Chris Romano

Пікірлер

@JamzJB 28 күн бұрын

There are 7 screws on there. 2 on top 2 on the bottm, 1 upfront and 2 on eich sides of it and yeah how much eliquid shuld be used for it as in how much mg would do, i got one last year for my bithday and it came with a 3mg 60ml bottle on the other hand someone told me that I can use upto 18mg eliquid, thanks.

@CÆSSIUS32 Ай бұрын

Hey mate, I have Avan props by Emax. The centre hole going on the stator is so tight when it's very difficult to pull them off. But the screws don't fit easily. So tight it feels like I'm going to damage the hole. But putting the screws in the wrong way upside down is easy. They fit properly but the correct way is so difficult that I don't know what to do.... 😳

@chrisr112887 Ай бұрын

The center hole is often tight. As long as you can push them on all the way, don’t see an issue. A prop removal tool will help to get them back off. As far as the screws, hard for me to say not looking at them. Could be the screw holes aren’t lined up correctly. They are tiny and can strip over time. Has happened to me plenty. Unfortunately you have to replace the motor. You can try some blue loctite if the screw doesn’t tighten all the way. If it’s just tight going into the plastic part of the prop, again no issue there. Just tighten and loosen the screw a few times off the motor, that should free it up a bit.

@SamSachdeva-k4e 2 ай бұрын

Sir I bought this coil which shop and website this coil??

@chrisr112887 Ай бұрын

This is a very old system. It’s probably no longer available.

@HalPolly-f2o 2 ай бұрын

Diego Groves

@ConstancePaula-g6n 2 ай бұрын

Berneice Orchard

@DeliaSaum-d7n 3 ай бұрын

Powlowski Alley

@GregoryMobley-c6l 3 ай бұрын

Emard Islands

@ValentineHowar-y2o 3 ай бұрын

Boyle Camp

@gianfrancovantaggio5085 Жыл бұрын

Ma in italiano no.

@watchthemaster5906 Жыл бұрын

Can I solder the power cables directly to the battery leads?

@vicsovain3831 Жыл бұрын

GREAT REVIEW 👍

@KCQuadTronX Жыл бұрын

greatvideo and good details...Thanks for the beautiful art and inspirational education....God Bless!!!!!!!!!!!!!!!!!

@dailydronejourney Жыл бұрын

how the test ?

@AFRoSHEENT3ARCMICHAEL69 Жыл бұрын

Why with all the warnings just to post a comment? Brittle spirit?

@AFRoSHEENT3ARCMICHAEL69 Жыл бұрын

They got rid of these again. They're stupid AF. No one likes the tobacco flavor of the Alto. Whoever is running that company is so out of touch it's like get a FN clue you mormon.

@peterhou4998 Жыл бұрын

Thank you. This is the tutorial I was looking for few days.

@paulwingle1113 2 жыл бұрын

Hi! Do you have anything left package/device after this review? thanks

@ontoknow18 2 жыл бұрын

Hey what kind of speed controls did you use and what kind of motor and happy flying

@taytay3724 2 жыл бұрын

I have and love and vape my vuse Alto device daily I have 5 devices 2 black 3 blue

@Kaustubh3024 2 жыл бұрын

What’s the Max flight time?

@codcityus 2 жыл бұрын

How do you know when the battery is fully charged

@CarbonGlassMan 2 жыл бұрын

Do you know if these will do bidirectional dshot? I had a 2 wire 32 bit esc and a 3 wire (one wire being telemetry). The 2 wire one won't do bidirectional but the 3 wire one will.

@josevalentin8168 2 жыл бұрын

I don’t even know how to change the propellers

@chrisr112887 2 жыл бұрын

Pressure fit. Just get under them and pull off.

@alecnewman6052 2 жыл бұрын

Will 250 mah batteries work?

@Freebird_67 2 жыл бұрын

Damn that was annoying

@CARandDRONE 2 жыл бұрын

Great channel come back! I lost my instructions for this lil burner and appreciate the walk through.

@quinngagliano9597 2 жыл бұрын

What size propellers are these?

@aprilcocoa328 2 жыл бұрын

Too much talking about the name damn get to the point

@swedesspeedshop2518 2 жыл бұрын

So how in the heck do you use Facebook or Instagram on this watch ?

