I had to take my Maytag dryer apart cuz it's squeaking great video I wouldn't have been able to do it without this video thank you

Awesome video number one expainitorial 👍👍💪💪🥇🎖️🏆🌟⭐👏

Nowhere on my machine does it describe itself as an Atlantis or Neptune Dryer. It says it is a model #MDE9606AYW Intellidry 6 cycle, but that model number does not match up with any KZbin repair instructions. Instead it looks identical to the Atlantis/Neptune model dryer discussed in this repair instructions. When I dry clothes, I get in the habit of turning the drum clockwise to check for any remaining clothes. This last time I spun the drum counter clockwise, which released the belt from the tensioner. Lesson learned. I really appreciate your repair instructions, as they were incredibly helpful. You are a good man.

Perfect to follow. Got inside and fixed squeak. Thanks

I repaired my dryer by myself for $8.99 thanks to this video! All it needed was a new belt. Once the dryer was disassembled it was easy to spot the problem, order a new belt & put the dryer back to gather again. I also did a deep cleaning & de-linting of the whole thing while it was taken apart. Dryer up & running as beautifully as always once again! Videos like these are the best thing about social media - Thank you!

Excellent! Thank you.

Great video! Thank you! I canceled my PayPal because of a scam. Are you set up on Zelle, perhaps?

Great video, nice detail

All I need to fix is the door catch. It looks like a lot of parts to remove just to get to it.

I found the same thing. I checked the belt and it was in good shape. I took off the pulley wheel and inspected it as well. I noticed the Blue Thread Lock that holds the nut supposedly secure was mostly gone. I cleaned the threads, nut and wheel with alcohol and a toothbrush. I added a flat washer and Blue Thread Lock. It worked for over 2 months. Unfortunately this washer was only about 2 years old. Currently I'm going to try a nylon threaded nut and more thread lock.

What size belt and we’re can I order it from

Thank you

Thank you sir this video definitely helped 😊

Thanks for posting this!

My dryer stopped heating, but still spins normally, I cleaned out all the lint. Any suggestions or first things to check?

Can the gasket in the back of the drum be replaced?

Easy to follow

Thanks!!!

Great video thank you! Do you happen to know where the long springs attach to? It’s two of them and I think they are door springs but I’m not sure where they go.

Cannot seem to get those end caps off! Grrr Would love a close-up of back panel while you are removing them

Is there a video that shows how to put it back after diagnosing? 😊

Mine starts but it starts to smell like something is burning and then it shuts off. The breaker isn't tripping so I know it's not electrical at the outlet. I took it apart to what I could and then put everything back.

Great video man. Helped me out tremendously. I could not figure out how to open the top to get to the belt. Job is complete because this awesome video. Thanks!!!!!

My control unit is attached to the lid and I cant figure out how to get the dern thing off

Perfect! Thank you so much. And I found the source of the awful noise. Little rare earth magnets and a wood screw stuck to the drums edge. A bit of cleaning and it's good as new. Thank you for your wonderful instructions

Thank you. You just saved me a few hundred dollars just to replace one baffle. Appreciate you!

I never would have figured this out. Thank you!!!

Thanks for this helpful video!!

Having a transmission and drive shaft connect to the tub is a very poor overcomplicated design of a washing machine. The belt should simply attach to the tub itself. Whirlpool owns 70% of the appliance market and every appliance is now made in Mexico at the same manufacturing plant. The insides are identical with the outer frame and badge being all that is different. Sometimes the board and buttons are different in their location, but operation of the machines are the same. Just fyi. And Mexico is not known for having a High Quality Control of their manufacturing processes. Only U.S. washers and dryers - Speed Queen. Well worth the money.

How do I remove belt without breaking it

Thank you!

This looks just like my dryer, belt went and called a company sent a young guy who really knows nothing about the older machines only been doing this since last August, anyway he couldnt finish cuz he was getting agro so he will be back tomorrow around 5pm, grrrrrr.. He put it back together we tried it barrel not turning with new belt but I could mover with my hand before, he didnt put the hook things back on, Im disgusted

Thank you for making and posting this. It's clear and paced just right. Thanks for mentioning your other video for lifting the console panel held in place differently on other models of Kenmore dryers.

I have a Kenmore series 80, and aside from a few extra screws holding on the vent cover this worked perfectly, great video :)

THANKS!!!

I had a pair Maytag Atlantis washer and dryer, had them 22 years washer went last year trying to find a replacement washer has been bs, Iv gone through 5 now, water level is crap or they making knocking noises like they are gonna explode or shake like they are going to take off, finally though I found a good one till I find out I cant reach the flipping cloths and the cold water button doesn't work. Now my dryer decided to stop turning on my last load of clothes, ugh. So hope this is it because I had a simple repair on it one other time, 350$$$$$$$$$$$ wont do that again, just buy a new one, THEY DONT MAKE ANYTHING LIKE THYE USED TO!!!!!!

Thanks. Was way better than buying a new dryer

Thank you for the tutorial. I saved my folks a service call with a replacement of a thermal fuse. I will also replace the timer soon as well as ours is worn out.

Thanks for the tutorial. There was a loud tick every revolution of the drum . I thought something was slapping the side of the body of the dryer. When opened, thanks to you, I found that one of the screws ,that hold the “paddles” that are on the inside of the drum, backed itself out almost an inch and was now hitting the inside of the side of the body of the dryer.

I need your help. I am up here in communist Canada and my Kenmore 90 series dryer is not starting. I first checked the circuit breaker and it’s fine. I noticed the door switch was no longing clicking and just dangling and the light in dryer would not come on when I opened it. So I replaced it. Dryer still would not start. I tested the thermal fuse with multimeter and it was unclear so I replaced it and still the dryer would not start. I tested the start button and it is working. Is it fair to assume the terminal/electrical port is fine bc the light comes in when I open the door so there is power to the dryer? What else could it be? Help

Thank you very much. This made a very scary job easy as can be. I had an air pod that got jammed in the blower of my Maytag Neptune dryer. This video made it a simple job that took less than 30 minutes.

very helpful! thank you, Ken!

Do you have a video on how to put the dryer back together? I had a friend helping me with my dryer deep clean and we can't get the felt back in correctly so the drum isn't lining up correctly. Any suggestions on how to get it all back together properly?

Thank very good.

Very useful - thx.

Excellent video

Thanks for the video just finished fixed the washer machine with same problem ❤🎉😊

GOD BLESS YOU FOR HELPING PEOPLE WITH YOUR KNOLAGE.

This helped me greatly, thanks for taking your time to show people properly. Most folks are scared to death to touch one.

Thanx for taking the tine to make this teaching video. If I would add anything, it would be a reassembly video. The fact that the 2 front pieces with the wiring are separate pieces caused me a little trouble during the reassembly. That way, you could add some points about how to handle the drum and tucking the padding in properly. However, it was still an excellent video and I am very grateful.