tak for at dele!

Fungerede det som du forventede og hvor længe holdt det?

Tái nạp (refill)CO2 thực phẩm vào bình SodaStream.LH tel & zalo :0931.851.892

Is it enough to lay a non-siphon tube donor tank on its side to refill a Sodastream cartridge, or should the donor tank be fully inverted?

I refill my Sodastream CO2 cylinders with clean, food grade dry ice. Purge, measure it out, fill the canisters, reseal. I wouldn't use industrial C02 to fill - you can't guarantee the cleanliness of the filling source, nor of the tank, nor that there aren't impurities in the C02. And I fill all four of my cylinders for less than $5 per cylinder.

Eric mb Soda Stream don't sell the cylinders anymore for the 1960s Soda Stream so that's why this is being done.

Tak for et godt grin her fra Learnmarks kloakmesterhold 2016 :-D

The cost structure boils down to, about $5.00 each way to courier 6 pack of refilled cylinders, having machinery capable of auto-filling, capping and conveying cylinders during process (approximately 100k worth of machinery) , Paying staff to actually fill, box, and receive and dispatch refilled bottles . Each cylinder is prechecked for obvious damage, and briefly checked for leakage before packaging after filling. Then the seller adds their margin onto the process. The handling fees incurred is probably most of the cost of the refill, the CO2 in the quantitys bought would be in the cents per liter.

just go to the supermarket and buy dry ice, one pound will more than fill a 60L bottle since you only need 14.5 oz. its alot easier than guessing

Bio blokke bør installeres så rørene i blokken vender lodret. Ligges blokken ned mister blokken en stor del af sin styrke, og det overliggende jordtryk kan sammenklemme faskinen.

If this CO2 needs to be food grade.

nice tip but USE ONLY CO2 for FOOD using don`t USE technical CO2, can be contaminated by toxic substances

and the pressure in a CO2 cillinder is not 200 bar!! it's more like 40 - 50 bar

Hi everyone! Because I read a lot comments of people who worry about the quality of the co2 in industrial cilinders and cilinders for food. Myself, I work in a company where we fill CO2 and i analyse them as wel. for food co2 or gourmet as they say, the norm of h20 and 02 contamination is so high that it's always good!! the only difference in industrial and food CO2 is, that we have to analyse it as a proof of: this is ok! but the norm is always fine (sorry for my enlish :-p)

What is the adaptor number? loving this!

Have you modified the Soda stream valve at all to fill it and how do you know when it is full and not over pressures it , thanks:-)

My concern is if the CO2 gas for welding or industrial uses is the same grade as food grade CO2 for soft drinks...

I got the dry ice at Airgas, they didn't know about 'food grade' but all their customers use dry ice for fish storage and shipping. The vid is here on youtube - search for "Refilling sodastream Co2 tanks for $1." Please use gloves!

I live in Hawaii, and nobody will ship the cartridges here, and the stores (Walmart, etc) don't have them either. Something about the filled tanks shipping by air - not allowed. I refilled them by crushing dry ice, and stuffing it into the tank, (with the valve removed of course). Works great and costs about $1 per tank.

how do you know it has reached the optimum point to disconnect ?

Is this dangerous?

@videoben9 it's not a one way valve at all. doing it the way this guy did won't be as effective because he didn't use the bleed valve on the side, but it's definitely not a one way valve

you know what else is funny? when people get pissed off at facts they see in youtube comments and call the person who knows what their talking about an idiot

its wary dangeres

I love anal.

What's the point of this effin video? Zero info going on here!

So where is the order info and everything that you actually need? Lacking some vital info here bud.

Where do I buy the adaptor?

Not true. Yes, CO2 is CO2, like water is water. But you can have contaminated CO2 just like you can have contaminated water. Food safe CO2 is of course safe. Welding CO2 should also be safe (bad CO2 might affect the weld). There is no reason for paintball or fire extinguisher CO2 to be especially clean, so I certainly wouldnt just assume that it is.

sodas bad. You shouldnt drink soda cause sodas bad mmkay? You drink soda and youll just burp, and burpins baad. Extra gases in the body is bad

u know wats funny? this doesnt work bcuz it a one way valve. the only way you can refill the tank yourself is with dry ice or fucking up the piece that blocks refilling

there lying all c02 is the same.

When I heard about DIY refilling I decided I was def going to do this. I just can't find the tanks in my area! Also, how do you know the SS tank is filled? Do you just guess, and refill when it empties? Is there a way to measure? Also, my only concern is an explosion! Lol.

It is not full, aboutb out half full after the first fill. But i don't care, i just refill more often. But you can repeat it two or tree times, then it will be full (425g)

C02 welding... call it MIG welding :D i weld and its motha fuckin fun!

CO2 is CO2, there is no dirty CO2. It is only the tank that is different and need to be treated as food.

This can be dangerous if you dont use co2 gas for food usage... if you use industrial co2 gas its dirtyer and not so clean etc.

dear friend how ar you we ar trading company from yemen we have find the Gas Saving Product so please send us ur idea and all info with pic we hope to be ur agent here in Arabic market and i tray to send u email from ur web but no any one reply me im wait for ur news thanks regards hamood ahmed [email protected] 00967771776391

I live in Canada. I ordered one of these adapters from co2refill.eu. It arrived a week later and it works perfectly.

Sodastream valves are booby trapped so you will destroy it if you try to refill it...

This is not a easy or cheap adaptor to make because the security, the pressure in the donortank can be up to 200 bar.