Жыл бұрын
6 жыл бұрын
Пікірлер
@tysoncarlson6778 Күн бұрын
Hello, have you ever fixed a fatal error, no program in rom error? I was doing a usb firmware update, it hung-up I turned it off and when I turned it back on that's the error I get. will not upload firmware from the card. what are my options? great video. thanks
@BMRStudio Күн бұрын
@@tysoncarlson6778 Hi! In the service manual, there is a procedure to get back the original firmware, the go and update. But there is not so much changes and improvements from the original. So… but You need be patient with updates, old rom chips aren’t fast. They are literally 20kb/s , and a MC firmware is about megabytes compressed. In flash ROM, about 32 MB.
@BMRStudio Күн бұрын
@@tysoncarlson6778 follow service notes page 21 update process, with SM card. To make the update. You cannot do with USB if the previous update failed.
@TysonCarlson-f8s 22 сағат бұрын
Thank you so much for your response. I’ve tried putting the firmware on a card and the only thing different about turning it on with the card in as opposed to without is that I seem to get the error 5-10 seconds later. Any other ideas?
@TysonCarlson-f8s 18 сағат бұрын
I’ve heard that formatting inside the mc909 is the way to do it for the boot file, I’m hoping someone can send me a full image of a card that’s been formatted within the 909, something about additional DCIM files or something. I’ve formatted in fat16 put the newest firmware on the card and it just seems to take a little longer for the error
@BMRStudio 16 сағат бұрын
@ nothing fancy about the format. Old school FAT. Partition wizard can do it for you. Free software. Then follow the procedure in the service manual. You need to create a folder called Roland, then copy the firmware files into it. Thats all.
@vidubium 6 күн бұрын
If you change the ports or pins just hit the enter button after clicking the up and down icon and after this just aply and safe the settings. As i said don´t forget to hit the ENTER button on your keyboard. 👍👍👍
@BMRStudio 6 күн бұрын
@@vidubium very old programming technique…. The data entry saving should be a part of ui control change event… Just saying. Bu thx! I learnt on the hard way 😂
@silence087 12 күн бұрын
I snagged the 150mm during the sale as well. Really pleased with it
@BMRStudio 12 күн бұрын
@@silence087 I think it’s a good value for the money. Plus the fractal function is a nice feature!
@bastienviallet2113 17 күн бұрын
How can i contact Paul ? Cheers
@BMRStudio 17 күн бұрын
@@bastienviallet2113 he has a KZbin channel, let me look for it…
@BMRStudio 16 күн бұрын
@pauls-audiolabor
@GovindeGowda-y6b Ай бұрын
Hi sir is product how much Indian rupees
@BMRStudio Ай бұрын
@@GovindeGowda-y6b ah, nowadays You can use a simple application with an USB measuring microphone. You don’t need this old technology anymore. I just love it
@kylembagley Ай бұрын
The best of these MC-909 teardowns I've seen yet! Thanks for this. Nice German club music also at the end ;)
@Habitual2000 Ай бұрын
Your tutorials really helped me to understand the 909. Great series, thanks 🤝
@BMRStudio Ай бұрын
Just 21 more episode is missing...
@Habitual2000 Ай бұрын
@ 😂. I will put on my Christmas list
@GeraldIrsigler 2 ай бұрын
Danke für die Info.
@BMRStudio 2 ай бұрын
@@GeraldIrsigler You are welcome!
@imsteampowered 2 ай бұрын
This is exactly what I was looking for. Thanks!
@BMRStudio 2 ай бұрын
@@imsteampowered Next week we will try to fix or destroy the wrong micro. IP 67 test too…
@piotrhummel 2 ай бұрын
Good stuff!
@kiosko33hz 3 ай бұрын
Hello and thanks for the very informative video. Quite a few people have come up with wonderful presets (free and not), but the king of vintage synthesizers presets is without a doubt @LFOstore.
@objectiveobserver2792 3 ай бұрын
Good to see this. Looking forward to more mc-909 content - lol
3 ай бұрын
Thank you so much! Have had this synth for ages and was sure it was damaged somehow. Only needed to change the battery to BR2032 and initialize the thing! :D Fantastic! Thanks again!
