Video answered my question of what the actual LEDs look like. Soldered to the board as expected. And now I know how to replace my motors if one ever fails.
@GeorgeToy-l4rКүн бұрын
Video was very helpful and thanks for repairing my dash cluster.
@jasonswift70985 күн бұрын
You're not explaining anything to us!!
@harrykuehnle13095 күн бұрын
I have a 2004 f150 have you ever heard of a bad cluster thats not letting my truck start I was told the cluster is bad. Does that have something to do with starting of the truck
@AutomotiveCircuitSolutions4 күн бұрын
If it is a 2004 F150 Heritage then yes the cluster stores the key information and can prevent the truck from starting. If your truck is a 2004 F150 New body style then it is likely not a cluster issue because these trucks can start and run without the cluster. That being said if the cluster is maybe bringing down the CANBus then I guess it would be possible. Easy way to determine if the cluster is the root cause would be to remove the cluster and attempt to start the truck.
@zamora60907 күн бұрын
? I have 2 codes that come out on my trailblazer ive tried cleaning the metal frame where the ground wire is scrwed on from the abs to the frame and i still get abs and parking light to turn on one is the c0265 and the other is c0291 which is park brake unlatch relay circuit do u think i get that code cuz the ebcm is bad ?
@bearhntr9289 күн бұрын
Amazing guide and super helpful. I want to replace the LEDs on my 2011 from green to white. There is another video floating around on doing this. My question is about the LCD in the middle. It is green, but is it really 'white' behind the green lexan? Maybe I could replace that with 'smoked' to make it white. The green is so hard to see in daylight (even fully bright).
@AutomotiveCircuitSolutions6 күн бұрын
The VFD display is indeed green. That is just the nature of a VFD display.
@bearhntr9285 күн бұрын
Thanks for explaining...wish there was some way to replace it...the green is just horrid. Shame there is no way to put a digital dash from 96-97 LTC in my 2011.
@richardgrossman641411 күн бұрын
Three bond 1215 or permatex ultra gray
@richardgrossman641411 күн бұрын
The two compound he used is thermal grease and gray silicone
@minaflash510718 күн бұрын
What was helpful 🙏
@busybeecleaningireland840520 күн бұрын
Why don't you use code from ECU information - variant code ?
@nathanzigloo246821 күн бұрын
How did you reset that module pls
@chinonyelumchukwuemeka517126 күн бұрын
Sorry my location is Nigeria
@chinonyelumchukwuemeka517126 күн бұрын
I need help I’ve Honda CR-V 2007 instrument panel cluster or flickering how do I remove it please?
@colemoore210827 күн бұрын
Instructions unclear, got nuts twisted in driveshaft.
@cuda409427 күн бұрын
Lol how did you repair it??
@mont804227 күн бұрын
Ya nice you showed excatly nothing
@BradJames87828 күн бұрын
I was hoping it wasn't this complicated. I would lose half the screws, and put the other half in the wrong spots. Then I would break the clips. I watched another video on soldering the resistors, and I don't do that kind of work. I guess I will never know how many miles I have on my car.
@roberth1723Ай бұрын
I used Automotive Circuit Solutions in March of 2024 to fix my 2004 F150 instrument cluster. They did a marvelous job! A great value - worth every penny of the incredibly reasonable price. I highly recommend their services! My first symptom was a brake light that never went out - was that way when I bought the truck, and local mechanics claimed this is a known issue with Fords that cannot be fixed. Then, my odometer started blinking out intermittently - the LCD display, not the backlight. Then I started to get phantom power lock operations (I would hear the power locks periodically locking with no action by me even though they were already locked). I found this video and read some comments - all these symptoms were linked to the instrument cluster! This video was also the best I found at showing how to properly remove the shift indicator cable. My instrument cluster works perfectly now.
@yasoutherncousinАй бұрын
With a used pcm does the model numbers need to match or just change the vin?
@average_consumer-nw3lnАй бұрын
I know this is old... can i remove it and 90% of car is normal just no airbags? I heard this is also the EDR event data recorder (Black Box). Id like to remove it. Care more about my privacy than my safety. do you have any info?
