what I usually do is I try to make the parallel groups similar as possible mostly in terms of capacity so that they have same capacity roughly, and then I consider the brands also as possible after that. it seems to work fine for me

​@@OhadooElectronicsyou would also need to measure the internal resistance and each shouldnt deviate too much.

yeah someone else told me about that, right, I will pay attention to that in the future. thanks

yes it works, also works like a portable iron with a 100w powerbank, I only don't like I can't put it to sleep or turn it off manually without waiting for the time

the diagrams of each part or compenent in this project is easy to find on internet and then u put everything together but i think i ll make a video about this for everyone who asked about this

explanation : kzbin.info/www/bejne/p4HQgXWKoddkqJY

Nothing major, it's a great laptop and durable too I had it for more than a year now. thers is a bit of wabble in the screen but not bad it could be just mine, did you buy the gen2 or another generation coz they have some differences ?

@@OhadooElectronics Yeah it’s a gen 2 and it has 32gb ram and quadro t2000 graphics and a Core i7-9850H

ok great, it's a good laptop although it was probably better to check a newer generation to have a little bit future proof but then it depends on ur budget, anyway hope you get a good experience

@@OhadooElectronics thanks bro, the higher gens are either too expensive or the specs are too low so this one’s perfect. I used a 2018 MacBook Pro before this and it had less ram, a worse graphics card, and barley any windows support. So this one should be fine for CAD and Fortnite

I'm not so sure, I don't have this model with me now to see a way of fixing it but I assume you just have to get a new wire and replace yours but then you'll also need to disassamble the display unit in order to stick the other end and pass the wire through the hinge and so on

I think around 2200mah, but that ain't the aim of the video

not sure, coz I also just follod some post if I remember well

Maybe if you could check the pinout and internals of the relay of they're similar

just download the latest version now, it's integrated in it

@@OhadooElectronics I did but it wasnt and still didnt work but thankfully I found a loop and figured it out.

I think the terminal that is not - or + is for temperature, there should be some voltage there to indicate the value of temp to the device I'm guessing. and if you're measuring voltage on cells but not on the circuit then it's abviously something wrong with the bms circuit, you'll have to replace that or check the fuses or troubleshoot the other components if you have the know how

@@OhadooElectronics OK. Thanks for answering, but I still have a doubt if it's normal to present the 5v in the middle terminal or the correct one would be 7.4? as well as the other two. Thanks.

@@leonardotavares6672 I don't think so the BMS inside a battery I had says P+, P- & DQ for the 3 terminals and each terminal goes too different part of the circuit.

sorry, I was also check from an article and the subject was more about eagleCad

I have no other SW

The red light, you mean on the charger right? Ok I assume your charger is ok you can make sure using another battery if you have it, but most likely it's the battery, you'd wanna open it and check if it's only a broken connection then fix it or it might be the BMS circuit itself that has an issue in that case you can either troubleshoot that or give to someone who will or change it entirely with a known good one from an other battery and solder then put all together and try

the batteries will need to be replaced only if the battery is working and not holding a good amount of charge

@@OhadooElectronics I opened it up and looked. I charged the batteries manually. I measured the values ​​and they were normal. I think the bms circuit is broken as you said, it did not run the device. Thank you for your interest.

Hello. My charger (gkl 211) has no voltage when plugged in and still without the battery in it. Do you know if this also happens with your charger? It even turns on the first green light, but when measuring with the multimeter it has no voltage at the terminals. (empty/no battery)

@@leonardotavares6672 normally I think there should be some voltage on charger terminals (probably 8.4V) maybe you should open it and check there is a disconnection from terminal to rest of the circuit , since it lighting green

Hello, sorry I didn't see your comment till now. well for me it connects and I can ise it with lightburn with no issue. I'm not surr of I modified the firmware or not, maybe try checking that and look on their page there should be some guide on how to ise that not sure again, for me I'm using their SW so far and I'm still a beginner with this

Bro plz subscribe my channel and plz bhi mara channel ka name apni KZbin channel pr dikhao our discription box ma dal do

I'm moroccan , I don't understand what is you're saying

glad it does

sorry to keep u waiting, I'll send or I'll just make a video explaining that

That will be great. Thank you. Best regards

no idea

sorry, I will see if I still have it

I'm not sure, let me check and get back to you coz these are away now, give me a day or two

@@OhadooElectronics Good sir, I am waiting for your response

@@mun222270 the clamp meter is DT3266E the other one is a UNI-T UT83

I'll check that out

@@OhadooElectronics Hi, Have you checked that transmitter code! That Transmitter code also has 5-6 addresses while it should have only 1 adress as that of receiver... .... I've also subscribed your channel.