@godstruthwar7410 4 ай бұрын
Hey Brother, IMPECCABLE series on the 909 synth engine!!!!.... actually close to a 'MasterClass' for synth programming in general - in that you delve into how to **apply** it's architecture's functionality. Scratch-sample technique was a nice surprise. Would be curious on your take on any of these topics next time to jump into synth-tutes: 1. Effective part/channel setup on multi-timbral synths, what is best & where. 2. Strategies to get the most of limited FX engines (buses, parallel/series/sendto*) and FX contortion for live/jam use 3. PC<->Synth midi project management 4. Sampling workflow ( by way of: MC-909 input rec | PC input rec, pre-processing, keeping organized ) You have a gifted way of transmuting highly-technical, "boring AF" technical details into very in-depth, detailed & informative entertainment that is very unique. Your insights in creatively leveraging what's available is invaluable and have a magical spirit & good vibe. Hope the new spot is serving you well & thank you for taking the time to produce such quality content. Forums are plastered with negative comments on this unit and one must come to the conclusion that such types simply lack motivation to actually make their own tones - like someone complaining that a dull pencil sux when the sharpener is on the wall next to them.😎
@AnthonyFrancisJones 4 ай бұрын
Agree totally with you! DT100 lovely to wear but how did anyone EVER put up with them sounding so terrible!
@gixerags750 5 ай бұрын
Dude, WTF , I haven't had any notifications on your latest videos... I am so happy.
@BMRStudio 5 ай бұрын
@@gixerags750 ask KZbin what they did to my channel… Every week I’m getting negative views, so numbers going down 😂 Probably they don’t like My comments on other politic related videos… I can’t keep My mouth shut 😜 Glad to see You here! ❤️
@8uyhghggfcmjt 5 ай бұрын
Also. People some people write ✍️ or get information,, keep original,,, I’m astonished by the story of the synth. People who know more about music. 🎶 n beats yet. Have only just started giving lessons,,, ( bit like. Court room judges. But the you tube arm chair ones. Who think they rules ). Keep music your own way. ❤
@BMRStudio 5 ай бұрын
@@8uyhghggfcmjt well, all best musicians, DJ-s, producers, sound engineers who I know, all of them a non musician 😂 Only one of My friend, Dj. Tranzident (may You know him from , Gates of Mind - song) so he was a real musician with years and years in music school. This Gates of Mind song was Top 1 in the world for months! He used E-MU 1820 sound interface, Virus KB, Waldorf XTK, and some Roland or Korg arranger to make his world class hits! In his bedroom! Anyway, TR-606 isn’t the most loved beat grinder, but fun to use. Personally I hate it 😂 Paul has lot of small synths, I prefer big boys. I really like to watch when he tweaks those small pots, and switches. BTW we aren’t even in same music style. He is kind of Berlin Acid Techno guy. Me? Just a mechanic with hammer and welder… Who loves to make noise!
@8uyhghggfcmjt 5 ай бұрын
So you don’t do original 606 ?! I don’t get it
@josephharte4252 5 ай бұрын
Hi, I have been looking a some of your videos and I have to say you really know your stuff about carburettors, Do you have a video about where all the fuel and vacuum hoses go on a 2007 Bandit 650, I cannot remember where they fit back to, I should have marked them prior to taking them off, I would really appreciate any help in this regard, Thank you and regards, Joe.
@BMRStudio 5 ай бұрын
@@josephharte4252 i can send you the service manual…. Gimme some address @ = FockSpam
@BMRStudio 5 ай бұрын
On a fuel tap You mean, or on the carb?
@husamalden2897 6 ай бұрын
really great video! what amp do you recommend for the dt 880 600ohm Edition?
@BMRStudio 6 ай бұрын
My Monitor controller... Best headphone amp ever in My life! Check out My videos, MC424
@husamalden2897 6 ай бұрын
@@BMRStudio I didn't find the MC424 video Could you please send me the link?
@BMRStudio 6 ай бұрын
@@husamalden2897 624 sorry. kzbin.info/www/bejne/r2S0goiEgd-gfM0
@husamalden2897 6 ай бұрын
@@BMRStudio Thank you! It seems that this monitor controller cannot be found or shipped to my region. I'm considering the Lake People g103s, I'll use my Audient ID 14 mkii as a DAC with it.
