im trying familiarize myself with stspin32f0 and st's "motor controler workbench" for setting up most of the firmware, whats your opinion?
@freedom20006 күн бұрын
I don't know this!
@Mamiri1379Ай бұрын
Thank you very much for the video, but can you explain why you heated the bottle before the operation? What effect does this have?
@freedom2000Ай бұрын
Bottle is pressurized then heated to remove carvings
@tarpduryАй бұрын
Hello i have a question about this . what is your email
@freedom2000Ай бұрын
Please ask your question on hackaday 's project (link in the description)
@hoan87vnuАй бұрын
Can you share android app for this?
@hocinebaguiАй бұрын
Ze french accent
@WHMAGuy2 ай бұрын
I love this. Exactly what I was looking for.
@freedom20002 ай бұрын
Great ! But read carefully, it's not exactly a stepper although it is controlled as a stepper
@WHMAGuy2 ай бұрын
@@freedom2000 yes I have a specific high torque linear DC motor that i need a medium level of position accuracy and this looks like it will do the trick. If not it will be a fun project anyway
@freedom20002 ай бұрын
@@WHMAGuy yes it should work fine for this application.
@Dancopymus2 ай бұрын
Hello! And the arduino code, is it possible to share? Thanks.
@herveravat53792 ай бұрын
Ou est la selle ?
@freedom20002 ай бұрын
Ailleurs 😂
@rckeith2 ай бұрын
Nice work. There is an update to grblHotwire so you can alter the wire temperature and feed rate while the job is running.
@ebikefe2 ай бұрын
Interesting design - which part is hooked to plane? That "hook" appears to connect with the bungee cord - how / what pulls the plane?
@freedom20002 ай бұрын
Yes that hook connects to the bungee cord. Another cord fixed to the first one connects to the plane.
@willikielholz79442 ай бұрын
Dear all, Can you maybe give more details for connecting a FrSky RX with the Sbus for the Servo informatin and the telemetrie input by the S-Port ? Have you maybe also stady, to use the GY-86 sensor ? It is with the gyro sensor. Kind regards Willi
@chinook71653 ай бұрын
Nice place. Nice video.
@Izlolz3 ай бұрын
DealExtreme !! C'était la belle époque
@Izlolz3 ай бұрын
Enorme, félicitation pour cette magnifique réalisation. J'avais commencé un projet similaire pendant le covid (voir mes vidéos), mais je ne l'ai pas abouti contrairement à toi
@fuzzykv4 ай бұрын
Do they have any bearings between the upper and lower boards on which it slides?
@freedom20004 ай бұрын
Yes it's a "lazy Suzan" circular ball bearings
@zachfighter605lpabwalsh24 ай бұрын
My left ear enjoyed this video
@awo6654 ай бұрын
What is the cost (more or less) for 9 PCBs and shippment to France?
@freedom20004 ай бұрын
I still a few available. Please send me a mail freedom2000 at free.fr Or simply order them on PCBWay following the "shared project link" into my hackaday project
@Dj.alk134 ай бұрын
Mais merci pour la vidéo
@Dj.alk134 ай бұрын
Hé le français on t as reconnu
@sareythun695 ай бұрын
how much for drill hole extruder ?
@freedom20005 ай бұрын
Please read the description and follow the hackaday's link
@rahatkhan9486 ай бұрын
Can i control HD108 RGB LEDs strip using ESP32 with ARDUINO SPI Library? Can you please provide me some tips?
@freedom20006 ай бұрын
Read all the comments. Code is below (for esp8266)
@electronik8086 ай бұрын
hi the hackaday page is down :-(
@freedom20006 ай бұрын
Yep it seems that the whole hackaday's site is down
@rvg5576 ай бұрын
très bon choix musical ! un petit filtre ND ou polarisant aurait été parfait ;)
@freedom20006 ай бұрын
Un filtre ND aurait été sans aucun intérêt... Pourquoi traiter du flou de mouvement sur une cascade déjà naturellement floue ? Quant au dire polarisant oui mais juste sur la partie "mer" !
@rvg5576 ай бұрын
@@freedom2000 pour la flotte !!
@freedom20006 ай бұрын
@@rvg557le polarisant n'agit que sur des surfaces réfléchissantes (lac, mer calme, toiture, etc...). Ça ne marcherait pas sur une cascade...
@havehalkow6 ай бұрын
If I may ask, how did you fit the magnet inside or how did you attach it to the motor shaft?
@freedom20006 ай бұрын
Please look at the hackaday's project. Link is in the description. Magnet is epoxy glued on the shaft
@havehalkow6 ай бұрын
@@freedom2000 Now I see, thank you :)
@Kevin.L_6 ай бұрын
Impressive. I like the design.
@freedom20006 ай бұрын
It's a simple design !
@Kevin.L_6 ай бұрын
@@freedom2000I was looking for a 3d design to print when I found this. A friend just got his laser cutter and he is going to try this for me. Thanks for sharing.
@freedom20006 ай бұрын
@@Kevin.L_ carefully follow the assembly guide(pdf) and you will be surprised how well it works !
@Kevin.L_6 ай бұрын
@@freedom2000Thanks for the advice. I'll let you know if I get it built.
@chinook71657 ай бұрын
Hello. Is it difficult to monitor the temperature in order to have a good surface quality ?
@freedom20007 ай бұрын
Well... It's a trial and error process. You have to control voltage and current. And if course a constant speed. So basically one settings for one type of foam and one feedrate
@slightlywetbaby8307 ай бұрын
Bravo!
@daviddavidson13727 ай бұрын
does anyone offer this dish aready made??? would love to build this..
