How to install gyprock plasterboard
12:39
Installing roof trusses
19:37
5 жыл бұрын
Demo of how to chisel wood
13:03
5 жыл бұрын
Installing our steel kit home frame
8:08
Пікірлер
@colorin81colorado
@colorin81colorado 2 ай бұрын
Although i can appreciate your work and the time laps rhr whole video did not give me an OZ of direction on who to download t right...
@OleGunner99
@OleGunner99 3 ай бұрын
Hi there, if you screw on your starter strip to the metal studs before the building paper/insulation goes on then it will be as straight as your bottom plate. You can also easily flick some chalk lines onto the studs to get the tight height. When you put the builders paper on have it overhang the starter strip by 20mm and then tape the paper to the starter strip. Question... are there slots in the j track? Just wondering about water e gress
@StevenCampbell1955
@StevenCampbell1955 3 ай бұрын
I left as soon as she said Gyprock for eaves.
@kevinbritton3067
@kevinbritton3067 9 ай бұрын
Good stuff
@brandon1351
@brandon1351 11 ай бұрын
And after 4 years of no activity, the marriage and family unit collpased and now living in 1 bedroom apartment.
@ClearlyHinze
@ClearlyHinze Жыл бұрын
Hi, what kit home company is yours from? Thank you for the videos.
@guzzoofoz
@guzzoofoz 2 жыл бұрын
I’ve been watching through your videos as my wife and I are hoping to do the same with Paal Kit Homes. So I need to thank you both for your help and mistakes. Very inspiring. I hope you are still enjoying your achievements. 🙏🇦🇺
@flinch622
@flinch622 2 жыл бұрын
A question: should steel framing get moisture barrier applied before insulating [as is commonly done in wood construction]? It's very important to help moisture ingress fail to the outside. I also worry about shear strength [wind/earthquake resistance] if outer walls are not clad first, be it osb or whatever.
@TheKnobCalledTone.
@TheKnobCalledTone. 2 жыл бұрын
It's been a couple of years... how's the house going?
@edwinchen1785
@edwinchen1785 2 жыл бұрын
Thanks for sharing, can I use nailer to install the doors on the steel frame structure?
@warrenjames1962
@warrenjames1962 2 жыл бұрын
Have enjoyed watching your build process! had a few laughs as well! How long has it taken you to build?
@johnpacella9519
@johnpacella9519 3 жыл бұрын
This is hilarious. You are building a house, DIY style, yet you installed a window “upside down”. I shudder to think about the final, structural condition of the structure. Future buyer beware!
@acton_creek_farm920
@acton_creek_farm920 3 жыл бұрын
How long did it take you guys to clad…..??
@denisfajkovic5672
@denisfajkovic5672 3 жыл бұрын
Hey guys well done what screws are you guys using?
@bunyipz2040
@bunyipz2040 3 жыл бұрын
good video, I'll have to check out the others (if any) and hopefully your still as happy.
@danieIlondon
@danieIlondon 3 жыл бұрын
Hi, is this in addition to something like k12?
@jameslovering9158
@jameslovering9158 3 жыл бұрын
Router ?
@acton_creek_farm920
@acton_creek_farm920 3 жыл бұрын
What happened to your window install video guys???
@Nadsicles
@Nadsicles 3 жыл бұрын
I am about to do this to my house. Thanks for the vid! Quick question, why tuck the top flashing in? My manufacturer (not PAAL), said to tuck it all in under the insulation. Just wondering if you could enlighten me. Thanks
@Martin_Gregory
@Martin_Gregory 3 жыл бұрын
What were those blocks of wood attached to the plaster? How were they attached, what were they for, how do they get unattached? Thanks!
@johncole2744
@johncole2744 3 жыл бұрын
Would this world in cold, wet climates? Im up north.
@loafandjug321
@loafandjug321 4 жыл бұрын
You can't be cereal.