@BMRStudio 6 ай бұрын
@@husamalden2897 you can have a look on the schematic, and build only the headphone section… just a tip. Believe Me, I never heard anything like this! So open, dynamic, loud, powerful, endless bass, crisp highs… Like a piece of diamond on a 50 lbs sledgehammer!
@CaseJams 6 ай бұрын
Dude I did watch the whole thing 😂 The hunting content is good. 👍 I think you have a real one. I did the same investigations this week for a Suntour suspension seatpost I bought for the e-bike this. Week 😅. Like you I think I got a real one as well. It’s either that or the fakes are so good now they should just enter the market with their own brands. Yours looks real.
@BMRStudio 6 ай бұрын
@@CaseJams I glad You did like it! Let me look up Your Suntour dafukk is that 😂 sounds like a special brand for something, what I never even known. I have only a normal bike. Hmm lets put the “normal” into quotes…
@CaseJams 6 ай бұрын
@@BMRStudio The video is by Norgman titled "HOW TO IDENTIFY AN UNSAFE FAKE COUNTERFEIT SUNTOUR SP12 SUSPENSION SEAT POST"
@BMRStudio 6 ай бұрын
@@CaseJamsJesus! I watched… Those fockers are copying everything, what the west develop with hard work. What a shitshow quality!
@That_Guy_In_The_Sky 6 ай бұрын
Have a 909 in my attic, cool video thanks.
@BMRStudio 6 ай бұрын
@@That_Guy_In_The_Sky get the dust off, clean it, and play with it! It’s a monster masterpiece!
@NiclasGudmundsson 6 ай бұрын
Hahaha, this is really strange.. When I postprocess I have the G53 as a standard instead of the clearance height. And I am not having my machine going down into the stock. That offset in the settings is scary, you can set it in both positive and negative.. I have crashed proximity sensors that way 🫣
@BMRStudio 6 ай бұрын
@@NiclasGudmundsson going down because of the 50 after write. If that field is zero, then everything is fine.
@NiclasGudmundsson 6 ай бұрын
@@BMRStudio Yes I did see that in the video. Very strange that it was 50mm as default. I did check it now on my new installation on my other computer. Its good you solved it at least.
@NiclasGudmundsson 6 ай бұрын
😂😂 i didn't take anything personal. And my intentions was not to roast you. I hope there is no hard feelings 😬
@BojanBojovic 6 ай бұрын
Thanks, I am thinking about getting this one or to buy the Pro Channel II. The only reason to get this is the de-esser, but as I can see it does not work very well especially because it is tied to the compressor. How useful or is compared to the dbx 286 de-esser?
@BMRStudio 6 ай бұрын
@@BojanBojovicI think the de-esser work very well on this gear. DBX 286 is far more noisy then the Voice Channel. Less dynamic range, and dbx is not transparent at all. Has its own typical Dbx smiley curve on low ends. But nowadays, You can replace all this analog gears with even stock plugins..if the application is not live. For live, there is a lot of decent intelligent interfaces for around 1000$ where You can load a damm good FPGA based 48bit algorithms, on a 24bit direct AD conversion line, for Your channel strip. So.. Yeah, technology is just running.
@BMRStudio 6 ай бұрын
www.thomann.de/intl/antelope_discrete_4_pro_synergy_core.htm
@matthewgreen8454 6 ай бұрын
I had the issue with G53 G0 Z0, and it dragged a carbide bit across a hardened vice jaw... When you create an NC program (8:07) there's an option on the right for Safe Retracts and Home Positioning. I there you can set Safe Retracts to Clearance Height, instead of G53.
@BMRStudio 6 ай бұрын
Thx! You are genius! I find an another solution, but in the next video I will show Yours too! I don’t understand why this isn’t a DEFAULT option…
@matthewgreen8454 6 ай бұрын
@@BMRStudio I've got two theories as to why this happened to us: 1. We've got our Z axis the wrong way up (in software) and positive Z should be downwards - If you look at 3:04 in your video the Blue arrow is up, should that be down? (Mine points up too) - you'll need to invert the axis in UCCNC as well. This is only the problem if it's causing the G53 to go the wrong way, which I'm kinda sceptical of, TBH. 2. I think this is the more likely one. No homing. The machine doesn't know where Z0 is, as G53 is based on machine coordinates, if they're not set by homing it'll head off in some random direction. I've since added home/limit switches to my machine, so I should be able to test if that's the case.
