Texan EDC Cave

Пікірлер

@DonaldChapman 10 күн бұрын

So disappointed in my recent warrant experience. (11/2024) Scissors were not tight on my new ARC Obs, so I sent them in. After a month and a few unanswered emails, I called and waited over an hour. I spoke to a nice girl who told me that I should have been contacted to tell me they couldn't find a problem. I never got any call, email, etc. I hope it was just an oversite and a one time thing. Other than this experience, I would say my past experiences have been stellar!

@garywinkel1831 Ай бұрын

Good video.

@AlexKost-tq6bj Ай бұрын

The nice thing with the anodized alu is you can tell how much someone has actually used their knife. If it was used regularly you see clear wear/fade marks. This knife barely looks worn. A 5 year review on a knife that mostly just sat there is a bit misleading imo.

@Sammysosa518 24 күн бұрын

I feel like that is 90 percent of these knife community reviewers they “use” the knife for like 2 weeks and then are like ya it’s amazing lol 😂 how tf do you know

@rickym1889 14 күн бұрын

Maybe he uses it a lot but also takes care of it ?😮

@AlexKost-tq6bj 8 күн бұрын

@@rickym1889 not sure how that's possible, the anodizing literally wears off from handling it (i.e holding it in your hand and cutting things). I'm not talking about abuse or improper use, simply taking it out of the drawer regularly or having it in your pocket

@SavageVoyageur 2 ай бұрын

Please tell me the exact model of that red dot. Thanks

@SavageVoyageur 2 ай бұрын

As long as you white labeled the sides, you should also paint the Ruger label on the take down button.

@MacD2029 2 ай бұрын

Did you put a different screw in the front (the one thats not being used by your new reddot mount)?

@Cooldibs 2 ай бұрын

@@MacD2029 no sir. The pistol comes with set screws on the holes. You need to take them out to use them. In this case, I left the front one on the gun since this mount does not use it

@Robbinblox 2 ай бұрын

Yes meke a video oh how you do all the letters 👌🏻

@other4819 2 ай бұрын

CCI is the best way to go w Ruger's I've tried others and some don't even feed.

@AlanMarcaski-hw5mu 2 ай бұрын

I closed one on my hand. As it was happening I knew I fucked up too. But it never happened again before or since

@MarkCorley-h3q 3 ай бұрын

1/4 inch groups at 30 feet,,,Idoubt that!!!!!!

@Prepare2Survive 3 ай бұрын

If I can't co-witness with the iron sights I want a quick detach feature to remove the optic in case that's needed. That means I would probably just use a picatinny rail with a holosun QD picatinny mount.

@JasonKent-n3j 4 ай бұрын

I’ve carried at 940 to work every day for years. Like you said not the salacious blade but a good work blade.

@BluedMarble 5 ай бұрын

Whoa how did you color the letters on the metal?

@BluedMarble 5 ай бұрын

Is that the TALO edition? Also you need to get the Tandemkross lower Kraken for it.

@4OriginalGOV 5 ай бұрын

That’s awesome that they sent you a new knife because they couldn’t completely repair the old one and sent the old one back. 20+ year bench made collector just getting turned on spiderco. Thanks for the video.

@sledgehammer8146 5 ай бұрын

I have had the Endura 4 (drop point blade, VG-10 steel) for 5 or 6 years now. Was out on the boat the other day and lost it, bought a new one next day (Endura 4, Wharnecliffe blade, K390 steel). Then I found my original one! Sweet! Now I have two. Overall best knife I have owned. I'm interested to see how I like the K390 steel and the Wharnecliffe blade; so far I like both better.

@Heikki_Finland 6 ай бұрын

That's why they are so expensive. The Wave is worth some 50 $, but you pay 100 $ so if it breaks, you'll get a new one that you already paid for. It's as simple as that. I'd rather buy it cheaper without warranty because i know i never abuse it. It's me that is forced to pay for other people's abusement. I'd prefer a self service system with a lot of spare parts available, this way you could even modify it to match your needs. I could break a couple of tool every now and then and it would still be cheaper to repair than having that warranty. The warranty doesn't cover if you lose the multitool. In that case you'd wish they were cheaper.

@nunyafuckinbizniz 6 ай бұрын

Feel the same.

@stirfry741 7 ай бұрын

Does this cause failures? I want to run this mount but it feels like they mount it in a bad spot?

@Cooldibs 7 ай бұрын

Not sure what you mean by a bad spot. Are you worried about the case hitting the mount during cycling? If so, it’s not an issue. The casings have never hit the mount on mine.

@stirfry741 7 ай бұрын

@@Cooldibs yeah that’s what I was wondering not that reliability is even a concern in these guns I’m just running a suppressor and it’s gets finicky after 500 rounds don’t wanna clear a jam every 3 rounds cause of the red dot lol

@Cooldibs 7 ай бұрын

@@stirfry741I getcha! I have not had a single round come close to hitting that.

@MyLostToys 7 ай бұрын

The Omega springs are a turn off for me.

@sergiodaniel9790 8 ай бұрын

I believe Benchmade will replace your blade for a small fee

@kellywalton4195 8 ай бұрын

Love what you have done to it. How do you do the white lettering and do you have a link for the new trigger?

@christophersmeltser6564 8 ай бұрын

Great idea replacing it yourself. You’ll make a springs or decently cheap for a pack and sure beats paying for shipping and insurance to send it back every time. Eventually you will have paid over the price of the knife just to send it in for repair.

