Spray your motor head with crc soft seal. Great stuff
@nickharper64362 күн бұрын
Many thanks Phil I’ll give it a try 👍
@snoman19997 күн бұрын
New Subscriber 👍🏽
@nickharper64367 күн бұрын
Many thanks for subscribing 👍
@johnkershaw547513 күн бұрын
Worst video I’ve watched of how to fit a bike rack 🤷🏻♂️ thanks for showing us how to fit it 🤨
@nickharper643613 күн бұрын
Sorry it didn’t meet you expectations. I’ll try better next time ha ha
@chrsmortain48124 күн бұрын
What’s weight limit on bike rack
@nickharper643622 күн бұрын
I believe the max weight is 35kg
@chrsmortain48124 күн бұрын
Be so much better if there was another bar on left barn so weight is spread over 2 doors and bike weight spread even then once at location slide rack over to right door so doors can open
@nickharper643622 күн бұрын
Sounds a good idea. 👍
@chrsmortain48122 күн бұрын
@@nickharper6436 would double the weight limit to
@johncampbell4498Ай бұрын
Great video, very helpful. just a trivial ask, Q. which and how did you mount the camera for watching the spring movement while driving? - is it a gopro? which model? very clear to watch. - and what is your next upgrade? rear shocks or the Front end? -i guess that is a whole aother question - what about the front end?! - thanks for posting the great video.
@nickharper6436Ай бұрын
Hi John thanks for the comments. Is the little cube GoPro and I used a fly mount to mount it to the underneath. Regarding the front I’ve put Sumo spring assisters on. Eventually I’ll change the shocks but for now I’m satisfied with the ride!
@liverpool45879Ай бұрын
Do you need that bottle tho you can just use that adapter on a normal bottle ???
@nickharper6436Ай бұрын
Hi thanks for the comments. Yes you could use the adapter on a normal bottle of you wanted.
@aerialinsightsАй бұрын
There's something oddly satisfying about watching suspension in motion.
@nickharper6436Ай бұрын
Cool, glad you enjoyed the video !
@CsPri3stАй бұрын
make a net and cover the holes so it doesent go in to the pipes much easier to clean
@nickharper6436Ай бұрын
Thanks for the comments and yes a good idea which I’ve now done 👍
@ScottGoody71Ай бұрын
Hi nick , looks like a good upgrade , I see it was a few years ago you fitted these , are you still running with both sumo springs , I’m thinking of doing this to my Hymer ( Ducato also ) Tha so for another reallly good video⭐️⭐️⭐️⭐️⭐️
@nickharper6436Ай бұрын
Hi Scott yes I’m still on the SUMO springs and they are working great. I’ve also added double leave springs and the combination works great. I’ve added the video here: kzbin.info/www/bejne/fJ6WkpmhrNqMpqMsi=rB_DR4DhJlLoF5Sg
@timnorton6522Ай бұрын
Thanks for a very helpful video. I have followed it to install the same camera with the hardwiring kit. The only problem I have is that I can’t connect to the camera once I park and walk away from our motorhome. It’s fine when I’m in it but not when I leave it, for instance when I’m at home. Should I be able to connect and view the camera from any connected device or only when I’m in the vehicle? I thought I would be able to this but perhaps I’m wrong. It only connects when it’s listed on my phones available Wi-Fi connections and the halo one disappears when I walk away from the camera. Any help much appreciated, cheers.
@nickharper6436Ай бұрын
Hi Tim, thanks for watching the video and glad you found it useful. Unfortunately it will only connect to your phone when you are in range (Wi-Fi) of the dash cam. You can get ones that do what you want but are of course a lot more expensive. Blackview is one such brand I believe.
@t5jayson2 ай бұрын
So over 2 years on which ones sre you still using and are they any good?
@nickharper64362 ай бұрын
Hi thanks for the comments. So I’ve used most things apart from the LED light and the fire extinguisher thankfully. The Ridge Monkey is really good and gets used often.