@BMRStudio 6 ай бұрын
@@matthewgreen8454 Nah :) Tomorrow You will see what caused the travel down.... Its just..... Wrong default settings in the default UCCNC installation. Not the switches, nor the setup, neither Me. Just one stupid data in a small box....
@NiclasGudmundsson 6 ай бұрын
I can set my sleep timer on the pendant to what you can set it to in the plugin, if I set 40 seconds it will go into sleepmode after 40 seconds.
@BMRStudio 6 ай бұрын
Whatever I set, no change. I have to do a customer claim 🤪
@NiclasGudmundsson 6 ай бұрын
Well, the G53 G0 Z0 should be at the top of your Z axis. So the G code will tell the machine to go max up to the Z0 start to move to the position and go down into the material. So either you turn the blue arrow in Fusion so that Z+ is going to be down instead of up. But that can be a bit dangerous and you might destroy some endmills. I use the free version of Fusiong too and it is working perfectly, yes you cannot use different tools in the same postprocess, but that is ok for me. So you need to change position of your Z axis sensor so that the machine is having G53 Z0 in the top instead.
@BMRStudio 6 ай бұрын
Its already set Z Home switch to DIR Positive. then I have an extra offset. I did find a way to modify the postprocessor and get rid of this line. This should be GO TO WORK ZERO PLUS Safe Z!! Not Machine Zero. Its just stupid.... So, Probably I have a issue around G53, G54 G55 G56 G57 G58 registers. Another video. Let You guys laugh on me and on Fusion
@NiclasGudmundsson 6 ай бұрын
@@BMRStudio But when you home Z is it going up or down from the machine board ?
@BMRStudio 6 ай бұрын
@@NiclasGudmundsson up
@BMRStudio 6 ай бұрын
@@NiclasGudmundsson I never seen any CAD program calling MACHINE ZERO on the beginning of the job. Never. Nowhere. Just stupid
@NiclasGudmundsson 6 ай бұрын
@@BMRStudiobut then I think you have something else that is wrong. So if you move Z down you are getting negative values (machine cordinates)?
@IONHowTo 6 ай бұрын
Oh wow that looks so complicated. I thought 3d printers are difficult to use but wow
@BMRStudio 6 ай бұрын
I make mistakes too.. So what You see, is not only the controller, software, computer, protocol, postprocessor, material, clamping, cutting speeds, cutting tool, working heights, currents, voltages, distances, tolerances, materials, dust collection, metrology, science, applied programming language, wearing, temperature... may I stop here.. meh... But human skills too :)
@NiclasGudmundsson 6 ай бұрын
It will Always zero Z axis first. Then X and last Y axis
@BMRStudio 6 ай бұрын
It set by this way of course. The issue is in the next video...
@NiclasGudmundsson 6 ай бұрын
you can get out of the problem with the limit switch, you need to hit the over Ride button. I did just like you before :D
@BMRStudio 6 ай бұрын
Next video..... Check out, for the issue. FUSION POSTPROCESSOR WRONG!
@Wilverine99 6 ай бұрын
Will these not work with a more modern digital stereo head? I only get a weird high end sound out of mine like it’s just coming from the horn. Any advice?
@BMRStudio 6 ай бұрын
I think I replied to You once. So again. You have crossover, coil or wiring issue. Bring it to some old speaker repair master!
@Wilverine99 6 ай бұрын
I have the mk2’s but it sounds like the audio is only coming from the horn. Am I hooking them up wrong? 😂😭
@BMRStudio 6 ай бұрын
@@Wilverine99 can be few things. Crossover, cable from the crossover to the woofer, contact terminals on the woofer, and busted woofer. Definitely need a service. Bring it to some good hand service guy.
@xyzspec82 6 ай бұрын
AXBB-E for the win! 🤓💥
@BMRStudio 6 ай бұрын
Until now, I agree! Fingers cross! Tomorrow I will do the first cut.... UCCNC has a kind a complex coordinate system, no sleep until I figure out!
@xyzspec82 6 ай бұрын
@@BMRStudio complex? Why? I find it very simple 🤔 Need help?
