I tried to do this. I put everything on right, but the seems like the Axel is too long and it's hitting the deferential
@Killerthunder Жыл бұрын
You just got to replace the drive shaft gears
@c3surfop Жыл бұрын
Those tires are gnarly!!! I need to get a set of them!
@georgivoyvodov1123 Жыл бұрын
well done mate ! Don't need to get an expensive 6+CH radio, with mixing mode of two channels . Just a servo splitter cable,which cost near to nothing. I have converted my TRX-4 and SCX 10 to 4 WS and it works excellent !
@jayayaspal1316 Жыл бұрын
Will they deliver the order to my home or I have to give extra charge
@reitplace4765 Жыл бұрын
Upstater here.. New sub just got one of them 104001 planing upgrades now. Enjoyed the vid lots of ideas... Thanks
@jarvischarles1234 Жыл бұрын
Where in New York City you run that thing
@rccarsandmusic2641 Жыл бұрын
I have now gone to home made spool. Flushing meadow or Cunningham park
@v8consumption Жыл бұрын
You can put the esc behind the motlr
@tsi_yoav2363 Жыл бұрын
does the wheels touch the car itself while turning? ...and if they do, how do u fix it?
@rccarsandmusic2641 Жыл бұрын
No was for looks
@Ghost-un4fu Жыл бұрын
Are you running it on carpet track
@FZERO202 жыл бұрын
I’m gonna go with this method. I like this over having a normal spur gear
@jeffbryner53552 жыл бұрын
Welcome to wish rc lmao
@rccarsandmusic26412 жыл бұрын
I have an update coming where there is no grinding involved
@istanarc72182 жыл бұрын
Top
@bobbygirard93912 жыл бұрын
Those tire are pure junk my shredder wobble so much with these on.
@RCCarsSaintLucia2 жыл бұрын
Where did you buy your pinion gears and whats the pitch or Mod on it
@RCCarsSaintLucia2 жыл бұрын
Btw i use the same set as you check out my latest video
@rccarsandmusic26412 жыл бұрын
Pinion is a mod 1, 13t, I I bought it on ebay from gonitrohobbies
@gkitch67552 жыл бұрын
Hi mate done a rear toe video . Pls share the support subbeddd
@gkitch67552 жыл бұрын
Have you sorted rear toe on this one?
@rccarsandmusic26412 жыл бұрын
You have to front brass to back and back to front
@gkitch67552 жыл бұрын
@@rccarsandmusic2641 tried that seemed to add toe out.
@rccarsandmusic26412 жыл бұрын
@@gkitch6755 get another front brass one
@gkitch67552 жыл бұрын
@@rccarsandmusic2641 that's what I've done it's on order . Thanks for help though ang great video I defo need to do centre diff mod as I've swap all my high speed 124019 parts into 104001 and at the moment very disappointed. And killed a pair of tyres in one run
@rccarsandmusic26412 жыл бұрын
@@gkitch6755 I'm keeping the 104 for twisty driving because it plants so well so the toe in helps. My new speed runner will be the 1/8 scale Quantum race truck. You get everything esc motor radio truck for 399, and easy 60-70mph.
@fisherkieds62822 жыл бұрын
Would buy that trash carbon chassis
@rccarsandmusic26412 жыл бұрын
5mm
@fisherkieds62822 жыл бұрын
@@rccarsandmusic2641 yeah,but it doesn't have a kick up in the front end so the front diff wo t bolt down correctly...its trash
@winstonoso58212 жыл бұрын
Will the ext wing fix on the OG kaiju?
@timboles94802 жыл бұрын
Ty for the ideas, I've been trying to find something to help me get my 104001 ready for the track(mainly to piss off the brand eliteists) Just confused as why hogg out that bearing hole? I thought it was a "drop in" other then the new holes drilled
@loga_9122 жыл бұрын
Nice build, will it be too slow if we use the stock motor?
@hosta80832 жыл бұрын
字幕檔住了大部分畫面 90%厭惡
@fastfreddy71112 жыл бұрын
How are the bevel gears holding up? thats what I keep striping!
@rccarsandmusic26412 жыл бұрын
Very good I use heavy grease and the center diff takes stress off front and rear diff.
@Blaines-smallengine-repair2 жыл бұрын
My powerhobby 4s fits fine
@RoadsideRC2 жыл бұрын
Nice guide! Onto part 2! I think a lot of original Kaiju owners would really appreciate stepping up to the EXT length. Subscribed!
@rccarsandmusic26412 жыл бұрын
After it was done, it was impressive, more of what it should have been. Sway bars are in and a must. Next will be the 10mm extentions, and then it will be perfect.
@mannyhernandez82432 жыл бұрын
Have you had issues with bevel gears using this setup? Is it still a functioning car?
@rccarsandmusic26412 жыл бұрын
Not at all, before I ever run it all diffs greased with heavy marine red grease.
@mannyhernandez82432 жыл бұрын
You my friend are the man! Ordering now. And thank you for the video.
@tbremard2 жыл бұрын
Pretty nice idea ! Where do you buy the "turnbuckles" and which caracteristics do they have ? the direcetion is indeed a big problem. once you done this try to add some lights too ! below some lighting on snow ! kzbin.info/www/bejne/lanaoJuufaqiic0
@sharksrcbash2 жыл бұрын
Got mine in from Banggood yesterday. I have had a great time with this truck. I have other bashers so I think I am going to leave this one as is. GREAT buy. By the way, it is smaller than your typical 1/10 scale. I would call it a 1/12
@ThompsonRc3 жыл бұрын
Will this work with the metal chassis
@rccarsandmusic26413 жыл бұрын
I have the metal chassis on order, it should.