@buddycoombes4838Ай бұрын
You need to reset crash data first, if accident has occurred, then reset the BMC module. Then that will them clear that DTC. Ford kuga/escape.
@daburn2013Ай бұрын
Thank you brother. I changed my panel and it is great. Thanks for your help. Can't thank you enough
@GREATTECH1Ай бұрын
Loved the video...BUT the music is annoying as hell...
@stephenbrown664Ай бұрын
Hi I have a second generation 2006 JDM subaru forester. Everything works in my instrument cluster. But the trip meter will no reset physically. I does reset after disconnecting the negative battery terminal.. Do you have any suggestions? Thank you
@Cartoon_PhysicsАй бұрын
Remove cover, apply solder flux (or use flux core solder/ rosin core solder), flow extra solder down the pins to repair connections between layers of the boards, apply new thermal paste, apply gasket sealant, press cover back on, get to know Jesus.
@kidsytheАй бұрын
what was the actual repair? until we get that information fuck this guy
@dajeep2672Ай бұрын
Haha lift over the wire cut in exact same spot!
@4repeat473Ай бұрын
How do you fixed??
@user-gt9no6ph2dАй бұрын
What did you reseal the two pieces back with?
@futurepaver2039Ай бұрын
God bless KZbin! ❤
@Garagemonkey115752 ай бұрын
If odometer led screen fails can you replace it with another for 2007 ford f 250 superduty 6.0 diesel do not see for sale on internet led screen that is
@AutomotiveCircuitSolutionsАй бұрын
The odometer displays them selves do not fail. Blank screen is caused by defective components on the board.
@MiguelSilvaFX2 ай бұрын
great work.
@williammerrill91182 ай бұрын
When I do the self-test on my cluster break light does not come on can I fix that?
@AllanRamnanab2 ай бұрын
Adress
@user-yw1zp4ye9n2 ай бұрын
ح ها بصخ
@MarioTorres-ru6jl2 ай бұрын
can i use a regular snap on solus edge scanner to program it?
@MarioTorres-ru6jl2 ай бұрын
also my jeep is 2008 liberty
@sergiydolgov25242 ай бұрын
Please help! After remove SRS module my Ford Ecosport doesn't start. Looks like key fob not inside the car. But it is inside. Key battery is ok, its closed and opens by key. But not starter.by start engine button. Any advise?
@imbatman662 ай бұрын
Super video!
@6.0Lrique2 ай бұрын
Could this cause it to say tbc fault then turn on tow and haul and could that be the reason of my ac module to be off ?
@70eduar702 ай бұрын
If I take of the module can I still use my car normally until get the module reset I say ot because I will ship it to you
@AutomotiveCircuitSolutions2 ай бұрын
We don't recommend because of the obvious safety concern. But yes the car will run fine without it.
@XRPcop3 ай бұрын
I'm about to blow my neighbor's mind as she watches me pull the dash off with my hands to fix her cluster. 😂
@dennisgustafson44453 ай бұрын
What about the ribbon cable?
@elijuju273 ай бұрын
Were is the warning chime???
@frankmack75173 ай бұрын
Mine is 20 years old
@lynnettedowns15363 ай бұрын
where are you located my having the exact issue with my 2008 honda crv the dealer is asking a ridiculous price to repair/replace it. I'm in Los Angeles CA
@evanleonardomirandacruz60313 ай бұрын
Could you show us how to bench them? To test them outside the truck?
@StephenBates73 ай бұрын
Ford charges 800 in labor for this 😅
@cartailalexander98733 ай бұрын
Yesterday mine did that on the interstate freaked me out but did the hold button like you did and it changed back to normal but I'm taking the gauge cluster to be fixed.
@andrewduncan14073 ай бұрын
This is not programming this coding lol
@EmmanuelM.Garcia2 ай бұрын
Id love to find out more about finding the right equipment to reprogram Dodge, Jeep Chrysler vehicles. What do you know about reprogramming?