STEP BY STEP INSTALLING A COMLETE DIFF ASSEMBALEY IN THE WLTOYS 104001

STEP BY STEP INSTALLING A COMLETE DIFF ASSEMBALEY IN THE WLTOYS 104001. IT WILL BENIFIT DIRT OFF-ROAD DRIVERS AND SPEED RUN DRIVERS.
Redcat Racing BS803-019 Complete Center Diff with Diff Mount BS803-019
www.ebay.com/i...
Redcat Racing BS910-051 Center Differential Unit TERREMOTO 10
www.ebay.com/i...
SEE MY NEW VIDEO, WLTOYS 104001 WITH GEARED CENTER DIFF RUNNING www.youtube.co...
NEW CARBON FIBER HIT FOR THE WLTOYS 104001 HERE: shop.makerfire...
THE CAR WAS PURCHASED FROM MAKERFIRE
HERES THE LINK: shop.makerfire...

[@reitplace4765]

Upstater here.. New sub just got one of them 104001 planing upgrades now. Enjoyed the vid lots of ideas... Thanks

[@mannyhernandez8243]

You my friend are the man! Ordering now. And thank you for the video.

[@timboles9480]

Ty for the ideas, I've been trying to find something to help me get my 104001 ready for the track(mainly to piss off the brand eliteists) Just confused as why hogg out that bearing hole? I thought it was a "drop in" other then the new holes drilled

[@NyamukBalaprc]

Thank for sharing video friend👍👍🥰🥰

[@Ghost-un4fu]

Are you running it on carpet track

[@Rhoedision]

hi very nice feedback..on the wltoys 104001

[@NeoIsrafil]

Thanks, this'll be a worthy upgrade. Will this save the front and rear diffs from breaking down after landing from jumps? I've heard the driveline shock can break on them when it lands hard off a jump and is spinning still. Would a slipper be more helpful?

[@rccarsandmusic2641]

Yes, I have run with 5900kv and 4300kv and head on crashes no gear breakage. Run the 46 tooth diff for grass dirt and jumps with a 16t pinion

[@jarvischarles1234]

Where in New York City you run that thing

[@rccarsandmusic2641]

I have now gone to home made spool. Flushing meadow or Cunningham park

[@mannyhernandez8243]

Have you had issues with bevel gears using this setup? Is it still a functioning car?

[@rccarsandmusic2641]

Not at all, before I ever run it all diffs greased with heavy marine red grease.

[@rcnightlife9611]

Nice. Is the spur plastic? Looks like a lot of work but worth it afterwards.

[@rccarsandmusic2641]

Spur is plastic but hard plastic. Took it for a run 5900kv no problem. Yes worth it handling and power improvements.

[@fastfreddy7111]

How are the bevel gears holding up? thats what I keep striping!

[@rccarsandmusic2641]

Very good I use heavy grease and the center diff takes stress off front and rear diff.

[@keekay_cg32c7.r2]

Why not put an Arrma Motor mount you can adjust your gear ratios easier and you can use either a center Differential or a spool

[@rickdaoust4752]

You inspired me lol... I liked it and am doing it.... 👍 Quick question.... Is the 40 tooth a mod1 or mod 1.5... Ive been reading and some say the 40tooth is 1.5.. Might be hard to find a pinion if its 1.5... Ill get my 40 tooth in a few days

[@rccarsandmusic2641]

All spur and pinion are mod1. The 40 Tooth is the center diff for the Redcat Teramoto about 20.00, good for high speed. I use mostly a 46 tooth spur for on and off road.

[@RCCarsSaintLucia]

Where did you buy your pinion gears and whats the pitch or Mod on it

[@RCCarsSaintLucia]

Btw i use the same set as you check out my latest video

[@rccarsandmusic2641]

Pinion is a mod 1, 13t, I I bought it on ebay from gonitrohobbies

[@Puffalupagus360]

Would you be at all interested in trying to come up with something like this for the hpi maverick quantum platform? I bought the maverick xt but I didn't know that it doesn't have any slipper clutch, center diff or limited slip diffs at either end. I want to build some give into the driveline so I don't sheer spur gears so much.

[@rccarsandmusic2641]

Sorry I don’t have those

[@bevinsracing]

So the red at center diff is only option to make mod 1

[@rccarsandmusic2641]

You get the LC Racing diff

[@scaccobol]

👍👍

[@gkitch6755]

Have you sorted rear toe on this one?

[@rccarsandmusic2641]

You have to front brass to back and back to front

[@gkitch6755]

@@rccarsandmusic2641 tried that seemed to add toe out.

[@rccarsandmusic2641]

@@gkitch6755 get another front brass one

[@gkitch6755]

@@rccarsandmusic2641 that's what I've done it's on order . Thanks for help though ang great video I defo need to do centre diff mod as I've swap all my high speed 124019 parts into 104001 and at the moment very disappointed. And killed a pair of tyres in one run

[@rccarsandmusic2641]

@@gkitch6755 I'm keeping the 104 for twisty driving because it plants so well so the toe in helps. My new speed runner will be the 1/8 scale Quantum race truck. You get everything esc motor radio truck for 399, and easy 60-70mph.

[@chrismagallanes8858]

What's the teeth on this and the pitch

[@rccarsandmusic2641]

46t, mod1

[@alphawlff]

Some of your links are dead

[@rccarsandmusic2641]

Thanks I’ll check them

[@hosta8083]

字幕檔住了大部分畫面 90%厭惡

[@andrejturcan]

for the next project with this car, save your time and search for the xray xb4 (2017 or 2018 version) parts. Still, seeing how much you have invested in your wltoys, you could probably run xb4 now. As it was said in one other video about this wltoys 104001. This is meant to be run as is - no upgrades. They are just economically not worth to be put into such car.

[@rccarsandmusic2641]

There is a tremendous diffrence in driveability and handling

[@thinklab4598]

Why not just build a decent car?

[@fisherkieds6282]

Would buy that trash carbon chassis

[@rccarsandmusic2641]

5mm

[@fisherkieds6282]

@@rccarsandmusic2641 yeah,but it doesn't have a kick up in the front end so the front diff wo t bolt down correctly...its trash