You don’t need to remove the headlight, just unplug the fuse box and swap it whilst its still mounted.
@organicvids3 күн бұрын
Never move wiring in an older vehicle unless its absolutely necessary. Search my chan for intermittent shorts.
@joe-uc2bx15 күн бұрын
This is the only vid on KZbin I've found that visually documents a stanley two tone... Very rare it seems, and yet worth even less than a standard no. 4! I found a Two Tone in my dads garage, he let me have it - the jappaning is completely shot and there's only a tiny smidgen of yellow left. You found a great example there.
@SS-dw4kcАй бұрын
I have a thin twin & need to replace the washer lid switch, the top to mine has plastic clips instead of metal & won't budge, any suggestions?
@jonmyers8046Ай бұрын
Kohler dropped the ball on that one. John Deere just sources it from them. I've had a few of them come apart like that. They had a different Bendix design on earlier ones that holds up more. Hope it worked out for you. 👍
@CodyKompАй бұрын
You used anymore wrong. talk about no brains
@AllTheBoostАй бұрын
Cleve off 😂 micrometer 😂 wtf. Last I checked using a Dremel to Cleve doesn’t work super well. It works much better as a grinder. As a mechanic I use a micrometer maybe twice a year. You bring it out for a rad cap 😂
@organicvidsАй бұрын
Well good for you. The point was the cap was manufactured to incorrect tolerances.
@fishwandaАй бұрын
I just want to get front panel off washer. Anyone know where I can find video
@organicvidsАй бұрын
@@fishwanda its in my channel
@fishwandaАй бұрын
@@organicvids it was my door switch. It came apart. Super glued it back together lol works great. I didn't need to go that deep
@leticiavelasco76782 ай бұрын
En espanol
@organicvids2 ай бұрын
Haaaa No hablo bien español
@LeumastapieroLeumastapiero2 ай бұрын
Precio
@ZimmZimmster2 ай бұрын
Thank you very much!
@organicvids2 ай бұрын
You're welcome!
@Zach35522 ай бұрын
My sister bought one for $100 recently. It’s green so maybe not true OG? We assembled it and learned the hard way that they don’t work so well in light white water 😏 aside from a few bruises, we recovered the boat and recovered everything we had in it!
@organicvids2 ай бұрын
Calm water these are great. I have the newer ones now. Miss my old one it was bigger but tuk wanted it.
@gregorysmith33022 ай бұрын
i just bought electric start system for my NorthStar 8000 walt generator 2003 with honda gx390 from eBay that works very well. my only problem is over charging 17.5 volts too high. it needs voltage regulator. not sure the one to get or how to hook it up?
@organicvids2 ай бұрын
Ive pretty much gave up on mine. Parts dep for northstar is not too terrible. Good luck.
@every_thing_wood12513 ай бұрын
How do i know if my engine is pre or post 2011?
@organicvids3 ай бұрын
Serial number
@every_thing_wood12513 ай бұрын
@@organicvids is there something specific I should be looking for? Or somewhere I can enter it and see?
The motor is humming. But not spin or drain?? What next
@organicvids3 ай бұрын
Check drain pump and door switch
@donluke9323 ай бұрын
Make sure that silicone is in Way better than explaining actually different installation problems idiot
@jakebriscoe91593 ай бұрын
Thanks for the video, I ran into the same issue trying to replace the assembly. I cam up with a different solution that seems to be working, at least for a few cooks so far. kzbin.info/www/bejne/f6G8n5Z7a9qmqdksi=U_OxZSVikkAPhdDU
@justinloos12863 ай бұрын
Where did you find the new board? Can’t find any on eBay
@organicvids3 ай бұрын
Good luck. Try used appliance stores that do repair
@OntarioMiner3 ай бұрын
Would this sensor have any relation to the transmission shifting into 4 gear on an automatic transmission? I have changed out the two spoed sensors on the top 01M automatic transmission with no fix to the issue. Vagcom speed sensor readings are accurate but then all the sudden drop from 65 km an hour to 40 km or 20 km an hour and never reads above 68 to 71 km an hour. Even if the car is traveling 80 km and hour. I'm thinking its mechanical transmission related issue.
@organicvids3 ай бұрын
Not sure, auto trans in mk4 in us never worked well.
@alteredgait9283 ай бұрын
Have model ei30bm60msb (vs msa), model, "b" is for badluck, can't even get past step 1.