@andrewadlam1582 ай бұрын
Great advice, i would suggest using ACF50 or muckoff HbC1 as they are designed to protect engines from corrosion
@nickharper64362 ай бұрын
Thanks for the comments and good advice 👍
@oldmanriver30663 ай бұрын
Useful reminder, thanks. It can be awkward to remove debris from these pipes but you can get a drain unblocked which connects to a Karcher (it has three back jets to push through to the blockage and a forward jet to break up the blockage.) It has never failed. I use pot scrubber as a filter. Let’s water through but catches bigger debris.
@nickharper64363 ай бұрын
Thanks for the useful info. The pot scrubber idea sounds good 👌
@HannuPulkkinen493 ай бұрын
Thank you! You didn't show how to make the most difficult purchase. How to attach the bars to the car. The final installation is easy.
@nickharper64363 ай бұрын
Yes sorry I didn’t film that part and realised after that I hadn’t
@HannuPulkkinen493 ай бұрын
@@nickharper6436 Thanks anyway. Your video was helpful. I found a German video where the installation of the strips was explained. I know English better. Happy summer and greetings from Finland.
@caseycolopy90913 ай бұрын
Totally skipped the glue step wow
@nickharper64363 ай бұрын
Yes I could have kicked myself for missing that bit and realised once Id stick it down but no going back at that point 🙈
@andylobley54103 ай бұрын
Do you know where the middle drain pipe runs out. Mine is blocked and I can't clear it. I've seen a spare on ebay and the problem is the stupid design at the end of the pipe it's not open it's shaped and has a really narrow flat exit, which is clearly blocked on mine. But I can't find a workshop drawing that shows me where it comes out. I'm assuming it somewhere around the driver's side wheel arch.
@nickharper64363 ай бұрын
Hi Andy it’s in the drivers side wheel arch behind the wheel towards the top of that makes sense. I squeezed mine by reaching down inside the engine bay. Squash the pipe vigorously as I did mine and it eventually cleared. Hope this helps.
@andylobley54103 ай бұрын
@@nickharper6436 that’s great, thanks Nick.
@briangoodland91063 ай бұрын
Thank you 👍
@nickharper64363 ай бұрын
No worries and glad you found it useful.
@briangoodland91063 ай бұрын
Hi nick what wind Defactors have you got on your motorhome pls They look wider than the ones I've seen
@nickharper64363 ай бұрын
Hi they are the HEKO ones which I got of eBay
@oh2mp4 ай бұрын
Greetings from Finland and thanks for this video. I just changed my motorhome to a Sunlight T67 which is built on a Ducato about the same age. I got some tips on removing the covers etc. from you.
@nickharper64364 ай бұрын
Many thanks for your comments and glad you found the video useful 👍
@bennywootton11194 ай бұрын
Hi nick, have you changed anything at the front?
@nickharper64363 ай бұрын
Hi I fitted Sumo springs to the front as well. Link here to the video: kzbin.info/www/bejne/epTbY4aCn6aob8Usi=CoBZsLOCRPBETxIu
@netposerx4 ай бұрын
I thought those springs are not supposed to be touching unless you are driving over a bump.
@nickharper64364 ай бұрын
Ideally that would be the case. I’ve added double leaf springs so they are just clear now. Thanks for your comments.
@ronecc24 ай бұрын
Where did you buy Sumo Springs. Their website says no dealers in Europe. Do they have to be imported from the US?
@nickharper64364 ай бұрын
Hi thanks for watching the video. I got mine off Amazon and they did come from the US. Rhodes vans also used to sell them but not sure if they still do.
