Finally someone who’s really showing a true test with the batteries! I picked up the 28inch Ego snowblower the other day. Looking forward to this winter
@phil.vision5 күн бұрын
Appreciate it !
@markiannetta633628 күн бұрын
Awesome .. can u outline your fees for a job like this ?
@vancouverboy72Ай бұрын
We're moving into a new house and it has a huge cedar hedge out front. Initially I was thinking that I would just cut it all down and replace it with a cedar fence instead. But I wonder if I can cut it down to something more reasonable to save it or at least put off the fence for a few years. I think it currently stands about 16-20 feet tall. Is it realistic to think you could cut that down to 6' without killing?
@illinoisoutdoorsman414Ай бұрын
So did you buy the over the head model and just take the muffs off? Or did you get the hardhat version? Or is it the same
@phil.visionАй бұрын
Hey I got the hard hat version and popped off the brackets
@illinoisoutdoorsman414Ай бұрын
@@phil.vision thanks. Was hoping the over the head popped off as well
@phil.visionАй бұрын
@@illinoisoutdoorsman414 It looks like it does!
@TimberWolf1989Ай бұрын
Really like how you laid out this video, great commentary, efficient work, and great results. Bonne job les gars!
@phil.visionАй бұрын
Merci!
@conormunroАй бұрын
Fantastic video. Very much appreciate the comparison from a real world commercial user. Gardener from Scotland. - Conor
@phil.visionАй бұрын
Cheers!
@hkk3656Ай бұрын
Don't worry about your kness kid. If your knees go bad in your 70's (that's 40 years for you), the procedure will be painless and fast. Medicine is moving quickly. I need a knee replacement. I have two friends who have had it done. They had them replaced in the morning and were walking by late afternoon. No more pain.They both said they wish they had it done earlier. Imagine where medicine will be if you're having knee problems in the future.
@starnegotiator3544Ай бұрын
Great video, pole saw on xmas list, i want to take feet off the top. In Laurentians.
@phil.visionАй бұрын
Equipementsvision.com for the ladder!
@greysonweaver4211Ай бұрын
Dude curious as to what you charge for something like this? Hahahahahaha I just did the 187ft on two sides of the driveway and they were roughly 25-30 feet tall……for the whopping total of $700….i can’t express enough the very tough lesson I learned
@greysonweaver4211Ай бұрын
I wish I could post a screenshot of it…..holy smokes it was a big old humble pie situation
@Fayettepropertysolutions2 ай бұрын
Super helpful video Phil! Can’t wait for our Cast units to show up 😎
@phil.vision2 ай бұрын
Awesome!!!
@CHB_982 ай бұрын
is it possible to shape a mature emerald cedar it’s getting to wide on the bottom
@phil.vision2 ай бұрын
Hi! Thanks for stopping by. You are always limited to what the plant has to offer. In the Quebec climate zone, we can't trim too aggressively or past the green on the side. If the emerald will be bare after pruning, its perhaps best to consider replanting a few units. Cheers!
@RemnantTree2 ай бұрын
Hi,are the cast still good?How do they survive after rain?Thanks for your review 👍
@BugandBeanFritts15 күн бұрын
Being that we work out in the pouring rain of Washington State I also need to know about water protection as well.
@pmarchy12 ай бұрын
On peut acheter ça ou au Québec Canada
@phil.vision2 ай бұрын
equipementsvision.com
@Silent_boy232 ай бұрын
merci! new sub!
@phil.vision2 ай бұрын
Merci bcp!
@Kijiji-ny7qh3 ай бұрын
How much would you charge for doing the same on a 200 foot long hedge? 15 feet wide at the top and about 12 feet high.
@phil.vision3 ай бұрын
Thousands! a 15ft wide reduction is a NIGHTMARE! If it's wider than it's taller, I wouldn't reduce it. For a trim, I'd put a day on it for 3-4 guys, so 3500$ Cad
@Kijiji-ny7qh3 ай бұрын
Thank you so much for answering. I figured that much. That hedge is a monstrosity, indeed. It was planted as a double row of cedars more than 50 years ago by my wife's grandfather and was not kept under control. We purchased the house and I inherited the problem. It takes me days of pain and suffering to keep it at the state it is now. And it was bigger when I first started with it!
@rowingtothedream3 ай бұрын
Big help just what I was looking for to do my cedars.Thanks!
