Thanks for this interesting design tips. By the way as a french viewer just wanted to let you know that you made a big mistake on your “le plus belle hôtel de Paris” sign: in fact it should be written this way : “Le plus bel hôtel de Paris” instead . Hope you don’t mind my comment but just wanted to let you know in case you would sell these… :)

Also love your shelves. Did you make them?

Would you post a link for the masking tape please? Thanks for a great, helpful video!

Wouldn't a manual cold laminator be faster?

Geesh nearly $70 a box in the US for those walnut panels now :(

It wasn't helpful. I want to know how to use it while I'm using the app

Thank you. Very helpful

could you use the wide masking tape for the cut side and 1/2" tape on the back side edge to save the expense of the wide tape?

Great vid,, 'a business coach'..what books would recommend for business?

What is that machine called?

Great! Now what is this sorcery called? Where might I procure such sorcery?

Thank you so much for doing these videos.I have learnt alot from you.

Have you done granite? Can you make a video on granite for memorial?

We’re you get that board like that idea

Tool link not there anymore. I definitely need one. 😔

Aeon is a great one, love thunder... glowforge is a great starter machine for anyone who knows absolutely nothing and glowforge has great marketing\ great honest video

wish could afford a glowforge

Did the in-line fan reduce Oder? I just got the AC Infinity CLOUDLINE S6 on Amazon and my office smells worse than when my GlowForge filter was full! 🤦🏻‍♀️ I don’t know if my in-line fan is just not working properly or if this is what I am Supposed to expect, a smelly office!! 😫

Great info, thanks!

Come on O Canada let’s see that new shop!

Great talk..thank you for sharing

Great video. Very informative and a joy to have someone with your easy style. For masking, I'm guessing it's easier to do the whole piece rather than just where you are cutting. Looking at that piece you did, if you know the shape you could just do the outline so that you save tape? Once I get going I will figure out which is best and saves time. Thank you again.

I know that the crumb tray is about 1.32" tall. I have a .65" set of tongue/groove boards that i use as a lift. I measure the item I'm engraving, add .65" than subtract 1.32" from the total so I have the "thickness" of the material I'm trying to engrave.

Do you have a link to the masking tape you use?

Hello, I love that tool! it is so much easier and faster. i am just starting cutting boards and I was wondering if the settings you mentioned are good for other woods such as olive wood? 😀

Hello do you mind linking your masking tape and 3m tape used. Thank you! 😅

Thank you! Very helpful

You look just like Glenn Fry from The Eagles. Loved your video, thanks!

what's that little cube and ring around the start button?

Great video where can I get the 3m roll and the other masking tape? Can I use the 3m sticky stuff for small items like dog tags so they don't slip around on the laser bed and move, also it should prevent it from scratching the metals.

Very helpful video! I am in the states and I tried looking up the 3m tape but there were so many different kinds to choose from 3m. Do you mind telling me the exact kind of 3m tape also the brand of masking tape? I don’t think all masking tapes are of equal quality and it seems as though you have found a good one! :)

Nice to see a new video. Nice looking shop. Looking forward to see the new stuff.

Where can I get the tool in the video? Do you have a link to the project? Or a name of the tool I can search for?

Good morning. I have a question. What the setting for cutting 1/4 acrylic?

Glad to see my adapter is serving you well. It's back on Amazon again: amzn.to/3qWaowf Feel free to use your own affiliate link. Keep forging my friend :)

Thanks for the video Scotty, I've been looking for a video explaining how multiple layer signage is done. Thanks to your video, Now I know. Happy days.

Would it be simpler to measure the thickness of the crumb tray, then measure the thickness of the substrate (charcuterie board) and do the math. Meaning, subtract the thickness of the substrate from the crumb tray to determine the substrate height?

You were very helpful thank you

Thanks for the information. Where did you purchase the masking tape from?

Just a handy tip if you don't have an adapter that fits your hose perfectly. I see a lot of 3D printed ones that address this problem and I see a lot of videos of people using ugly aluminum tape by the pound. Don't tape it AFTER you connect, tape the male adapter end BEFORE with blue painters tape. The simple answer to most of these misfitting hose to coupler is just build up about 1/4" of blue painters tape on the male end of any duct adapter, now slide the hose over the tape and, poof, perfect fit. In many case, don't worry about the clamps, just put enough blue tape on the adapter to it fits super snug, but if you want to clamp, you have this nice semi solid seal of the blue tape. All this talk about gaping of the hose when you clamp is taken care of.

Thanks for sharing. I got my Glowforge last month. I’ve loved it. Two things really stuck out that you said. First… there really are soooo many options out there. It really has so many capabilities. And focusing on a couple of things is definitely the key. Second… yeah… there is so much potential to make money. And a lot of the people that are making lots right off the bat do already have a customer base. I’m making money… but I didnt have a great customer base for this kind of stuff. So it’s not a lot. But I am making money. I just have to focus on a few things instead of trying to make ALL the things. LOL

Coreldraw is NOT a terrible program... I like that design though.

Hi came across your video and like the fact that you used the the six in hose my question would it be safe to use a pvc adapter from the Local hardware store that adapts from the 4 inches to 6 inches(PVC S&D Increaser/Reducer Coupling, 4 in. Hub X 6 in. Hub) your thoughts on this are greatly appreciated by the way awesome video😊

where can i find the tool. I can not find i.and the link come up that it is not active,but i like your video

Can you please tell me what font you are using on that board? That is beautiful!

Scott are you selling these yet? Would love to buy one.

Hello, your videos are great I've liked and subscribed. I have ordered my glowforge plus ( unfortunately for us both I did not realize about the coupon code) But I am feeling very overwhelmed lol. Mostly about what happens when my Glowforge actually arrives in a few weeks (hopefully less)! lol Oh no it's game time then! 😳 I just purchased the Forge because I love my Cricut (for fun and creative reasons, who wouldn't lol ) I've purchased a few svg files on Etsy, but then what do I do with them? How do I upload them, it's so overwhelming and exciting all at the same time. Since I purchased the files in SVG form will I be able to just upload them and basically push the glowforge button? Any help would be extremely appreciated! 🙂

Thank you Scott, I just used your referral code to buy my Glowforge..can’t wait to get started.

This was great! Can you please tell me where is the best place to get vector images from?

Tried the table method and it’s genius! Not difficult at all. Thank you sir!