m not sure it won’t bend again! The dealer said if I bring it to them they can do a fluid test, I told them how do I do that? It’s stuck in the hole. I took the piston out and have to order a new one. I never seen a piston bend right in the middle. Not a mark on it. Just bent.

Great video

It doesn't look right cutting that wood. I have a ms400 with a 20 inch bar and it's so fluid.

Taking possession any day now of the exactly same machine the dealer said I have my choice of tire types, what and why did you decide on yours?

Perfect! THANK YOU

No more mahindra?

Been looking at JD 5065e....Kubota M6060 and seen this video. Went to the dealer and talked about a Ns6010 with cab. Like always....not one at dealer but he is trying to locate one.

Nice job, this is exactly what I was looking for ... I assumed I'd be slapping the clutch all day in a geared tractor so I planned to stay with hydros. Now it can be an informed decision.

do you prefir the mahindra than the John Deer cause I know you said the John Deer can be a bit tippy sometimes you said in another video

Hydraulics routing on the Kioti loader is MUCH nicer than on the Kubota. No loops hanging out to snag on stuff.

Cab light? Got wiper wiring has a interior light wire what light?

That cat is HHUUGGERE

Trying to understand why you would be smelling exhaust when you have the enclosed cab… can you please explain because I’m new and looking into cab vs no cab. Thanks! Also about the AC without tinted windows it will have trouble keeping up in summer. Think you have same issue as with a car and lots of windows. Greenhouse effect

I’m impressed and sold. Thank you for sharing.

Thanks. I have been on the fence about Kioti. Have dealer 2hrs away.

Does the loader bucket have a replaceable cutting edge

that hst whine is just tooo much

Tighten the chain that will help it not jam so much and cut better. Very loose in video can be seen at around 8 minute mark or bit after. Cheers for review though.

I have a Massey Ferguson 391 (about 45hp) with a 7’ tiller and I have no problem with power! Don’t know what issue that you are having!

ive got a dk45s with 7' tiller in clay and it works great in med range. sometimes there's a super hard sopt and it bogs down a bit. no issue

Amzing

Looks good! I am always impressed with the NS6010, its a beast and hasnt let me down with any task ive asked of it.

I've been looking at this size tractor, do you think the 33hp version is a little overkill for the chassis size? Wondering if the 22hp version would be better for it because it seems like Kubota is not putting more hp than some of the frames need and you will never use all the hp due to lack of weight of the tractor.

Hey, should see if you can do a review on TYM 1104 tractors.

Nice video. Informative

a 10 pound weight for a 1" bench press bar fits perfectly on the shaft and really helps it dig in.

Hello, Are you interested in testing our products? We would like to invite you to test the Rear Window Net Fit for your 2020 Honda Pioneer 500

Went standard because of noise as well in my lx3310 I didn't want hydrostatic at all after showed it on my channel