@Mancubus993 ай бұрын
Bridgenorth Ontario here, just had 320 ft of white cedar hedge planted with the hopes of someday being as bushy as some of the hedges I see in your videos. What kind of cedar were these and how old were they? Mine are 9-10 tall right now, planted about 1 foot 3/4 apart.
@WillibumWason3 ай бұрын
can you tell me what the name of that ladder is
@DavidMichael-zf5lx3 ай бұрын
Any experience trimmed thuja green giant hedges? Planted some a few years ago and looking for any tips on keeping it manageable!
@davidmiller532Ай бұрын
Just buy a long hedger and a latter,trim as much as you need they will grow back thicker more compact,repeat every few years,they are very resilient.
@s.akinribido58943 ай бұрын
My guys will act like ur a p*ssy askn 4 a lil bit of help 😂. Every movement definitely adds up. Help save body wear N tear & ovrall makes day shorter. Luv the teamwork 🫱🏾🫲🏻🫡
@donhughesman57373 ай бұрын
Rent a scissor lift. Youre welcome
@phil.vision3 ай бұрын
We own one now!
@livemorededicated38814 ай бұрын
and why gas other whise then diesel ?
@livemorededicated38814 ай бұрын
alright man ! so next quedtion wath is the size of the box and would you said its to small ??
@phil.vision4 ай бұрын
We don’t have enough kilometres to justify dies. The box is 10 feet long and it is just the right size. If you are only a tree removal company, maybe you should consider something bigger. fast forward four years and we do a lot of pruning and don’t do a lot of removals so it’s perfect.
@nmbr1stunna4 ай бұрын
awesome video. great efficiency. How could I reduce the height of cedar hedges if I don't have a ladder that's tall enough to reach the tops? Is there a way or am I pooched? Thanks
@HedgeClipperTips4 ай бұрын
Excellent review, I've been struggling to find the part number for the tip protector. For some reason Husqvarna don't list this part for the 520iHT4, but I have fitted Part No 581 48 35 01 without any issues. Hope this helps.
@kayedsinnukrot63244 ай бұрын
Wat would be the cost of a setup like this one?
@phil.vision4 ай бұрын
Was 88 k cad about in 2020
@DanielTurner-i9d4 ай бұрын
I have a issue with mine brand new use twice and motor is fine however the blades seem to makeing a noise like a clicking noise and like there lose however all nuts and bolts are tight
@phil.vision4 ай бұрын
ugh, that's no fun. Im getting 2 engines changed as we speak....
@nyacoustics83734 ай бұрын
when you make that flat wall appearance, how do yo know how much to trim off so you don't go to gar back and make the tree bare?
@phil.vision4 ай бұрын
I usually " stay within the green " on the sides. I know where to go by experience. If you cut in the wood, you'll scrap the hedge sides.
@nyacoustics83734 ай бұрын
how high is that ladder? and what trimmer and how far does it extend?
@phil.vision4 ай бұрын
16' Hasegawa! Husqvarna 520 iht4 and 3 m reach about?
@danwatkins63034 ай бұрын
Thanks for the video. Same issue with the 'intermittant power surge'. Its a bit frustrating as I took it into the dealer, but of course they had no problem when running it and therefore no real solution. So glad you aired this issue for all to see.
@phil.vision4 ай бұрын
I think it's in the wiring harness! pinched wire or something,
@tpp274 ай бұрын
great video and nice work. how much does a job like this cost on average and also, could you recommend someone in vancouver area? thanks in advance.
@phil.vision4 ай бұрын
Hi, sorry don't know anyone there off the top of my head! This was 600$, 4 years ago. Should have been 900$ then. I'd be 1200$ today. Prices didn't double. I just didn't charge enough.
@arthsvic68285 ай бұрын
why no one's being honest about the play in the adjustment axle ? in any position mine has like 1,5-2 cm play at the blade edge, this is huge, in straight position, it looks like it's on the -1 decline position...... I can see the same problem on any video of it (520ihe3), this plays a lot... the steel adjustment ring not only plays itself, but it also slowly eating the painted zamac in it's slot. I'll have to disassemble it and find a way to fix this. Makes me want to get back to gas trimmer. At the beginning it was just like a 0,5cm play, I'm not abusing it, not even use it so much, but still the play grows larger with time. unacceptable.