@junkemails50504 ай бұрын
Id like to see how was made this hole for blow water out of the scoop. I can’t understand in my head. I want to do the same
@the_gold_canopy4 ай бұрын
Just went to replace the driver side HID bulb on my 2008 400h, and of course at this age she has the dreaded condensation issue along with the faded lexan. Did the Lexus bumper bulb limbo dance, pulled the light, popped the HID cover, and suddenly a whole quart of water poured out! 🤣 Pretty sure the ballast is fried. Time for replacement. 🔧
@organicvids4 ай бұрын
Set it in front of a fan. Ya might get lucky. Hair dryer?
@the_gold_canopy4 ай бұрын
@@organicvids I think she's beyond the hair dryer phase, especially with that much water sitting inside for who knows how long. Even if the ballast kicks on, the outside clear cover has so much oxidation, the passenger side isn't too bad because the previous owner replaced it, so i'm just gonna bite the bullet. And of course its the AFS type HID so unfortunately it's the most expensive headlight assembly. Saw a few remanufactured assemblies on Ebay for a few hundred and change.
@organicvids4 ай бұрын
@@the_gold_canopy headlight restore, hair dryer. No great loss to try. If you didnt blow fuse u may b lucky. kzbin.infocmWxoJLHvF8?si=wYy0PBfLwDYbp23d
@the_gold_canopy4 ай бұрын
@@organicvids I didn't check the fuse! 🤣🤣🤣🤣🤣 I should probably do that. The screws for the ballast cover underneath are rusted pretty bad, I need a good day to pop the headlight, throw it on the bench and see if it's worth the rebuild. But I didn't even think of checking the fuse. Appreciate it. 🔧
@tcdautomotive79814 ай бұрын
Thankyou for this! Saved my unit
@organicvids4 ай бұрын
Glad I could help!
@winterweston4495 ай бұрын
More information was very useful I just found you very rude
@organicvids5 ай бұрын
Really, sorry you misunderstand my frustration towards a product with major flaws. You need a course in desensitivity training. Haaa
@faraway30325 ай бұрын
Because you bought one tool dont mean they are all bad. Get 3 or 4 then make a review. Ive bought milwaukee tools and snap on tools that were defective out of the box, dont mean they are all junk.
@organicvids4 ай бұрын
Well rotten tomatoes haaa
@erikolmstead57705 ай бұрын
You get what you pay for
@organicvids5 ай бұрын
Not even. Haaa
@chimuelareyespimentel1005 ай бұрын
Que medidas tiene lá banda de secadora Whirlpool t
@lesleyavery71665 ай бұрын
Thanks for sharing there does seem to e a lot of problems I hope you got it sorted but I do wonder if you were sold the right kit for your motor type!!
@organicvids5 ай бұрын
There are 4 vids watch all four.
@Fnargl996 ай бұрын
Thanks
@bigdog0u816 ай бұрын
They sell that glow plug harness both ways like that and the full one.
@GavinMcnaughton6 ай бұрын
Glue it
@armandolopez89836 ай бұрын
Video so good I don't need to do it! THX!
@Anbc_ip6 ай бұрын
This was an absolute headache
@Anbc_ip6 ай бұрын
Sincerely Fuck you Toyota 😩😂
@lehsu6 ай бұрын
How many people does it take to change a light bulb? One, but you have to be careful and so tedious
@GrzegorzKorba6 ай бұрын
I was able to replace bulbs without disassembling whole lights and front bumper. For the left bulb you need to disassemble fuse box (just push the button in the middle and pull up), for the right bulb you need to disassemble windshield washer fluid filler. Just move these things to the side. There is not much space for manipulating stuff, but it's totally doable to open the lid, disconnect the cable and remove the bulb on both sides 🙂. Took me a while to figure it out, but after I knew how to do it, I was able to get there again in minutes.
@organicvids6 ай бұрын
I wpuld not mess with fuse box or move harness unless working on it. Intermittent shorts can occur in cracked wiring in loim from moving. Expensive fix i know.
@organicvids6 ай бұрын
@@GrzegorzKorba this is what happens when people disturb wiring harness kzbin.info/www/bejne/fKi5npdrp650pJIsi=zV0nZmJ55XV3EObI
@irritantno97 ай бұрын
Is battery temp an issue? I just got a code P0A27 and some discussions were that it is caused by blend door not working and battery overheating when ac off.