@ericwheat9540 8 ай бұрын

I have this exact same pistol, blued and everything. And I bought two extra magazines for it.

@jetheridge3798 9 ай бұрын

I just broke my bottle opener today 🥵

@carlangstrom3025 9 ай бұрын

Leatherman is outstanding. Glad they took care of you.

@ericwheat9540 9 ай бұрын

I just bought one of these. I should pick it up next week. I like how you did the white lettering. I’d like how

@bjjbrawler1 9 ай бұрын

Thanks for the review! I never knew the MKIV blued lowers were all aluminum. With the shorter barrels, they may be better shooters, who knows lol...

@Ken-br3vl 10 ай бұрын

You can dry-fire all Ruger Mk series pistols without concern of doing harm. Ruger even states this in the manual.

@Cooldibs 10 ай бұрын

Yes, I just don’t like making it a habit because I own other 22s

@wkwong80 10 ай бұрын

That’s awesome! I have the Wave 1 & broke the stop tab on the serrated blade soon after I got the tool. I lived with it for 20 years. I think I’ll finally send it in to be repaired because of your testimony. 👍🏽

@randallr8038 10 ай бұрын

I’ve sent my wave and my surge back for warranty work. They came back like new. Leatherman is the best.

@christoFlair777 10 ай бұрын

The holosun mou😢is awesome 😎!!!

@christoFlair777 10 ай бұрын

Mount

@christoFlair777 10 ай бұрын

Looks awesome!! I’m picking up my mark4 hunter this Friday.. how do like the red dot?? Holosun??

@Cooldibs 10 ай бұрын

Really like it! Haven’t had to change the battery yet either. It’s the 407c X2

@christoFlair777 10 ай бұрын

@@Cooldibs thanks dude!!!

@pamtreadway2233 10 ай бұрын

I bought the lite the sights suck.

@paulmanhart4481 10 ай бұрын

Nice touch with the labels. Did you use a laser? I have a Mark IV Target with picatinny rails. I want to put on a Holosun green dot but not sure what mount to get. What did you use? Thanks, Paul

@Cooldibs 10 ай бұрын

I actually have a video showing how I did the labeling. The mount is a lobos industries mount. Easily the nicest mounts for a ruger 22 pistol. They offer them in all the different mounts available.

@sigiligus 11 ай бұрын

It’s basically the one folder to rule them all. Yes, plenty of folders have better steels, but they are more expensive and harder to sharpen. Yes, plenty of knives are more robust, but how often do you need to baton with a folder? Lots of folders do lots of things better, but the Endura is the ultimate in folding knives as general purpose utility tools that anyone can afford and maintain.

@tonymaciel7687 11 ай бұрын

I had my springs break on my 940 & replaced them with some eBay ones and never had a issue. Even added a little tension to the lock. Sold my 940 and I regret it so much I just ordered another one yesterday. Gave up on Benchmade a long time ago except for the 940. Can’t live without one.

@tonymaciel7687 11 ай бұрын

All axis locks have a little play. No worries there. I gave up on Benchmade a long time ago. Except for the 940. Can’t live without one.

@seanwhitman4365 11 ай бұрын

I have the pacific salt version. Its my fav knife ever

@mrc2205 11 ай бұрын

The Butterfly tax is there for sure, but personally I think you feel it in the knife. It’s so smooth compared to other knives.

@trevorthomas1030 10 ай бұрын

You pay for a lifetime warranty on every Benchmade knife because they'll take care of the knife for you for the life of the knife wether thats 5 years or 50 years. That is why Benchmade is King.

@barkingspider2007 Жыл бұрын

2012 Endura in ZDP189... And down the rabbit hole, I went. : ) Thanks for the video! 😎👍

@trevorthomas1030 Жыл бұрын

If they break guess what send it back to benchmade and theyll put in brand new ones. No worries.

@Cooldibs Жыл бұрын

Yea, that gets annoying after 6 times….

@trevorthomas1030 Жыл бұрын

@Cooldibs , If you're rocking your knife that hard, I highly recommend you get a Benchmade shootout because it's made to retract and doesn't have those Omega springs in it. I think the Benchmade Shootout is more of a knife for your heavy fidgeting and / or opening constantly needs.

@Cooldibs Жыл бұрын

@@trevorthomas1030 nah. Got some Etsy springs and haven’t had a problem since. Love the knife!

@trevorthomas1030 Жыл бұрын

@Cooldibs , Can you do me a favor and let me know the link so I can pick up some of these awesome springs? Please and Thank You!

@elusivellama Жыл бұрын

Nah, I won't put up with Benchmade and omega springs. I don't need my knife's locking mechanisms to require replacement at unpredictable intervals.

@ksrebelbuck7936 Жыл бұрын

I just got one today for $70ish bucks, love it to death

@myflatlineconstruct Жыл бұрын

Far before you picked it up, i swam in circles of emt , law enforcement, and street life. It may be dated and there might be improvements, but this is a true tool that will last.

@mk.1175 Жыл бұрын

I like spyderco but that knife is not nearly as strong as a cold steel.

@sigiligus 11 ай бұрын

True, but it’s also nowhere near as thick and heavy as a Cold Steel. That’s what makes this knife so amazing, the lightness and thinness for the size.

@mk.1175 11 ай бұрын

@@sigiligus cold steel code 4

@Theylive4213 4 күн бұрын

@@mk.1175 Still heavier and has zero grip with wet hands compared to endura. Dont even think they make the code 4 anymore.