2003-2006 Ford Expedition Lincoln Navigator Fuse Box Internal Fuel Pump Relay Repair

[@michaelblosser5277]

Absolutely love your approach to this problem. Thank you for not ordering the $600 Fuse box to fix one relay. You give Mechanics hope that there are good people left in your industry!

[@joshstacy623]

I might to have to have this done. Getting ready to test the relay in a few. I saved the website you put in the description

[@woodrooowoodrooo1709]

Please let me know the outcome... I'm having issues as well with crank, no start.. Thanks

[@nate8895]

I performed this fix, and it was pretty easy if you have even minimal soldering experience

[@ACEV-zm5yb]

ONE OF THEE BEST DIY TUTORIALS IVE EVER SEEN..!! Love the music aswell. For real good job. I never comment on things but the awesomeness of this video made my day.

[@khalidkfy7368]

Excellent job

[@joediana5055]

And also what size tip is recommended to use for the desoldering tool.

[@joediana5055]

Hey have a question why type of soldering wire is that. 😊

[@jtr499]

I have a no crank situation on a 2004 Navigator. There is no continuity from the start relay load terminal to the starter solenoid. Could this be an internal issue with this user panel?

[@JHenry-tt5mp]

Thanks so much. Seriously awesome video. What was that solution you used at 5:10 to clean the board after soldering?

[@migueldeleon505]

Most likely a form or resin to help the solder, and/or isopropyl alcohol. But for sure he wiped it down with an alcohol wiper after.

[@omarsworld3227]

Question had my fuse box repaired locally and it’s starts now but my problem is I can’t get the truck to shut off Every thing says on and this wasn’t an issue befor the repair

[@carlwilson3723]

Something wasn't done correctly,they should have but a auxillary relay into the system,by doing this you don't have to remove the fuse box,check some of the other sites you will see what I am talking about.

[@migueldeleon505]

Have you ever gotten your issues fixed and if so what was it?

[@omarsworld3227]

Yes I figured it out. the work done to my fuse box was done correct the problem was that the previous owner or some one before me wired in a wire from the ignition switch to the fuel pump removed the wire and all is good

[@candiceburke9671]

Even IF I were to attempt this, how would I obtain the part?

[@AutomotiveCircuitSolutions]

www.automotivecircuitsolutions.com/products/meishuo-mad-s-112-c-power-relay?_pos=6&_sid=9acb02457&_ss=r

[@jedwardswalker]

Ohh my gohhh...and you put it all back together for us too...🫦