@MrLCrystal5 ай бұрын
Have you ever experienced cable-damage where it exits the earmuff?
@phil.vision5 ай бұрын
On the tuff talk M, yes but not on the CAST. It’s a better build
@F40-c4i5 ай бұрын
Good job, safety first. Still using my 10 year old stihl gas trimmer, I’ll go electric eventually but the initial costs for the batteries needed…
@enmanuelraymundo70636 ай бұрын
Wow
@jimmyssnowremoval10756 ай бұрын
Nice truck, just remember the stuff in the side boxes on the dump portion will shift then dumping the chips.
@phil.vision6 ай бұрын
Yes it does! we have dividers in there to limit the sliding around! Cheers!
@Dog_One6 ай бұрын
❤
@paulskillman37466 ай бұрын
Well if it works up there it'll work here in the states thank you for the review
@phil.vision6 ай бұрын
A few years later, still love their clothing!
@dascubaguy6 ай бұрын
This design is a decade old. The new 525iHE3 &4 are now out with a Totaly new design style. Ask your dealer for a demo and do a comparison vid pls.
@phil.vision6 ай бұрын
I have done that already! Cheers!
@olivierthierry65656 ай бұрын
I have a 520ihe3 bought in 2022 and I have the same problem. Fluctuations in the motor Speed even in winter. My dealer said he has changed the motor but the problem remains
@liv2ryd946 ай бұрын
Have you tried the Milwaukee M18 telescoping shears yet? I have the M12 hand shears and poo pooed them at first but I really like them for cutting Leyland or Crypto limbs. Or cutting down limbs to put in my Square Barrel.
@phil.vision6 ай бұрын
Hey, no, I have not tried them yet! I am really picky about my hedge trimmers so they have to be lighter and as functional of what I currently have. I’ll have to look into that.
@T5VeeDubVan6 ай бұрын
For the audio, look at a DJI mic 2. One receiver and 2 mics. Can also use multiple receivers and more mics and then sync in post processing
@phil.vision6 ай бұрын
Hey, that makes a lot of sense, I will look into that! Thanks for your feedback
@mrcharlot546 ай бұрын
Super vidéo !! C'est une échelle de combien de pied ?
@phil.vision6 ай бұрын
Merci! 10'
@anatoliimartov76866 ай бұрын
Пользуюсь два года , Крутая штука ! Менял подшипник маленький в редукторе , плавали обороты ( разобрал собрал ручку , проблема ушла ) по ходу при нажатии верхней блокировочной кнопки , перегибает провод в Нутри . Шумят лезвия , после смачивания водой все проходит , часто нужно проливать очень не удобно.
@jefffleet57246 ай бұрын
Nice! ✂️🇬🇧
@alvaroulloa7256 ай бұрын
"Shape s coming in rather nicely" 💥 mate !!
@phil.vision6 ай бұрын
Siiiiii Parcero
@jefffleet57246 ай бұрын
Yes!
@fbroussard876 ай бұрын
A week of chipping in that little box? How do you get these jobs? That's 3 hours at most for me.
@phil.vision6 ай бұрын
This video was taken 4 years go. We are a pruning and preservation focussed company, don't do too much removal. When we do, we fill it up too quick. After 4 years, I still love all the storage on it!
@jimmybenedetto686 ай бұрын
Thank goodness a video was posted
@phil.vision6 ай бұрын
We are alive
@BraydenSomers6 ай бұрын
Happy Chickens!
@phil.vision6 ай бұрын
yummy eggs
@Enviromylk6 ай бұрын
Having the same issues with the hedge trimmer and combo trimmer, both surging and slowing.. Blower also surges sometimes like something is caught on the fan intake (but nothing is!) Has to be a battery/ electrics issue.. (Using 2 x 300 & 2 x 200 batteries 2 years old.. Haven't found a reputable service shop here in Sunshine Coast!!
@electric68775 ай бұрын
I’ve heard that it’s likely related to a temperature sensor on the control board. A lot of different battery powered equipment tools occasionally have this issue. We took our 520ihd60 to the shop and one took like 5 months and they were “too busy to get to it” then the second dealer said it was a “bent blade”. Except that a bent blade would cause the trimmer to barely move and it would make the electrical small “hum” sound when trying to press the trigger. But it’s doing the surging issue. I had this issue on my 325ilk and it turned out to be the trigger switch.