@BMRStudio 6 ай бұрын
@@xyzspec82 so, if you export G code from Fusion , free version, then the code G54 wants to crash the tool every time, regardless you did zero . Then, there is this Z height issue when You have home switch on the positive top Z. And, stupid Fusion just messing with datums, axis directions, machine simulations, and this nonsense bunch of offsets everywhere! With simple software, like Carbide, all right and ok. I have to learn more about Fusion madness, and how to avoid.
@xyzspec82 6 ай бұрын
@@BMRStudio did you choose the UCCNC post processor when exporting the gcode in Fusion360? I also have the Z homing like yours and It's all good. Fusion + UCCNC is really good for me Hope I could help.
@NiclasGudmundsson 6 ай бұрын
I have no problem at all with fusion360 with my machine.
@CaseJams 7 ай бұрын
Great progress. The new front panel is nice. I look forward to the video about the new PC on the weekend.
@BMRStudio 6 ай бұрын
Coming soon!
@WSQ-Ultrahard-tools 7 ай бұрын
The video is awesome! We are making PCD CNC inserts, do you need?
@BMRStudio 7 ай бұрын
hi! Thank You for the nice comment! Well, I can play with it, for sure! Any website? Info?
@WSQ-Ultrahard-tools 7 ай бұрын
@@BMRStudio Thanks for your reply! What model do you need? What material do you process? How many pieces do you need?
@BMRStudio 7 ай бұрын
@@WSQ-Ultrahard-tools Hardwood, soft wood, alu, plastic, polycarbonate. Stuffs like this. Give me a catalog website, i will choose, then You make me a price offer. Hcgberlin ,.,.,gmail.com
@WSQ-Ultrahard-tools 6 ай бұрын
@@BMRStudio I sent you an email, please check.
@Remixed_By_Mus-T 7 ай бұрын
the tube is definitely not a part of the the dynamic section thats incorrect information
@BMRStudio 7 ай бұрын
Nope. But the preamp.
@dadodado805 7 ай бұрын
Hi, interesting video Which headphones would you recommend for a Edrums, Neumann 20, Dt 1770, or Sony WH-1000XM5 ? Tnx
@BMRStudio 7 ай бұрын
DT 1770 is a best all rounder, Neumann 20 is a bit too stiff but has excellent mid-highs, absolutely studio headphone, Sony WH is not this class at all… kinda a MEH… E-drummers need something durable, easy to repair, easy to clean, cheap to replace, with excellent ear covers, isolation and good dynamic response at low,and highs. I saw many studios using old Beyers DT-770 M, AKG K 92 cheap closed, Beyer DT 150, Sennheiser HD 300 or 280 PRo… Keep in mind, drumming is a heavy, active, full body exercise with flying arms and lot of beer, and sweating 😂 Best if You export your drum session and go to listen in a shop. And buy a powerful headphone amp what can drive high impedance drivers! Behringer or ART will do the job… don’t spend millions of Dollars on it…
@olafjensen4508 7 ай бұрын
Great upload
@BMRStudio 7 ай бұрын
Thank you! Cheers!
@SwimTeamEPTX 7 ай бұрын
Im trying to remove the knobs so I can clean the plastic squares because some do not make contact. Do I need to pull harder on the plastic knobs to remove them?
@BMRStudio 7 ай бұрын
Means someone already broke them, and glued to the shafts… Yepp, pull it with a U shape flat lever, put some towel under the lever.. Those pots are replaceable, with Mouser Alps pots. Cheap.
@grabir01 7 ай бұрын
I had to install a glass fuel filter bowl to cure/trap, and keep my fuel clean to my carbs. My tank liner started to put super fine deposits into my fuel. Only the glass bowl cured this problem.
@BMRStudio 7 ай бұрын
I got a super luxury filter set from a friend, who has a Stihl shop and service. Since then, not so much problem with dirt. Only the stupid 10% ethanol is killing all rubber pipes, gaskets, whatever. So 100 octane only!
@grabir01 7 ай бұрын
@@BMRStudio A filter was not able to get it done for me. The particulate matter was so small if would pass through. I tried a ceramic filter but it would not allow enough flow but it did filter. The glass fuel filter bowl is doing the trick as the matter is heavier than fuel. I have emptied my fuel bowl 3 times now. It works!! Stens Filter Bowl Assembly 120-030. As for fuel, I use midgrade. It makes the most power for me. The stuff I use for fuel line is working well with ethanol10 percent or more as I am in Colorado and that is all we have. . As for fuel line, I use Silicone Tubing. No degradation at all. As new. Ethanol does not faze it.