@jennifer.lee.7 ай бұрын
I get that there are videos out there that show how to sharpen a knife but if you don't show that you're actually sharpening your knives in this video it makes me wonder if it really works or not. It seems like it would work pretty well, but there's no proof.
@freedom20007 ай бұрын
Hi, Yes you are right, there is no evidence that it works ! However any knife sharpener with fine grid diamond stones a fixed angle and no backlash will work... I didn't want to bore people with these long and annoying videos where you see the author sharpening a knife ! The most important for me is to show how it works (no backlash, almost 360° rotation, knife fixure, rotation of the knife, tuning of the angle...). Sharpening process is easily reproducible ! So trust me it works and it works really well !
@hadriano75987 ай бұрын
@@freedom2000 :) :)
@obregr8 ай бұрын
How much di you unflate tyres,and so you thin hot gun for electronics will work(aprox 650W)
@freedom20006 ай бұрын
You don't have to put too much pressure. 1 to 2 bar is enough. And yes a 650W hot gun should work (but will take longer)
@dr.adityaguptadentist17998 ай бұрын
So beautiful so elegant Just looking like a wow
@iaincampbell44228 ай бұрын
Would it be possible to paint it with something reflective, or coat it in something reflective and mount a receiver to get this thing actually working You've dome most of the hardest work. Appreciate this version might be too small...but you wouldnt need to enlarge it too much before it might work i suspect!
@freedom20006 ай бұрын
No the antenna is way too small ! To capture s band or x band satellites you will need at least 3m antennas. And if you want very strong reception then 8 to 10m will be perfect !
@chinook71658 ай бұрын
Nice and efficient launcher !
@fenetre967 ай бұрын
true
@Jim_One-wl4ke8 ай бұрын
Wow a very neat and well setup Big Servo project. ❤Thanks for sharing
@PartsTreeC8 ай бұрын
This is much more compact than the sawsall reciprocating saw version I made 🤣
@jelivanlolz11878 ай бұрын
Ohhh i didnt know simple foc had increasing torque
@BernardBartoli9 ай бұрын
elle a de la gueule ,si non pour l'arreter le systeme normal ,c'est quoi?
@freedom20009 ай бұрын
Faut la coucher sur le côté gauche. Ça noie le carburateur et elle s'arrête. Véridique, c'est dans la notice de l'époque !
@潘冠冠-g4u9 ай бұрын
can it used on other hotas? i m looking for this for a long time
@freedom20009 ай бұрын
I would say yes. But probably a few modifications to do into the code.... I don't have other hotas to test unfortunately
@JoseEstevez-gw8zo9 ай бұрын
Très fiable mais attention à l'allumage 😉.
@luigicirelli258310 ай бұрын
è veramente ben fatto it's truly well manufactured
@ILiveWithStories10 ай бұрын
can you tell me the thickness of the strip and the heat value you used to roll it, please?
@freedom200010 ай бұрын
8.5.mm see here : hackaday.io/project/185196/log/205725-using-the-bottle-cutter
@AtlantisRouTou10 ай бұрын
Too much of anal haemorrhoids
@dankwantw10 ай бұрын
hi, I had bought one Joystick2PPM board V1 from you some years ago. May I buy one ESP32 Joystick2PPM board V2 pcb or board again? Thanks
@freedom200010 ай бұрын
Hi, Yes sure it could be possible ! Please tell me which one you precisely want. And go on talking by mail as I don't look at KZbin often! freedom2000 at free.fr
@mislav00ify10 ай бұрын
I'm in end of stage with your project written on website. Can you please help me with writing the hex code, I'm unable to make a connection with the board and don't know how to troubleshoot the source of my problem. Thanks!
@freedom200010 ай бұрын
Hi, With a bare PIC you need a pickit3 programmer to flash the bootloader firmware. Then (but after this step) you will be able to upload new firmware using the bootlaoder .exe provided in my web site
@botak33311 ай бұрын
More betrer with esp 32 sir than arduino or stm32??
@freedom200010 ай бұрын
yes a little better due to hardware capabilities of this MCU to handle "motors"
@botak33310 ай бұрын
@@freedom2000 wich type do u used sir? When used 2000ppr encorder better also sir? I ask on forum they said adc on stm32 beter than esp32. But for speed better esp32. So du u used adc esp32 for curent measure? Do u used inline or low side?
@botak33310 ай бұрын
@@freedom2000 i confiusd of type esp32 wicw are is MCPWM??
@freedom200010 ай бұрын
@@botak333 Honnestly I don't remember !
@botak33310 ай бұрын
@@freedom2000 oke thanks
@jean-louisamerio116511 ай бұрын
pour rouler c"est mieux avec la selle
@constantinb75911 ай бұрын
Congratulations on this wonderful project! I have a similar project in tests, but I use one or two Hall sensors. The results are identical. I positioned the sensors inside the case. Your solution is better. I want to test it. Question: how important is the centering, alignment, of the magnet between the axis and the sensor?
@freedom200011 ай бұрын
To be honest, centering of the magnet is not important at all !
@constantinb75911 ай бұрын
Perfect! Thank you!@@freedom2000
@constantinb75911 ай бұрын
My result: kzbin.info/www/bejne/r4DJfH-frZmNhrM@@freedom2000
@constantinb75911 ай бұрын
kzbin.info/www/bejne/r4DJfH-frZmNhrM
@freedom200010 ай бұрын
video non visible ???
@chinook716511 ай бұрын
Well done ! 👏👏👏
@atab427511 ай бұрын
very original :D
@margran111 ай бұрын
Am I correct to assume that this motor can reach faster speeds than a Nema 17 stepper motor for example?
@freedom200011 ай бұрын
Yes you are right But my control loop is only for position and doesn't work well for speed control...