@lukewallace3097
@lukewallace3097 4 жыл бұрын
Was this entire exterior frame assembled in 1 day?
@hafzamacie8858
@hafzamacie8858 4 жыл бұрын
There are many similar projects in Stodoys plans's plans.
@yessiryousir
@yessiryousir 4 жыл бұрын
These are great vids mate, really helpful. Awesome job!
@daikiryoku
@daikiryoku 4 жыл бұрын
Any updates?
@foxnews114
@foxnews114 4 жыл бұрын
Hey Matt What will you do under the first row?
@TheHousethatMattBuilt
@TheHousethatMattBuilt 4 жыл бұрын
Hey mate! We are going to trim the damp course (the black plastic roll) and the termite protection (the blue plastic roll) and then leave as is. Eventually, we'll put a ground deck in to meet the house so the transition will line up with the slab. We've seen other ideas - garden beds, steps, ect - but we're going with a deck that joins the alfresco slab and finishes that outside area.
@rowankaren8363
@rowankaren8363 4 жыл бұрын
What happened tothe updates? !! Was enjoying the videos
@acton_creek_farm920
@acton_creek_farm920 4 жыл бұрын
Hey guys...did you try to make all your joints on a stud or can they just be anywhere?? Ta...
@TheHousethatMattBuilt
@TheHousethatMattBuilt 4 жыл бұрын
Hey! The cladding we used (primeline summit) doesn't need to join on a stud. But others may need to depending on style 👍
@r1yamahamini
@r1yamahamini 5 жыл бұрын
Love these easy to follow videos:) I'm buying land in NSW in one month to owner build and will be doing everything by myself. (I hope I can find someone to sign off on my electrical and plumbing)...
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Thanks! Glad you're finding them useful :) V exciting starting your owner build in a month! Will your council need to see your plans?
@r1yamahamini
@r1yamahamini 5 жыл бұрын
@@TheHousethatMattBuilt .... I'm going to use The ShedCompanys kit called Country Estate, they have guarantied council approval for their plans:). I haven't found land I like yet, there's always some problem like too expensive,too small,dodgy neighborhood or no internet.
@121edinoz
@121edinoz 5 жыл бұрын
Again great video, Storm. The captions certainly made it easier to follow. Glad I managed to assist!!! One more big job down. Well done Matt....no wildlife there.
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Eaves, they're necessary but oh so time-consuming to install. Save your sanity, get a sheet lifter!
@lloyddodds8842
@lloyddodds8842 5 жыл бұрын
Just a question...aren’t you meant to do ceiling before wall? Or doesn’t it matter? We’re in final stages in preparing to build Paal ‘Derwent’....
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Hi! Congrats on being in the final stages 👌😊 so far, we've found that it doesn't matter 🤷‍♀️
@lloyddodds8842
@lloyddodds8842 5 жыл бұрын
Kool...ta…and loving your build by the way👍👍
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
@@lloyddodds8842 thanks!! 😁
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
We made a rookie error in measuring the length of the top sheet - we forgot to allow for the plasterboard that was already up on the perpendicular wall. Easy fix though, so NOBODY PANIC! ;)
@daikiryoku
@daikiryoku 5 жыл бұрын
Buy a collated screw gun for the plasterboard, it will save you so much time.
@daikiryoku
@daikiryoku 5 жыл бұрын
You should do the gyprocking before the door jams, that way you can hang the gyrock and cut off the excess. With the jams in place you will have to measure and cut all the gyprock perfectly.
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
That's a good point. We didn't consider this and have just continued with the measuring and cutting of the gyprock. We're almost finished with the gyprock, haha!
@daikiryoku
@daikiryoku 5 жыл бұрын
@@TheHousethatMattBuilt Never mind, progress is still progress!
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
@@daikiryoku So we went ahead and checked our construction manual after your comment - just to confirm what the order should be according to Paal - and we were following the book in the end. They recommend door jams go in first before gyprock 👌
@acton_creek_farm920
@acton_creek_farm920 4 жыл бұрын
@@TheHousethatMattBuilt I'd agree with you guys...if you put the gyprock in first you wouldn't be able to fix the rivets in the steel frame without scuffing up the plaster...
