Пікірлер
@crayolascents 2 ай бұрын
Been using those for a year; I have trouble with the card velcro sticking much more strongly than the adhesive on the base, so when you pull the card sometimes you pull the sticky base half off. So buy extra sticker bases. I'm wondering if I don't need to use a much stronger after-market adhesive on the install. Thoughts anyone?
@wbcarpenter92 2 ай бұрын
@@crayolascents the one I bought is still kickin' (which I'm amazed because texas has bipolar weather and humidity shifts). Did you buy velcro brand?
@crayolascents 2 ай бұрын
@@wbcarpenter92 I buy the cards off of the esstac website; I elect for the better stuff whenever the option is available.
@jeffadams9807 4 ай бұрын
U Need The STREAMLIGHT TL-RACKER PUMP / 1000 LUMEN Light Combo...
@Thisisoscar_ 3 ай бұрын
That brick slams into your hand when shooting big boy shells
@wbcarpenter92 2 ай бұрын
That's what's on the other😃
@Detman329 5 ай бұрын
Those action bars are one piece, it won’t go back into the receiver 🤔
@johnkoenig496 6 ай бұрын
Put another shell card on the right side of the buttstock.
@googlechicken 6 ай бұрын
Just so you know Esstac also has 7 rd cards and more important are fully endorsed by none other than James Reeves esquire
@AzenBerries 7 ай бұрын
Been debating on getting this and putting it on my 80s 870
@prodbyjxff5724 8 ай бұрын
video starts at 4:27
@jeffadams9807 10 ай бұрын
U Can Also Add The TACTALOAD FLASH 5 Stock, It Allows U To Put 5 Extra Rounds In The Stock...
@dontaerahn4774 11 ай бұрын
Same with a tac 14?
@wbcarpenter92 11 ай бұрын
Can't imagine it'd be different. I know they sometime sell tac 14s with this on it
@dontaerahn4774 11 ай бұрын
@@wbcarpenter92 thanks
@DirtSickle1 11 ай бұрын
Good video!
@MrBillyd603 11 ай бұрын
don't cheap out and get the crap amazon ones... trust me
@specialk5070 Жыл бұрын
strike industries has a killer one in metal M-lok
@wbcarpenter92 Жыл бұрын
Yeah. After magpul made this the market blew up with modern/modular shotgun add ons. Good news for all of us.
@elimcclellan391 Жыл бұрын
Thank you sir!! You made this install easy. Everyone else completely disassembled the gun and absolutely no need to do so!
@vladimirlopez7840 Жыл бұрын
Great idea but the Velcro strip peels off the shotgun after every cleaning. Seems cleaning solvent or oil weeps through the pin holes and starts to make the adhesive unstick.
@crayolascents 2 ай бұрын
Yep. Also, heat from firing degrades the adhesive.
@NoWr2Run Жыл бұрын
AAAAAWWWWW LOOK AT THE DAG, NICE DAG, I LOVE DAGS.
@dslife1 Жыл бұрын
Older video, but any video that has Killswitch Engage as an opener gets my attention 🤘
@mauromartinez9236 Жыл бұрын
I like you shell holder. Details?
@wbcarpenter92 Жыл бұрын
Esstac shell holder. I have a video on that too. SKD tactical is the best place to find it.
@Piklikr Жыл бұрын
Ty sir
@Reese7tube Жыл бұрын
Your directions was definitely on point!!!!! Thank you 🙏🏿🙏🏿🙏🏿👍🏾👍🏾👍🏾
@davidyao8001 Жыл бұрын
I really like the description! But that "widget" of my gun is very tight! Completely impossible to twist and disassemble! ! I was confident I could do the mod on my own... but now I'm stuck with the local gunsmith...😢
@wbcarpenter92 Жыл бұрын
Yeah I heard some don't come with the wrench anymore. Did you try putting a heat gun on the nut and trying?
@veloh Жыл бұрын
just like a little boy with his toy, love it!
@zackwimbush Жыл бұрын
8 years later and this is the best video to date on how to install the MP MOE. Nicely done. I'm in CA too - so not a lot of people I know utilize the 2nd Amendment.
@six5blanco Жыл бұрын
Awesome vid, I just received mine along with the magpul SGA stock. I'll be changing the furniture this evening, thanks for the tutorial.
@shawnchi7189 Жыл бұрын
What's part number for that castle nut wrench
@anthonymaster6160 2 жыл бұрын
Your shotgun would look even better & even more tactical if you change that stock to Magpul SGA Stock & add Magpul flashlight mount to that Magpul forend.
@anthonymaster6160 2 жыл бұрын
You should upgrade your stock with MAGPUL’s SGA Stock.
@wbcarpenter92 2 жыл бұрын
I did. Great stock! The shortened LOP makes it great for full barrel with less presentation in close spots.
@westcoastwarriorsarchive7929 2 жыл бұрын
Have you had any problems with the velcro peeling off? I hve some of those esstac cards and they keep peeling the velcro off my 590a1
@w.w.9047 Жыл бұрын
I have. Mine won’t stay on. I degreased, tried heat, no heat…it always peels off.
@westcoastwarriorsarchive7929 Жыл бұрын
@@w.w.9047 what, brand of velcro are you using?
@w.w.9047 Жыл бұрын
@@westcoastwarriorsarchive7929 whatever came with the cards. I believe 3M. Not certain on that though.
@crayolascents 2 ай бұрын
Sounds like we all have the same problem. Heat (from firing) degrades the adhesive. Cleaning agents degrade the adhesive.