@organicvids7 ай бұрын
Blend door actuator is too weak to actuate two blend doors, bad design. And your ac charge is low and or batt cooling fan failure
@irritantno97 ай бұрын
@@organicvids blend door is closed and I observed no movement. I checked this after commenting last night. The fans are clearly working. Got a motorcraft actuator on order.
@irritantno97 ай бұрын
I wish I had seen your videos some months ago. I have three escape batteries and rebuilt one entirely. As the blend door actuator has begun to fail the rebuilt battery has become super erratic. After reading a forum post I turned on AC yesterday, cleared codes and car started working normally
@TheSmallEngineMechanic7 ай бұрын
greetings! I've never ran into one of these yet. but, I love a challenge. if you would like, I can see if I can locate a P/N and a source of supply? I would just need the model number and the first 5 of the S/N. Love the Chinification part. lol. Cheers!
@TheSmallEngineMechanic7 ай бұрын
@@organicvidsahhh, the model I fixed didn't have on installed. The P/N for the CO sensor is 290432064 Gardner out of Columbus OH was a supplier for them. I'm not sure if they still have them or if it would be a backordered part. Hope it helps!.
@organicvids7 ай бұрын
@@TheSmallEngineMechanic there is no output from gene without it hooked up, motor will run. I dont want to pull stator to bypass. Pita
@TheSmallEngineMechanic7 ай бұрын
@@organicvids no problem at all. Helping others is what I do. 👍
@TheSmallEngineMechanic7 ай бұрын
@@organicvids That is a stupid design. Who in their right mind would operate a generator indoors and even worse someone thought it would be a great idea to mount a co-detector on a generator. That's why I like my old school generators. I'm not sure if there are any electronic shops anymore that can check the PCB and circuits on it. I wish you good luck on this.
@organicvids7 ай бұрын
@@TheSmallEngineMechanic its always claimed in the US "its for your safety" this is how big corps screw the consumer or push out mom n pop competition. They make the product with some bullsheat that requires more maintinance, parts and labor then obsolete said parts or claim they are out of stock so you have to buy another pos. Planned obsenscense. I got a right mind to buy a new one n return this pos in the box just because they dont have the part. I have morals though. People dont buy these junky gene sets.
@organicvids7 ай бұрын
Update set flywheel magnet at beginning of ignition cycle. See other vids 2 through 4.
@twil71547 ай бұрын
Is the fog lights HID also?
@organicvids7 ай бұрын
No i upgraded to led
@MechanicClaude7 ай бұрын
My mass air flow is saying that I got 1275 mg/stroke mass air flow (actual) but the engine isn't running.. can you tell me what's going on. Unplug the mass air flow and it says 0 (actual)
@lpwork68097 ай бұрын
Any Toyota dealership they will replace it for $41
@cyclonealex27887 ай бұрын
I also have two Cyclones and one of them has a small piece of the magnet broken off. But it still plays without any problems
@organicvids7 ай бұрын
Mine sits dont wat to use it til i can figure out how to disassemble n fix
@ariannaarianna29547 ай бұрын
I’m not understanding how to bypass ? Where did you get the red cable from?
@wahidjavid517 ай бұрын
Same exact thing happened to my rx 400h last week while changing to d2s led auxito bulbs. The same spots cracked and it was done a a shop
@tylermann6507 ай бұрын
Doing my floors now. Ive got 2" bostich cleats, this thing has shot doubles every time for two full magazines of nails. Driving me NUTS
@organicvids7 ай бұрын
Rent a bostitch.
@tylermann6507 ай бұрын
@organicvids sacked up and bough6 a bostich from lowes yesterday morning. My hardwoodn flooring is done lol. I've cheaped out on a lot of harbor freight tools over the years, but have never seen as big a difference between the professional grade and HF version as this one 🤷🤷🤷🤷 maybe the quality control is garbage and some banks work and some don't right out of the box
@arjaybobadilla887 ай бұрын
How do you replace the tub support where the shocks are holding on to?
@StreetWraith5017 ай бұрын
Since you have an ALH mk4 would you know why the hand brake light flashes n beeps while driving but not while parked does it sound, yes I have oil in brake booster, the hand brake lines aren’t sagging but are touching correctly. It’s causing my car to be in limp mode tho and driving in 3 gear on D mode
@guyashby9838 ай бұрын
Awesome video. What a headache of a project. thank you for saving my sanity...