@daikiryoku
@daikiryoku 5 жыл бұрын
You need a laser level and tripod, save you all that measuring and levelling. They are helpful for tiling, too.
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Yes, top tip! We are starting tiling in the near future so will def see if our current laser level is up to the job!
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
All up we had about 16 doors that we needed to install. We are also considering adding a barn door to our kitchen pantry - that video is a while away but we'll add it to our playlist and add a link when we're done :)
@LizParker121
@LizParker121 5 жыл бұрын
Great video Storm. So proud of what you and Matt have achieved. Oh and your awesome friends. Xx
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Wouldn't be anywhere in this project without friends or family! x
@mattmcmanus2401
@mattmcmanus2401 5 жыл бұрын
Need to get some PPE for the kids!
@121edinoz
@121edinoz 5 жыл бұрын
Saved by a very determined daughter. Aren't they all. Well done on a great job, making it look pretty easy to the novice.
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Cladding is time consuming and fiddly - but worth the cost saving if you've got the time and patience and some mates who are happy to lend a hand!
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Don't mind the screaming of children or barking of dogs in the background ;) also, top points to people who watch to find Matt use the word "handy-dandy" during his how-to explanation :)
@ggpp4898
@ggpp4898 5 жыл бұрын
Nasty wee moment there at the end.....all came right though, very well done!
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Can you imagine if we had take the rolls down and start again!! Glad it was just a tiny fix in the end :)
@ggpp4898
@ggpp4898 5 жыл бұрын
@@TheHousethatMattBuilt There would be one or two small expletives I'm sure!
@LizParker121
@LizParker121 5 жыл бұрын
Amazing work guys
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Wait till you see the cladding go up 😉😊
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Super quick time-lapse video showing us wrap the front of the house. This was an easy and enjoyable job and one that made such a difference to the feel of the house! Went from a steel structure on a slab to almost a house! ;)
@benlangley1763
@benlangley1763 5 жыл бұрын
Is this the Elizabeth and you’ve modified it? Do you have R2 wall insulation? Videos are great guys, keep them coming.
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Hey Ben :) This is a modified Tasman actually. Similar internal floor plan layout to the Elizabeth but slightly smaller. We've widened the front verandah to help with cooling. We've made the master room bigger. And we've flipped the rooms - so the master is on the RHS and the other rooms on the LHS now. I think we also modified the kitchen and gave ourselves a bigger walk in pantry. Yep, R2 wall insulation and R4 for the ceilings. Thanks for the feedback and glad the videos are useful. Are you owner building too?
@benlangley1763
@benlangley1763 5 жыл бұрын
The House that Matt Built My wife and I will be starting an Elizabeth build by the end of the year (hopefully) so we will be watching your build closely 🙂
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
@@benlangley1763 that's super exciting! Hope all goes well with the plans etc. We're hoping to be in our finished house by end of the year! 🤞😊
@metinokur997
@metinokur997 5 жыл бұрын
Where's ya termite install?
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
@@metinokur997 we have slab protection - went in as the slab was curing. We'll also get another treatment before we get occupancy certificate 👌
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
This video is super sped up so you can see the progress quickly! Any specific questions, just pop them below 👌😁
@ggpp4898
@ggpp4898 5 жыл бұрын
And 'chuffed' you should be....excellent efforts. BTW was that Ed sent off site at 2:06 to get his hi vis kit?....and quite right too!
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
Thanks! It was tough going! Glad to have seen the back of it now ;) and good spying! But no, GP came to visit that day and helped with some verandah wood burning work that we didn't get on film.
@TheHousethatMattBuilt
@TheHousethatMattBuilt 5 жыл бұрын
This is the first day of five that it took to finish putting up the roof entirely!