@edwarddoyle92314 ай бұрын
Hi good video, to stop any tree debris etc, blocking the drain pipes try some pound shop stainless steel pot scrubbers at the water entry point to work as filters. Ed,
@nickharper64364 ай бұрын
Fantastic idea, thanks Edward
@garrymavin_imotek5 ай бұрын
Thanks for the video. I’ve got a 2022 Ducato and had all of the covers and pipes off for cleaning today. There was a lot of debris in the drain channels and tubes and some corrosion on the injectors already. I’ve put a bead of clear silicone between the scuttle panel and windscreen as this looked like a poor fit. The top of the engine under the plastic cover is a perfect trap for water. I’ve removed any surface rust and treated it temporarily with some WD-40 for now but I think AC-50 is a much better option over winter. I think the camper ideally needs to be under some shelter next winter. Not sure if an engine cover would help long term or just trap moisture in.
@nickharper64364 ай бұрын
Thanks for the comments Gary. I think regular use is the best preventative measure but as you say undercover otherwise. Some of the external screens cover the drain holes and would prevent water getting in the engine bay possibly.
@bluerallyes25 ай бұрын
If you’ve not spotted them, there’s two smaller drain holes in addition to the main three. They’re behind the bigger side drains. Keep these cleared too
@nickharper64365 ай бұрын
Thanks I hadn’t noticed these. I’ll have a look 👀
@martinmcdonagh50615 ай бұрын
We’re so I get?
@martinmcdonagh50615 ай бұрын
We’re do I get them gas bottles?
@nickharper64365 ай бұрын
Try LPG Shop. Here is a link lpgshop.co.uk/safefill-gas-bottle-large-10kg-lpg-refillable/?sku=400290&gad_source=1&gclid=CjwKCAjw_e2wBhAEEiwAyFFFo8mKWnCLZgCEaYk-6TJXE9V5E83nUVlHWjKbVFdAqW45j4LtOimXoxoCEGwQAvD_BwE
@JanineJanssen-ds5qe5 ай бұрын
Hai Nick, where did you buy the cable that ensures that the door cannot open further than 90 degrees?
@nickharper64365 ай бұрын
Hi Janine, this was fitted to the vehicle from new so it was a fitment by Adria. The Ducato van from new does have a system though. Hope this helps
@liamkelly76685 ай бұрын
Hey Nick, how tall are you? I'm looking at one of these but it seemed a struggle for yourself and I'm only 5'6!
@pauldavis45834 ай бұрын
Same here 5’7 and i want to be able to put a bike cover on. I was wondering about the disadvantages of using the lowest position for the platform on the Thule - I also have an Adria on a Ducato. I note that all of the reviews seem to have gone for the middle position.
@nickharper64364 ай бұрын
I’m 5’10 but you could buy the carriers at the lower level. I sometimes use a small folding step and that helps especially when putting a cover on.
@nickharper64364 ай бұрын
I would think you could use the lower position without any problem. I use a folding plastic step now which makes it easier. Thanks for the comments.
@markhoughton52946 ай бұрын
Have had some great sessions here and round at Hunstanton. Not been since mid summers day 2020 as moved another 2 hours further away than the already 3 hour drive I had, but now only 55 mins from the west coast. Must get back there one day.
@nickharper64366 ай бұрын
Thanks for the comments Mark. Yes there are some nice spots around here but sounds like your ok only 55 mins away from the water 👍
@pkwentus6 ай бұрын
Nick, great video, we decided to buy this rack for our Promaster in the states. Wondering what rear door windows you have fitted to your van?
@nickharper64363 ай бұрын
Thanks for the comments. The windows were already fitted to the van and I believe they are made by dometic but not 100% sure.
@TheVideoviwer6 ай бұрын
Hi Nick, Thanks for your very informative video. I have a 2021 Pilote with a Ducato as well and I have the exact same problem. The only way I could unblock it was to fill it with water and squeeze the pipe as you did very low down and hey-presto water gushed out. I've ran a few gallons through it and all is now ok. I've sealed up that useless pipe joint as well and make up some mesh covers for the inlets.