@ThompsonRc3 жыл бұрын
@@rccarsandmusic2641 thanks
@doughoggatt16453 жыл бұрын
Did you use the same plastic reduction gear with this brushless upgrade. I usually try to find a metal reduction gear but so far I am unable to find one for the 12402a . If you used a metal reduction gear could you please tell me where to find it and how many tooth motor gear did you use or did you use the stock.Thank you in advance Doug
@rccarsandmusic26413 жыл бұрын
Yes I did, changed to a 14 tooth and 2845 4370kv, I got it to work
@doughoggatt16453 жыл бұрын
Great Video.Can u tell me the shaft size of the motor .I believe 550 brushed motor thats in the D7 is 3.17mm
@rccarsandmusic26413 жыл бұрын
Yes 3.1mm, I actually installed 2845 4370kv motors in them now.
@rccarsandmusic26413 жыл бұрын
Gears are 32pitch
@CANAL.TEIXEIRA3 жыл бұрын
gostei das dicas indicado por RC models vídeo que estava atrás pra entender melhor esse mundo crawler injora
@Toms_Rc_Garage3 жыл бұрын
Well done!👍
@rickdaoust47523 жыл бұрын
You inspired me lol... I liked it and am doing it.... 👍 Quick question.... Is the 40 tooth a mod1 or mod 1.5... Ive been reading and some say the 40tooth is 1.5.. Might be hard to find a pinion if its 1.5... Ill get my 40 tooth in a few days
@rccarsandmusic26413 жыл бұрын
All spur and pinion are mod1. The 40 Tooth is the center diff for the Redcat Teramoto about 20.00, good for high speed. I use mostly a 46 tooth spur for on and off road.
@rickdaoust47523 жыл бұрын
You inspired me lol... I liked it and am doing it.... 👍 Quick question.... Is the 40 tooth a mod1 or mod 1.5... Ive been reading and some say the 40tooth is 1.5.. Might be hard to find a pinion if its 1.5... Ill get my 40 tooth in a few days
@rccarsandmusic26412 жыл бұрын
Mod1
@rickdaoust47522 жыл бұрын
@@rccarsandmusic2641 i got it going... Tho im using a small pinion just meshes on the 40 tooth pinion.. Ill post a vid. I don't get much views but ill shout you out.. Thanks a bunch those stock gears suck.
Look at this on eBay www.ebay.com/itm/Redcat-Racing-BS910-051-Center-Differential-Unit-TERREMOTO-10-BS910-051-/253843318065?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l49286&mkrid=711-127632-2357-0
@briyenmartin51543 жыл бұрын
Very Creative 👍🏾👍🏾
@rvnewby14553 жыл бұрын
I am waiting for someone to design a normal PLASTIC spur with a slipper. Shouldn't be too difficult, and will be much lighter than stock steel
@rccarsandmusic26413 жыл бұрын
LC racing has one
@harepeace773 жыл бұрын
the spur n pinion using how much "t"
@rccarsandmusic26413 жыл бұрын
46spur 16 pinion
@rccarsandmusic26412 жыл бұрын
Or 40t 13
@harepeace772 жыл бұрын
@@rccarsandmusic2641 tq sir
@rccarsandmusic26412 жыл бұрын
@@harepeace77 tq?
@bevinsracing3 жыл бұрын
So the red at center diff is only option to make mod 1
@rccarsandmusic26413 жыл бұрын
You get the LC Racing diff
@brucemyers47243 жыл бұрын
High I have the X03 can you teach me how to align the car to go straight. Thanks
@chriscraft770223 жыл бұрын
where did you get those turnbuckles? mine has way too much toe out.. i am new to RC.. i have no idea where to get anything..
@rccarsandmusic26413 жыл бұрын
You can get them at EBay or Amazon
@chriscraft770223 жыл бұрын
What are they called? Are they m2 or m2.5??? what do I search?
@rccarsandmusic26413 жыл бұрын
@@chriscraft77022 search steering turnbuckles, measure first in milmeters
@chriscraft770223 жыл бұрын
@@rccarsandmusic2641 i finally found them... its real easy to get the wrong stuff, i can see.. this M2, M2.5, M3 bullshit is my new problem because not all ads tell you
@chrismagallanes88583 жыл бұрын
What's the teeth on this and the pitch
@rccarsandmusic26413 жыл бұрын
46t, mod1
@azlierusly25103 жыл бұрын
Where can I buy this spurs
@rccarsandmusic26412 жыл бұрын
Ebay 40t or 46t
@Puffalupagus3603 жыл бұрын
Would you be at all interested in trying to come up with something like this for the hpi maverick quantum platform? I bought the maverick xt but I didn't know that it doesn't have any slipper clutch, center diff or limited slip diffs at either end. I want to build some give into the driveline so I don't sheer spur gears so much.
@rccarsandmusic26413 жыл бұрын
Sorry I don’t have those
@farisasyraf48983 жыл бұрын
I cant find metal spur for it anywhere. This thing eats up spur like nobody business
@davidfarish44132 жыл бұрын
I've had mine for 6 months with no spur gear issues.
@scaccobol3 жыл бұрын
👍👍
@zhivago19553 жыл бұрын
I don't care what others say about this car, I enjoy it too. I even installed monster tires but now I have to change front diff which isn't a problem.
@ericpare32723 жыл бұрын
I replace my steering road in the front of my XO3 but yours look better then mine, where you buy it ? Thank for your video, i enjoy my XO3 because of your video 👌👌👌👌