Hermano: justo entre el tambor y el sello de plástico…. Encontré un calzón atorado!!!!! Gracias Mil!!!!😅por tu contribución con este video

😊 nice

This tutorial has been so helpful, my only issue is I can't figure out how to get the dispenser out with the hoses attached to it. I cant find anything telling how to disconnect that hose yet.

Thanks....you saved me at least two hours.

Dude, did you almost fall? 😏

nice job thanks

Does anyone know how to reset the camera settings?

Great tutorial, insight appreciated!

thank you so much, found piece of cloth in there..

I had the same issue with my wash machine a year later so I came back to watch this tutorial and refresh my memory. Works great. Thanks again.

So you didn't show how to remove nuts?!

Piece of garbage. My battery went dead within the warranty period and their customer service tells me that the camera still works and wont warranty it. Stay away. This camera was 4 months old.

How to open the top cover that is the first step than you for your help

Thank you so much for the wonderful video; so simple and straight forward, it really solved my problem and saved me money....Thank You!!

Thanks for the video. I just had this happen and planning to tackle the blockage.

Thanks for showing a detailed rear view camera install

Thanks for the vid!!

When you first bought the 3W mats did you remove the original mats or you put it on top of them

I just fixed my F/ L kenmoore using your video. THANKS!!

Thanks...in an hour it was fix and running again!

You are the only person, who installed the rear camera...good job.

Thanks for sending me down the right path! Word of advice, though: before you start this task, try doing a quick spin & drain cycle. In my case, whatever may have been blocking the pipe when I started my load - most likely a previously lost sock living between the walls of the drum - was nowhere to be seen when I disassembled everything and took off the inlet hose. The original problem was certainly resolved. Instead, however, I now have a small leak inside the machine cabinet when I do a cycle. I think I'm going to have to take everything apart again and check the hose connections - but not today!

Ujjval!!!!! Your the man. Thank your for the advise my roommate broke the washer and thanks to your video I can now wash my clothes again.

I can’t thank you enough for this video. I have zero knowledge, skills or confidence when it comes to fixing anything. We had the same problem today and because of your video I was able to fix the problem. In pre quarantine times I probably would have ordered a new machine immediately. Your video saved me.

Did what you said and found a sock blocking the hose that drains into the drum. My wash machine is working. Thank you.

*Love the new washer➣>**allmy.tips/KenmoreTWasher?SS** Great washer for the price. Large capacity I wash queen size blankets no problem. HE detergent is recommended.*

Thanks OP and everyone commented below. I was thinking to find a repair guy as my dryer was stacked on the washer. However, someone commented that the sock may be able to be pulled from the gap between the gasket and the drum at 10 o'clock position. And bingo! I found the sock, removed it and fixed it within a minute.

Thanks for the post!!! Found the item blocking the hose right away and got the machine up and running again. Huge help!

Thank you

Thank you so much... Took me about an hour and a half but its fixed, sock stuck in the hose. Everyone doubted that i could do it.

Thank you so much! I am a frequent cleaner of the trap on the bottom, but never had any other problems before. As so many others said, I found a sock stuck at the hose. Again, thank you so much for the instructions.

This helped me immensely clear a blockage from my lower drain line, thanks so much!

Hi great video,BEFORE you take everything apart I used a plastic snake with the grabby points (what you use to pull hair out of a drain) and put it between the rubber and the drum on the upper left side and moved it around and it grabbed a pair of underwear. PROBLEM SOLVED. YAY!!!

Watched you video and pulled a sock out of the hose. Wouldn't have thought it possible but in the comments I see I am not the only one with this issue.

Very much appreciated -- did the trick!!