@BMRStudio 8 ай бұрын
I know 😂 Cloned already… anyway, it’s not so important, I will keep only the files for people, who are looking for the original. In few weeks, the whole system get a new modern motion control and motors. Now we just playing with the router, to know the limits, precision and status of the mechanics. Thank You for watching!
@CaseJams 8 ай бұрын
XP pentium FTW! Love now set your drink can on the rare PC with the unkocked SW😅 Hopefully you took a HDD clone
@BMRStudio 7 ай бұрын
You can have it all :)
@FilmNicheMaking 8 ай бұрын
This was a very informative video thank you. I opened it up to clean all or most sections. I thought I could fix buttons F2 or or F4, but they don’t work. Do you know the part I need to source for it? I don’t use twin beam buttons. Do you think I could use those buttons and swap them? If you have any link please let me know. Thanks.
@BMRStudio 8 ай бұрын
I will check the service manual later today. I remember some seller on eBay, still up there, selling like a pack of switches in bag for MC 909. Kinda not standard height or something….
@BMRStudio 8 ай бұрын
Try DeOxi! If not working, can be a diode on this key matrix part.
@FilmNicheMaking 8 ай бұрын
@@BMRStudio btw, I used general circuit board Isopropyl Alcohol. I did your instructions about letting to button soak when pressing or recessing the button, to let it leak in. Interestingly enough, those exact two buttons F2 and F4 had mild “rust color” on the microscopic sides. It didn’t look terrible, but I could definitely see that some type of oxidation was specifically on those two buttons. You recommend I use DeOxi? How should I treat or approach the procedure again, the exact same way? Let’s assume those two buttons are shot and need to be replaced, then should just open up the rubber part and deep clean inside with a magnifier using DeOxi? I figured the worst case scenario is I can swap two buttons from the machine that i never use! For me F2 User and F4 Effects are priority over everything 💪🏼.
@FilmNicheMaking 8 ай бұрын
@@BMRStudio BRO!!!! I cleaned it thoroughly with Deoxit! The buttons work!!! You’re a genius. Thnk you so much man
@robinsutcliffe_video_art 8 ай бұрын
It looks like if you put another small signal diode - between the battery and the next resistor, this would prevent the charging of the battery. Something like a BAT42 for minimal voltage drop. This mod is often used by the vintage PC crowd, to use CR2032 instead of a rechargeable lithium for the BIOS settings. Thanks for the video.
@BMRStudio 8 ай бұрын
I think the best solution for this synthesizer, if You attach a 120Ah tractor battery to it…😂 I switched to Arturia Cz-V. Kinda 99.999999% same sound, so, soon this synth will go to a hibernation box.
@robinsutcliffe_video_art 8 ай бұрын
@@BMRStudio yes, there is that option.
@robinsutcliffe_video_art 8 ай бұрын
@@BMRStudio when you turn it on with the dead battery, does it already make the weird sounds of a corrupted ram info?
@BMRStudio 8 ай бұрын
@@robinsutcliffe_video_art yes. But you can do a factory reset.. my patches are saved on sysex collection by Midiquest
@robinsutcliffe_video_art 8 ай бұрын
@@BMRStudio thanks very much. I have seen one for sale with this issue, I think it is fixable then so I may get it.
@rawatrecordingstudiopati4849 8 ай бұрын
M audio dilta 1010 ic shot plz he8
@BMRStudio 8 ай бұрын
Eh.. you can find Delta 1010 on ebay for nothing.
@BMRStudio 8 ай бұрын
What’s the problem?
@avigdonable 8 ай бұрын
Tell us more about the secret device please? It’s been 9 years so far.
@BMRStudio 7 ай бұрын
Well, still on the way. Went a little bit off the rail. New idea, better PCB design, way better performance, Maybe I will finish the Master MTX in the next Year. If the market is wake up.
@CaseJams 8 ай бұрын
Epic video man! Thank you so much for posting! You do good for humanity here ❤
@BMRStudio 7 ай бұрын
This thing is soo big... Will make a lot of video. For sure!
@IONHowTo 8 ай бұрын
Oh man, when I see a notification from you, I know I'm watching it!
@BenButler1 8 ай бұрын
That is going to be a nice project!