I sure hope this works. I followed Epson's instructions when a printout was totally unreadable. I cleaned the heads three times, as instructed. The black was fine but colors looked like yours. I shut down for 12 hrs tried again but same results. Your video made the power cleaning so easy. Now I need to wait 12 hours and, hopefully, my results will be the same.

Thank you! For my Epson ET-2850 I was having only some missing BLACK in my print outs. The first head cleaning caused improvement in my BLACK nozzle check pattern but, weirdly enough, caused the worsening of the YELLOW nozzles. After 2 head cleanings, I ended up with perfect BLACK and YELLOW, but started to lose BIG CHUNKS of the nozzle check pattern for CYAN and MAGENTA in a large amount, like 35% of 50% of the pattern being white. Five head cleanings later and 1/8 of the tanks ink wasted, I've lost COMPLETELY CYAN and MAGENTA. Does anybody here know what the wasp could be going on in here? This is the first Eco Tank printer I own... I read somewhere that BEFORE trying a Power Cleaning, specially after one has done several regular cleanings, to check the condition of the Ink Waste Deposit. I think is in the back. Again, anybody has done that and can report back? I have also been printing "purge pages", for my needs, solid pure cyan and magenta, to no avail and I have as well waited 12 hours with no printing to see if the bubbles go away on their own but, no improvements. :/

mINE AFTER 3 MONTHS WOULD NOT PRINT ANY COLORS OR BLACK

EPSON ECO TANKS SUCK!!!!!!!!!!!!!!!!!!!

Thank you......

Thank you sir. The support from Epson is complete crap. I'm grateful that you made this video.

How do you disassemble it? My daughter forgot to put the filter in and I need to get beads out of the motor casing.

Thank you! Worked on my ET-2750.

The ET-1810 does NOT have a screen, how do we POWER clean in this case?

Merci beaucoup, cela à fonctionner pour mon imprimante epson ET-2756😁

You helped me more than the Epson support site. Now I can print color copy again. THANKYOU

After powering down, tried holding the question mark and power button but NO menu came up asking if I wanted to power clean!?!! Why?? I can't run a power clean if never given the option from the printer menu. Ughhhhhhh

Any idea how to replace items for this type of first aid kit as i have the same kit but with my family the kit ended up getting half empty with in a year, been trying to find replacement supplies for it but know idea where to find the supplies for it?

Thank you sir! My printer had been sitting for a while.. This worked like a charm!

Epson 2780 here. Tried it and it never went into Power Clean mode. Tried every video on Power Clean and think this printer has a flaw that it cannot power clean. I'm tired of waiting 12 hours every day. Never again will i buy an epson

Thank a lot!

The lines were all clean after multiple cleanings but it still is not printing all the colors. My black tank is full and the colors are 1/2 full. Any ideas?

Excellent! Would never have figured this out on my own! Thank you 😊

Instruction starts at 2:35.

I am worried about doing a power clean on my Epson ET-2700 as the ink does not seem to be refilling. I believe power cleaning uses up a lot of ink, and if tanks are not full I may damage printer.

This totally fixed my issue !

Thank you! Mine says it will be ready to print after 12 hours? I tried it any way and it worked!

It worked! I didn't know what to do! Thank you so much!

Vielen Dank für Deine Erklärung und herzliche Grüße aus Bayern !

After 2 regular cleaning and 2 power cleaning, still not fix issue

Thanks for this.

thanks. very helpful

Why doesn't it perform "POWER" cleaning all the time? Why have a separate "Weak" cleaning and "POWER" cleaning? 😆😆

Thank you so much!!

Do i do anything other thab hit the button and let it go? Where does the ink go if it says its pushing the ink out and to make sure to have atleast 30%?

Succinct and helpful, ty good sir.

i have always wondered how to access the power cleaning mode! thanks

Thanks for vid was helpful

Solved my issue but I am concerned about long term maintenance. These power cleanings shorten the life of your printer. Once the reserve tank is full then what?

Thank you

Power cleaning actually recharges the tubing to the print nozzles like a 1st time install. It is very important to do a power cleaning if you have used a nozzle cleaning kit and nozzle check still shows voids.

I just did this, and before I did, the printer stated that I had to replace the Maintenance Box which collects waste ink. My tank was almost full. You should also have over one third in the ink tanks so you don’t run dry.

It did the trick, thanks a million!

So simple, clear, and kind. Thank you!

Thanks so much!

😢you are a life saver .thank you

Awesome thank you!

This was brilliant... I too had done all the cleaning, nozzle checks and really didn't have the stamina to face Epson's instructions... I couldn't believe how easy it was and it worked! Thank you SO much!

Does it take a lot of ink to do power cleaning

Worked like a charm. You're right. The instructions in the manual and online are terrible.

I just don’t understand why Epson (& a lot of uTube fix-it people make this so complicated, when it’s basically just 3 steps: Power off; hold down the 2 buttons & hit ok. Yours was by far the quickest/easiest explanation! Thanks.

Thank you so much

I just did it, one question where did all the Ink go. Do I need to empty something

OMG - LIFE Saving!! Thank you SOO much!

Thank you so much!!