@nickharper64366 ай бұрын
Thanks for the comments. Yes you have to keep an eye on it but especially if parking the MH up over winter for example. Glad you found it useful
@chuongtran75646 ай бұрын
can I have the model number of front and rear sumo springs? my ducato is 2021
@nickharper64366 ай бұрын
Hi these are the ones I purchased from Amazon the fronts are: SuperSprings CSS-1195 | Coil SumoSprings for various applications | 1.95 inch inner wall height, Black And the rear are Supersprings SSR-313-54 SumoSprings
@wynparry9716 ай бұрын
Thank you for the video very helpful.Can you tell me if there are any airbag issues when taking the seats off ?
@nickharper64366 ай бұрын
Thanks for the comments. Not for me personally as I left every thing connected and just laid the seat to the rest giving access to the batteries rather than taking to seat completely out of the van.
@kamrai59626 ай бұрын
Hi Nick when fitting your new alloy wheels did you adjust your original suspension set up please thank you in advance
@nickharper64366 ай бұрын
Hi thanks for the comments. Not initially but later fitted SUMO springs front and rear and HD leaf springs on the rear. I’ve lined the videos below which may be of interest to you. kzbin.info/www/bejne/eYiZpaaJqctrec0si=258HJbMJ3iriZif2 kzbin.info/www/bejne/epTbY4aCn6aob8Usi=2C6D4VF7T3rODpht kzbin.info/www/bejne/fJ6WkpmhrNqMpqMsi=faWOLZwT9Jh1zWm1
@daleaxe10306 ай бұрын
Thanks 🎉
@designedlearnin6 ай бұрын
I really wanted to see the door brackets fitted....in particular what glue do you use? It's not clear from the instructions and no glue was supplied.
@nickharper64366 ай бұрын
Hi thanks for the comments and sorry the vid didn’t show the fitting of the brackets. I was concentrating on getting it right and forgot the camera 🙈. The glue I used was sikaflex 252 that I got from Amazon. Hope this helps
@lanodramallama5 ай бұрын
@@nickharper6436 Hi Nick, this doesn't particularly help, as it sounds as though you're relying entirely on the Sika 252 to hold up the laden rack! From the video it looks like there are clamps of some kind that slot over each side of the door - can you confirm? Thanks!
@nickharper64365 ай бұрын
Yes there is clamps at either end of the brackets that are screwed up snug but not too tight to buckle the door edges.
@lanodramallama5 ай бұрын
@@nickharper6436 Thank you for taking the time to reply 😊
@MotorhomeTrio7 ай бұрын
Thanks Nick 👍🏻 Have a 2020 Ducato and couldn’t work out how to remove the engine cover, was worried I’d break it when attempting to get it off, after watching this video was able to manage it easy. Thankfully like yours wasn’t much sign of rust but gave it a good spraying of ACF50 which is all I had to hand other than WD40, figured the ACF50 would be the better option but quite like your idea of using copper spray. By the way are you located at Aylsham? I’m not too far away from you if so 👍🏻
@nickharper64367 ай бұрын
Glad you found the video useful and thanks for the comments.
@TheChaplin4347 ай бұрын
We have2
@nickharper64367 ай бұрын
You’ll save a lot of money on exchangeable bottles for sure 👌
@daviddredge11787 ай бұрын
These seem very, very expensive compared to an airbag.
@nickharper64367 ай бұрын
Hi David yes they have gone up in price considerably since I fitted mine in 2022. Just looked on Amazon order history and mine cost me £260. They are now £440 😳. That said they are still really good but not necessarily a cheaper option that airbags but are easier to fit than airbags so could save something on fitting if you did a diy job as opposed to getting a fitter to fit the airbags. Both are good options although I have seen on a forum of some having problems with airbags leaking etc.
@daviddredge11787 ай бұрын
Thanks Nick
@daviddredge11787 ай бұрын
So you add spacers to increase the ride height?
@nickharper64367 ай бұрын
Yes you can but I haven’t relied on SUMOs totally and also fitted HD leaf springs!