@wbcarpenter92 2 ай бұрын
@@w.w.9047 I was not aware they came with 3M or proprietary female cards now. I just got this backer at HD or lowes
@MrKfq269 2 жыл бұрын
On the carpet? Really?
@wbcarpenter92 2 жыл бұрын
Baller on a budget. I was 19 with no house or shop of my own 🤣
@airsoftluke17 2 жыл бұрын
hows it holding up mate?
@wbcarpenter92 2 жыл бұрын
Solid product, still stiff. Speed bumps and running don't move these. Sling transitions will scoot shells sometimes though.
@SamuelSalzman 3 жыл бұрын
How's it holding up almost 8 years later?
@wbcarpenter92 2 жыл бұрын
Still kicking. The shells have to be put in on purpose no falling into place or out of. I'm amazed by the retention.
@jaymanjay1030 3 жыл бұрын
Make some by cutting a 60 shell bandolier. 15 bucks each is ridiculous. Just cut a bandolier and burn the ends so they don't fray, sew on some 550 paracord and you're rocking.
@juliopatino4014 3 жыл бұрын
Cant you just remove the whole action itself and do it outside?
@duccimann9089 3 жыл бұрын
Now all you need is the SGA stock!
@wbcarpenter92 3 жыл бұрын
Finally put it on last year. Has a DPP on it now too 😎
@mtnride4930 3 жыл бұрын
Will this fit on the express magnum?
@RAYRAY-yt3hz 3 жыл бұрын
👍🇺🇸🗽
@davebewshey1549 4 жыл бұрын
Got to pull that pump back to maximum before installing
@wbcarpenter92 4 жыл бұрын
The moe 870 grip has the clearance. It sits in the same place as all market metal and plastic side saddles.
@davebewshey1549 4 жыл бұрын
He can't rack the slide is going to hit his velcro shell holder guaranteed that's why he didn't rack it. I know how far the pump comes back
@wbcarpenter92 4 жыл бұрын
False. It works, lower case "dave".
@bradxgregory8864 4 жыл бұрын
Is this the express magnum? And what inch is the barrel ?
@wbcarpenter92 3 жыл бұрын
Its the regular express tactical. No magnum. 18.5" and 3"
@thebrazenone6975 4 жыл бұрын
for anybody who comes across this video, attempting to remove the castle nut, let me save you the time and energy because ita physically impossible to remove the castle nut from this gun. mine is new not used and the castle nut would not budge a hair no matter what was done. sending this grip back and probably going to sell this gun for a more reliable and less pain in the *** mossberg 500.
@wbcarpenter92 4 жыл бұрын
"Weird flex, but okay"
@cleverkittn 2 жыл бұрын
I could not get mine off, either. It simply would NOT budge, even with muscle. But I love her otherwise so just sad.
@omarbueno9834 2 жыл бұрын
Lmfaoo weak ass puss boys mine was brand new and was a bitch to get off but I ended up gripping the tool with a rag and made sure it was engaged properly and boom I made it happen
@Itsbigzev 4 жыл бұрын
I heard these express tacticals jam sometimes but I really want one but I also don’t want to die from a guy because the shell jams does yours jam? I would get a mossberg 500 but I don’t really like them and I grew up shooting my dads wingmaster so do they jam a lot?
@wbcarpenter92 4 жыл бұрын
Pump shotguns are almost all mechanically identical for the exception of action bars and extractors. You just have to break them in and make sure you put them back together tight. Mine doesn't jam.
@lizzardmoto9386 4 жыл бұрын
Great video dude!
@Bforgie2 4 жыл бұрын
When I pulled my castle nut off, it was finger tight..from remington..
@wbcarpenter92 4 жыл бұрын
Yeah. Remington QC has been not the best the last 5 years.
@330iBMW330i 4 жыл бұрын
Great job
@tomstiener1284 4 жыл бұрын
You can see nothing what this guy actually doing coz the camera too close
@wbcarpenter92 4 жыл бұрын
*critiques in improper english.
@NukaColaQuantum 4 жыл бұрын
Thank you!!!!
@wbcarpenter92 4 жыл бұрын
You got it.
@3nigma.3nc 4 жыл бұрын
I cant get this god damn fucking nut loose. Straight out of factory and it has apparently been personally installed by Hercules himself.
@johnkoenig496 6 ай бұрын
MEE TOO !!
@benayahjudahmaccabee5300 4 жыл бұрын
Thanks for this video. It's the best one on the subject. Others would have you take apart the whole shot gun for this.
@wbcarpenter92 4 жыл бұрын
Thanks bud. Hope it works out well for you.
@crowsbridge 5 жыл бұрын
had to file my magpul forend down a little where the action bars go on the Civet 12, but this was pretty much exactly what I needed.
@wbcarpenter92 5 жыл бұрын
Thats good to hear. I am glad I was of help.
@paulmood308 5 жыл бұрын
Cannot hear you.
@wbcarpenter92 5 жыл бұрын
Turn the volume up
@CAVlogs121 5 жыл бұрын
Is this purely aesthetics because stock Remington stocks and forends work fine.
@wbcarpenter92 5 жыл бұрын
The remington forend feels and functions great. The magpul is advantageous for its wider grip and MLOK slots so you mount grips, lights and handstops at 2,10 and 6 o clock positions
@CAVlogs121 5 жыл бұрын
TacticalBerserker oh ok. Ty for the info.