Exactly what I needed... Thanks~!!

than ks

Not the same model but same issue. I believe the drain port is clotted. Every brank of refrigerator seems to have this kind of problem. I am now searching videos on KZbin ...

very good 👍 thank's

Using the hairdryer for about one minute at the base and I was able to get the frozen KitchenAid filter out. Thanks for these comments, which gave the solution!

i love this part

Thanks to everyone in the comments.... the hair dryer worked.

Is that plaid in the key of the flute , or does it need transposed for the flute?

thank you....we are trying to make a remake with Frans & Friends....saving time...much easier now !!

gracias totales ...sensei

What is you tone sir ...its very nice

Hairdryer worked!

i came here looking for love, i left marrying someone in my head 😩🤩🤩🤩

it actually changes the second and third time through (goes up to the D arpeggio early)

Such a great intro

I thought that the author would play the full version of the composition Alan Parsons, but, as it turned out, no, unfortunately.

Yep, I was going to say you have a crack from the freeze somewhere…but glad to hear you figured it out… mine needs new packing behind that nut,that’s how I came across your video.

I found the problem. The 8" copper pipe behind the faucet had a split, probably due to ice expansion. Entire spigot assembly (which includes the copper pipe) has now been replaced. Lesson from this for me: remove hose from spigot before freezing weather arrives. Maybe an insulated faucet cover would help as well.

Thanks it really helps me play the Flute part. I play drums want to fill in with Flute in song. Can I get the sheet notes for that?

Mine was doing the same thing. I figures it was caused by a small crack in the pistol that create enough leak to loose the pressure so the motor would start to build the pressure, stop, loose pressure, start and so on. I am looking for a pistol replacement right now because I don't think my repair will last very long.

Excellent stuff.

Heating up the base of the filter with a hair dryer worked like a charm. Thank you, good people

Not the same model but same exact issue. Did you ever find out what the problem was?

No. I'm going to be your sensei

I have the same problem with my bike and I’ve looked up everywhere but there’s just nothing :(, did you figure out how to fix it? Thanks!

Thank you so much for posting this fix. The hair dryer warming it up worked like a charm. 2 minute fix.

Thanks for this problem solving tip pashmee! I heated the connection to the filter housing for 2 minutes with a hair dryer set on low heat. The filter loosened from the filter housing but did not fully withdraw . Another 1 minute heating and it came off easily. Before installing the new filter I lubricated the connection with edible coconut oil.

Hi, did you find a solution for this, mine is stuck as same way as your, appreciate if anybody answers this problem

Hi same problem her any solution yet? I am planing to take apart the whole top to see please advice if any posible solution

This worked on a different refrigerator (below) but I see yours is different.. What I might do is get a screw-tighten steel hose-clamp (like old cars used for radiator tubing) and tighten it closer to the plastic connector... then use a screwdriver or other tool to lever the filter out - I think it's just a matter of breaking a suction seal.. (my guess) "I solved it by turning it to the left and using an audio cable (about 1/8" thick) and wrap it around the grooved area and squeeze the cable tight.. then it essentially popped right out"

Second part reminds me of Enjoy the Silence by Depeche Mode

I used a flat head screwdriver and just twisted and finessed the filter out. I don't think the seals were part of the problem I think it was the grooves were offs slightly.

Same part. kzbin.info/www/bejne/r6TbpHh7bJJkY7M

I tried the hair dryer method previously and it worked. But not this time. I used the hair again today to heat up the housing. After the 6th attempt I put a flat screwdriver blade in the grove of the water filter and gently twisted it against the filter housing while pulling on the filter. The downward pressure of the screwdriver finally loosened the filter and I was able to extract it. Mind you, I had greased the O rings on this filter and grease was still intact. IMHO, this was just poorly engineered. Good luck my friends!

Hairdryer worked beautifully. My husband fought our filter for a year I swear and I pulled out the hairdryer and had it replaced in 5 minutes. I pretty much looked like a genius to him haha

The heat gun on low for about 60 seconds worked for me too! It was a different Kitchen Aid refrigerator but the same general idea. I just pointed the heat gun near where it connects and moved it around for about 60 seconds so it wouldn’t get too hot. So glad I found this video!

I had the same issue with my KitchenAid Refrigerator water filter. I follow the instructions and use my wife’s blow dryer. Came off in less than two minutes thank you for the advice😁

Use the hair dryer blow the outside, with the heat I will expand and lose the filter inside. I got it out today.

Many thanks for sharing!

If your meats are stuck in the frozen side, not easily to come out. Dump lots of water will work.

So, if the filter stuck, then stop to replace it.

this is what i was looking for, thank you. Also, if you don't mind, could you tell me the notes of the riff please?

Water filter door has to be at 6 O’clock position-magic- used filter comes right out for replacement

Same issue. I tried to relieve pressure by pressing water button, tried again turning and it released and popped out.

Hola amigo! Encontraste una solución al problema? También tengo el mismo modelo de equipo y el mismo problema, aún no le encuentro solución, pienso que podría ser el cabezal de la bomba, quizás las pequeñas válvulas que se encuentran ahí estén dañadas, pero no estoy muy seguro, ya que esas válvulas son las encargadas de la presión.

This video is the closest I could find to my situation. Unfortunately, mine is an inside-the-fridge-box door that rotates upward. The door is stuck. Last time I replaced the filter I called the retail business where I bought the refrigerator and they told me to put more force on the plastic door. I did, not feeling very comfortable about the amount of force needed but it snapped open. This time I'm using all the force I can muster and it's not popping open. I could apply channel locks or vice grips but I really think I'll break the plastic. I can't believe how difficult it is to change the filter, something that has to be done regularly and certainly shouldn't require calling in a service technician.

I simply used a pair of channel locks to break the filter free. It was just crusty. I don't believe the filter had ever been changed when I bought the house. I tried to remove it by hand and it would only turn 1/4 turn. Did not cause any damage to the system. Did chew up the old filter a bit.

I tried it and figured nope. Used the hairdryer...nothing. did it again and BOOM it came out! Thank you!!!

I almost forget, the original timbre was a real Clavinet used on superstition, so the model is D6 and the set is probably on DB (both pickups, in phase) and Alan sampled this on the old Fairlight CMI. I believe you can extract one WAV note from Clavinet samples like Scarbee Clavinet or better, the Clav from Soniccouture for Kontakt (yes!!). After this, you need to change some filters, probably the attack using some compressor with relation with the attack. This timbre looks like has a long attack at intro but short at final, and I believe there is a chorus effect too. You can create and config this in mono track whith stereo reverb at 129ms, and the delay pan hard rightn the mono track totally at left. Thank you again!

Alan once a time said me ''The Sirius song was a triple note delay''. I don't know if he used a dotted eight note plus a quarter dotted eighth (1/8. + 1/4.). At least you can hear a 1/8. on the studio version. The 1/16 is set at 129ms (the same probably you used on this tutorial) is more use in live versions. I'm sorry my English, I'm a little bit rusty. if you know what he meant about ''triple note delay'' please comment below. Thank you very much, cheers!