@builderbob23787 ай бұрын
I watch this video to see how the brackets attach to the door and you never filmed it so to me it was worthless video
@nickharper64367 ай бұрын
Yes I forgot to do that and kicked myself after for not filming it 🙈. Thanks for the comments though and sorry it wasn’t much use to you!
@builderbob23787 ай бұрын
@@nickharper6436 Well, I appreciate you getting back to me. Sorry for being so harsh. Had a bad day.
@nickharper64367 ай бұрын
No worries we all have them
@peterduffy96278 ай бұрын
You should consider filming the van rather than yourself. We want to actually see the van!!!!!
@nickharper64367 ай бұрын
Hi Peter and thanks for your comments. I’ll think about that in the future although there was a decent amount of inside the van IMO
@MarkSlaski8 ай бұрын
Really helpful video Nick. It looks like you were able to lay the seat on its back while you were fitting your shunt - were you able to keep seatbelt pretensioner plug connected during the fitting?
@nickharper64368 ай бұрын
Hi thanks for the comments and yes it wasn’t disconnected!
@Adventuresonwheels908 ай бұрын
Hi Nick, thinking of getting one of these. Can you close you blind with it stuck to the screen still ?
@nickharper64368 ай бұрын
Yes I can on my van which has the one blind that pulls up from the bottom of the screen. I’m not sure about the ones that pull from the sides though but would have thought there would be enough clearance.
@Adventuresonwheels908 ай бұрын
@@nickharper6436 thanks for that. Any more video to come out soon ?
@nickharper64368 ай бұрын
Yes hopefully. I upgraded the headlights so got to edit that one and also some lights on the inside too!
@Adventuresonwheels908 ай бұрын
@@nickharper6436 look forward to it 👍🏻
@dockerandy8 ай бұрын
Hi, apparently, those bump stops are actually spring assistors and as such are supposed to be in contact with the top of the spring. ( i did the same job on my citroen camper but fitted triple leaf springs. It was over kill to be honest but it looks like the van is empty ! However i have found that the front needs raising as well now as the rear sits so high ! I also fitted new bump stops and shocks as they came as a kit. £350 from midland springs in case anyone is interested. 👍👍
@nickharper64368 ай бұрын
Thanks for the comments and yes I think they are assisters as you say. I put SUMOs on the front to. It has made a difference to the ride but only a slight increase in height to counteract my double leaf springs
@JanJarvis8 ай бұрын
Thanks for that, i think I'm sold!
@nickharper64368 ай бұрын
Yes I’m certainly happy with mine and thanks for the comments
@neilwr74428 ай бұрын
Thank you for posting. 👍
@nickharper64368 ай бұрын
No worries and glad you found it useful
@robertprice50878 ай бұрын
Hi Nick, I have just received my sumo-springs and have attempted to remove the two spacers in order to go down to one. You made it look easy in your video! Did you have problems undoing the bolt on the first one? I’m reluctant to start clamping it in a vice in case I damage it. Any tips?
@nickharper64368 ай бұрын
I didn’t clamp it in a vice and a bit of force with a socket and hand holding the Sumo spring on the floor did it for me.
@robertprice50878 ай бұрын
Ok thanks. I’ll try and source a longer socket wrench handle.
@nickharper64368 ай бұрын
I’m sure that will sort it Robert. Hope it all goes well
@robertprice50878 ай бұрын
Hi Nick, Success! I invested in a strap wrench that allowed me to get enough purchase on the sumo spring in order to undo the bolt. Thanks for the info.
@nickharper64368 ай бұрын
@@robertprice5087 cool glad you got it sorted Robert 👍
@moritzfrehse83239 ай бұрын
Thank you very much for showing, explaining and giving highly appreciated tipps for solutions. Kind regards from Moritz from Hamburg (Ducato built 2019). I will check those wholes and pipes tomorrow. So good to know the importance. Have a peaceful and healthy christmas time 🙏
@nickharper64369 ай бұрын
Many thanks for your positive comments and a peaceful Christmas and a happy new year to you and your family.