This stupid Canadian thanks you I by mistake put in my washer soap draw dissolved whiting OXY POWDER turned it on and flood god I'm idiot I know the pipe is plugged or screen BY CRAMMING IN THE WASHER TINY HUGE LITTLE PEOPLE WHO HAD SKIN NELLOW SKIN THAT MADE THE SOUND OF THE PEOPLE THAT GO NEEP NEEP like the one you found you had a hard time showing with the camera the lower hose. WHY CANT THEY BUILD THINGS THAT ARE IDIOYT PROFF GOD I HAD NO CLUE THE IDIOTS AT KENMORE WOULD PUT FILTER IN THAT WOULD PLUG 100% IF SOMEONE USED POWDER SOAP OR OXY POWDER. HEY WHAT A GREAT WAY TO MAKE HUGE CASH NON REPAIR CALLSPUT FILTER IN THAT WILL PLUG IF POWDER IS USED LIKE OXY WHITEING POWDER THANK YOU KENMORE FOR KNOWING BEFORE HAND WE WOULD DO THIS CAUSED HUGE FLOOD THAT CAUSED LARGE POOL WATER TO FORM THEN A HUGE FLASH OF GREEN PURPLE LIGHT BLINDING ME THEN THE ROOM STARTED TO SPIN AND THE LITTLE MOUSE PEOPLE STARTED TO SING THE SONG CALLED WOW IM HUNG HELL NO THAT ALL A DREAM THEN I WAS THROWN ACROSS THE ROOM THE GOLD FISH WAS SOME PISSED OFF KICKED ME IN THE JUNK THEN I WOKE UP THE GLOWING PURPLE WITH GREENS FANGED BOOGER BUGGIES.. OK WELL FORGET THE DRAMA ALL THE CRAP I JUST TYPED IN MY GOLD FISH MADE ME SAY IT . GOBBLE GOBBLE

Thanks for the video, definitely check between the gasket and the drum first, if its plugged there easy fix, no need to pull anything apart!!!

Nice Job! Checked hoses, no problem. Washcloth was stuck at the inlet to the tub as described. Used a pair of long needle nose pliers to carefully remove without damaging gasket. Thanks for the video.

You seem to love the sound of your own voice, you could of had this video done in half the time without all the drival and shaky camera work. Some may find it useful, but I couldn't stand it anymore and had to turn it off!

Just pulled a sock out of the lower end of my hose. Got a little bloody from my hand. Good video.

Thanks for the video--indeed we had a sock lodged at the lower end of the soap inlet hose. As described in other comments, I probably could have gotten to it from the space behind the gasket--rather than taking the top off, however it was a good learning experience.

Very good and thorough vid! Thank you! ( not too much yapping like some other diy vids!)

Thank you. Worked great.

same problem, same fix... awesome

Either the top or the bottom as for as the hose that brings water into the tub or drains water out will be clogged if you're leaking water check your hose at top of washer for water draining out of the detergent dispensary.check bottom drain for water drainage from the bottom of washer if bottom is leaking, just that simple.

Thank you so much!!! I searched and searched and found your post. I almost called a repair person. A pair of underwear was stuck at the bottom of the hose and water was spitting out of the detergent dispenser. I can usually fix most things thanks to posts on youtube and I had almost given up on this one. Once I got the top and front of the washer disassembled, I was able to unclamp the water hose from the detergent dispenser and pull the culprit right out. Great explanations, won't have to miss any work due to waiting for repair person and then double the trouble by having to pay someone for doing something so easily done myself. You rock! Thanks again:)

Big thanks to Ujjval and everyone else who posted comments! I didn't have to disassemble anything on my Kenmore washer but found a sock behind the drum gasket at the 10 o'clock position. Used a pair of pliers to pull it out of the hose and now the washer is working great again.

thank you for your help, saved me a lot of time and money. worked perfectly.

I wanted to echo all the other many comments. Sock stuck right where the detergent/water tube enters the drum. I still can't fathom how the heck it gets there even after reading many of the comments, but I'll know where to look for missing socks the next time! Poor dryer, it's been getting all the blame! My favorite part the whole thing is after removing the bottom panel (I did this in order to loosen the main front panel enough to ensure I was able to get the tube re-inserted into the drum properly) I find a "For Technician Only Diagnositic and Troubleshooting Guide" in a ziploc bag taped to the inside of the panel!!!!!! What a scam! Thank goodness for this series of tubes we call the Internet and great people who take the time to make these videos and inspire a bunch of people to save a ton of money and screw the system that hides information from its consumers in order to charge them hundreds of dollars for something that anybody with a ratchet set and the right torx bit can do.

Perfect, this did the trick. A big old sock stuck right inside after I pulled the hose out. My washer had been knocking for quite some time before it started leaking and I had to use medium spin otherwise the sound was unbearable on high setting. I couldn't figure out what the issue was but since the washer was working I figured I'd use it until she blew up or something. Sounds good now so apparently that was the issue. Make sure you pull the whole front panel off to make sure the hose fits back in correctly. Thanks for the video!