I still haven't checked since I have work and not much time, I'll let you know soon

I think what I did is just put 6 instances in there for future use, but it still would work just like that if I remember correctly (it's been a while hhh) have you tried it already?? also it 's good to have multiple ones so when you send the wrong cmd, nothing should happen on the receiver , just put everything together and test it, and let me know what issues u get

@@OhadooElectronics ok, I'll try this... Thanks

glad it helped

I think if you watch all the videos you can figure that out, or I can link an other channel's video that has more details

English !!

naah, I have built this project with no schematic but upon other requests I have put together those drawing I sent you, and I think they should be enough. I guess I probably should do a video and explain them

my Gmail is [email protected]

explanation : kzbin.info/www/bejne/p4HQgXWKoddkqJY

Sure thing, ASAP

Can you share in my Gmail?

@@fakhruddinazmi739 yes yes, it's just that I'm busy with work, just check ur email later this evening, bare in mind though it's not a detailed schematic it's just drawings I've done after project build

Ok thnks😊..

Thank you, yes I agree I've seen that too but in my case a piece of the glass where the connecter is, is broken so you would see digits cut off in the middle hence the only option is a new screen

@@OhadooElectronics Ah...darn it! Sorry to hear that. Good luck to you!

Yes it did

Check other videos

@@OhadooElectronics thank you

My plesure

for me I bought it locally here in Morocco at about 8$, online I'm not really sure, I found this one on Amazon, amzn.to/2ZGRYm3, and here is another on Aliexpress [ www.aliexpress.com/item/32885680105.html?spm=a2g0o.productlist.0.0.2e024595LE7yQz&algo_pvid=94f0eb05-dfa2-4bab-9aae-c09255f93438&algo_expid=94f0eb05-dfa2-4bab-9aae-c09255f93438-11&btsid=0ab50f4915906125645338547e6ea7&ws_ab_test=searchweb0_0,searchweb201602_,searchweb201603_ ] this seems to be cheaper

Hi there, well if u watched carefully it's clear I assume, I used female headers and soldered them to a piece of perfboard, also soldered to the module are some pins in order to insert it on top of that and also to connect it's output via wires to where the battery is connected, Tha's all. and yeah I think you could use hot glue however you want, if I remember I used some nails or screws on the wooden piece, I don't really remember. Ok there you go that sums up the whole video I guess.

I'm not sure I understood what you're saying but, at the date of video it definitely worked, I remember I installed a .9xx version but couldn't save the gCode so I opted for the .4xx and using the plugin as in the video and it works, u can also check other comments for people whom it worked for as well !!!!!!!!!!!!!!!!

@@OhadooElectronics yeah..... It worked

OS10.15 can't use the version under1.0 (the following is from Inkscape official) Note: There is no .dmg file for macOS for the current Inkscape version at this time. If you need a version from the 0.92 series (e.g. because you depend on third-party extensions that have not been updated in preparation for Inkscape 1.0, please use Inkscape 0.92.2 on macOS <= 10.14. Everyone else, starting from macOS 10.11, can use the latest beta version of Inkscape 1.0 or the development version. Catalina users must use one of these, earlier versions will not run on macOS 10.15. There will be a notarized and signed .dmg file for the upcoming Inkscape 1.0.

Thanks, we used some music but, 3ala khilaf hhh

maybe try using the code I have provided, have u done that, it's been a long time since that video

if u can't find the code let me know, I will check too, I mean the project was successful for me between a mega and a nano which is the same as the uno

hey, check the description of part 2 & 3 to get the code and if you still have problems let me know

Locally, here in morocco, I will look it up on aliexpress and send you the link

@@OhadooElectronics found it on Amazon, thank you!

I don't understand, can you use English

@@OhadooElectronics translate...

@@leanxds2097 you translate

@@OhadooElectronics no te necesito

check your email

my idea is that you don't need a 64bit version since that'll work on your machine, I don't see the problem right there.. elaborate please

You are right, I downloaded and it worked just fine, your tutorials have been a life saver! Thank you so much.

@@willievanderzwan8386 hey, I thought you know this, 32 and 64 bit both work on 64bit machine and OS, but 64bit will not work on a 32bit machine, man this basic stuff, anyway glad it helped

@@OhadooElectronics haha I can build and tune a mean engine, but when it comes to computers I'm still very much a novice!

@@willievanderzwan8386 OK gotcha, let me know if need anything else in this regard

Glad it was