@jacksonwitwer4910 2 жыл бұрын

On the second clip, at about 30 seconds that features #77 at the start, any idea where/when this was. I think that was my dad

@kwitwerikok8o863 2 жыл бұрын

Nope it wasn't me. #77 wrong helmet wrong leathers, # 3 right helmet style wrong #, I have never done an indoor short track that short. I raced at indoors with names like , Steve Moorehead, Bart Markel, Jay Springsteen, Gary Nixon. I was a novice professional where we were combined novice, junior, expert professional together until the late 70's. They may have had the junior amateurs run before the Professionals but we didn't usually see them. All good fun and gladiator type racing. Most of the indoors on concrete were the length of the hockey arena ice. Lap times were somewhere around 6 or 7 seconds. Popular motorcycle at the time was a 250 Yamaha in a Champion frame. A very forgiving set up.

@Wayzata14 2 жыл бұрын

Feb 2022 - This is the best intro video for understanding how things work in fast succession. I like this guy!!!

@zaiizaii4669 2 жыл бұрын

can someone tell me what other antennas work with the goggles

@chrisr112887 2 жыл бұрын

Any Fpv antenna made for video. Just make sure the thread and pins are in the correct place.

@aimdiego_3250 3 жыл бұрын

god i hate you

@chrisr112887 3 жыл бұрын

Thank you! 👍🏼

@devinburesh4688 3 жыл бұрын

Dude, can you say why I can auto launch and with three seconds it's stuck and won't fly.

@lawdog516 3 жыл бұрын

The music is distracting and takes away from your content!!!!

@janvollgod7221 3 жыл бұрын

I love cthulu rta's but this one,w as the worst pos i ever had. This juice flow jam's everytime. The fill cap is also a pain in the ass. You need a letherman with this RTA. With the single deck you will get flow problems, no matter what you do. I throw it away.

@austincorrales2290 3 жыл бұрын

my old vuse broke for no reason so i bought a new one. i was drinking with some friends and slid the pod in and out, in and out, while having a conversation and it stopped hitting. i put two and two together and that’s how my first one got ruined. i’m assuming the connections got messed up but is there any way to fix that?

@luigipy4611 3 жыл бұрын

Im gonna Buy one bye this weekend uwu

@caligogaming592 3 жыл бұрын

moj jkart di moj kardi moj moj mjoj mjoj mioj o

@codymayer6335 3 жыл бұрын

disliking bc you vape

@MRdeLaat 3 жыл бұрын

fck this hobby im not buying 400 euro drone 600 euro dji and stil fck about with tiny wires doing complicated shit

@gabybrown9800 3 жыл бұрын

I'm Gaby from SYPOM. Could you please do a professional review or test about our lipo battery. If you are interested, please feel free to e-mail me at [email protected]. Your reply will be highly appreciated.

@unstablenothing8316 3 жыл бұрын

Cheaper? They're 99 cents here 🤣

@pofrani 3 жыл бұрын

Hi - so this doesn't need Smart Audio?

@chrisr112887 3 жыл бұрын

These use tramp telemetry. Not smart audio. Those are different protocols. “Smart audio” has also become sort of a common name for the function of controlling a vtx through the osd.

@2000Dnard 3 жыл бұрын

Thanks for this, bought the one that goes up to 1k. Just connected, have to print a different 3d piece to hold my antenna since it sticks out the back a little further that the original one, Hawk 5.

@jerryhall7156 3 жыл бұрын

Nice when you try and show how to bind it you hide the bind button so no one can see it nice

@nova_logic751 3 жыл бұрын

My led stays green in mine it doesn’t change in color is it supposed to not change?

@gmgrobotics6062 3 жыл бұрын

The led is always green, it will flash 10 times when it is dead

@one-stopnews2736 3 жыл бұрын

Wolfwhoop Q1-pro is the way to go

@TomColontonio 3 жыл бұрын

Where can I buy those tweezers?

@chrisr112887 3 жыл бұрын

Ceramic tipped tweezers. eBay, Amazon, the internet.

@lordtickles1478 3 жыл бұрын

You quit youtube?

@chrisr112887 3 жыл бұрын

Life changes. Stoped buying so much gear and couldn’t fly as much. Now I’m a bit behind on the newest tech. It’s a lot of work and money to make videos.

Ең жақсы KZbin

Пікірлер