If this got dual disc brake and rear hub motor not front hub motor this is perpect ultra compact e scooter

Can you put T2 and area 51

Hello there. Good video, but how can I check what type of Encoder my cabinets are using as to purchase the correct Plug and Play Harness wiring? I own a stand alone Arcade 1UP Pac-Man and Space Invader Cabinet(s).

I’m not a you tube er. And I got fast good service 😊❤

i disagree i had a hiboy s2 and the main difference I notice is this scooter actually accelerates fast enough to keep you from getting run over by cars. even in sport mode that thing crawled away from a stop. also this one is fast enough to get me down the road and into my complex without wreckless cars riding on my bumper.

Wish E-Twow would consider replacing the solid tires with tubeless puncture proof tires like many in the industry.

Where did you go? Hope you're good 👍

They're still creaky? I think that was the rear suspension. or maybe one of the four red plastic corner covers.

Hello, I am getting the Class of '81 Deluxe cabinet, and I'd like to swap out the joystick during the assembly. Do you know if your instructions will be different for the newer deluxe cabinet? Apparently, the control panel and the monitor are 1 unit, so I'm concerned that the install might be different. Also, do you recommend swapping out the buttons too, or just the joystick? Any help would be appreciated. Thanks.

Great tip. Just got the MK2 cocktail and this will be my go to option instead of making my own. Bravo for doing the leg work!

Have a stock SF2 Championship Edition Arcade 1UP cab. My buttons are crapping out on the player 1 side so I ordered a Sanwa stick and Sanwa buttons. Still waiting on the buttons in the mail. But I put in the stick at the time of this comment. I reused the 1UP faceplate and put it on the Sanwa stick per the video. My stick came with a 5 point connector with open wire ends, but I didn’t need to order the wiring harness separately I was able to re-use the wiring harness on the stock stick. Play tested it and everything seems to be working fine and the Sanwa stick is much more responsive. Can’t wait to get the buttons.

meanwhile, a quick glance shows that The Last of Us Part 2 sold over 10 million copies and the Genesis mini sold around 1.5 million. A+ content here my guy

Found one of these bad boys for 60$!

I have the Pong head to head, because the games are full screen, which is good with my low vision challenges. You're spot on, about the height. I've temporarily put it on a 3" set of furniture risers, and have just ordered a set that'll take it all the way to 8", which should make it much more comfy to either stand, or sit at, on stools. I was concerned when A1up failed to show up at one of the more recent CES shows. Hope that's not a bad omen. I'm amazed they've hung on nearly half a decade, now. And yes, I agree, the serious fans need to start realizing these products are improving, and at some point, it becomes unfair, and unreasonable to seek these products for half their retail. We really do need to start rewarding them for hard work, and attention to detail. Sure, sales are fine, but half off, is just being unreasonable in this day, and age. Was fine, for the earliest cabs, though. But, yeah, whom else is cranking out so many DIFFERENT cabinets, which are looking more, and more authentic, these days, and making them available in retail outlets? Thanks for the review. :)

I think the day’s of new titles are over, Arcade1Up will keep on releasing Pac Man, Golden Tee, Street Fighter and Mortal Kombat until they go out of business. I’m hoping I’m wrong. Maybe New Wave Toys will start making a version of a Deluxe, XL or maybe a full size cab. They might be the better option for new titles.

Thanks for the video, mate! Because of your nice tutorial, I've successfully installed a sanwa joystick in my Arcade 1up. Oh, how better it plays! Cheers!

why does it say 26 mph now on their website...?

This worked perfectly. Thank you otherwise its 180$ for the box

How price is this Indian

There is a bluetooth thing on the screen but I don't know what it does can someone help

Follow up?

a

So how does it have more power if its the same motor ?

Hello does this update still do this or is there a newer safer update available as I’m getting this machine soon , please let me know thanks 😊

I've only just bought my first Arcade1up cab the SF2 Big Blue. Like many people, as much as I would like to collect, I don't really have the space for multiple cabs. Realistically I could find space for 2 in my home but no more. For me they should be all on a unified platform with the ability to buy and add games. This could be done over the air via the internet, with the storefront available on the cabinet or even on the companion APP. The game choices could be limited to certain cab designs and hardware. This could allow more niche titles to be added and even modern arcade inspired indie titles. To me this is a no brainer as people are already cottoning on to the ability to modify android based cabs, so why not cash in on the desire to add more games. They could even sell kits to modify cabinets with new artwork as another revenue stream.

When the gate is switched is it a true 4 way and true 8 way . I have purchased some of these joysticks and when you play robotron its harder than it should be to hit diagonal and with 4 way games like pacman when anticipating to turn the corner it doesnt work well does this resolve these issue. please let me know been looking for a fix forever without any luck .

Typo donkey kong. Typo should😂😂😂😂

They shold have added all the atari games period. Ms pac man not on it nor teken or mortal combat or donley konk or cetipede thats what would have made it greater. And how do i watch movies on it?

I just baught 1 today . and the additional shelves is to position the joy stick pannel to your seating leval.

Great points and discussion. Well thought out.

Great video as usual! 👍👍

I'd love to see them just sell their remaining cabinets. I like the size as I don't have much display space. I ended up replacing everything but the full DMD. Used some old PC components from my box of crap to put in an ATX mobo with a decent GPU inside the cabinet and replaced static backglass with a real LCD monitor, and replaced the 24" stock playfield with a 32" LCD so now I can run all my pinball arcade/FX3/FX/VPX tables with Pinup Popper as a frontend. Loving it! I would absolutely buy some empty/near empty cabs from Arcade1up if I had the chance and just do the same again with PC components as bare cabinet kits from other vendors cost more than I paid for the full Arcade1UP product out of the box. No headaches or licensing issues on their part, just sell those cabinets. I'm not a giant, but at 6'2" I've been very pleased with feel and form factor of my Attack from Mars cab I modded. Thanks for the update on what's up.

I think 7 inch legs are way too much tbh. I bought some brushed nickel round legs (4 inches) and apart from looking much classier, the viewing angles have to be better than at 7 inches. Even at only 4 inches, the viewing angle doesn't seem right.

This is where they could do with better distribution, we have not get half if these cabs in Australia. I’m sure they could move more if they sent mixed loads globally.

If you decide to buy, UC80 gets $80 off this model uscooters.com/products/uscooters-2022-gt-sport-powered-by-e-twow#buy-now?aff=3

The sooner Mike B goes away the better off the community is. He’s a virus on the community

The issue as well is the different form factors. I wa t star wars and tron, but what if they drop an xl soon after? Im hesitant to buy deluxe now

Did this upgrade this week. The sanwa joystick is night and day better than stock. I really couldn’t believe it. The arcade 1up ones are junk. Whenever someone hears about an upgrade like this, they wonder if the person who upgraded is giving false testimony to justify their purchase. Folks, upgrade, it is worth it.

I think that re-releasing the same 3 Cabs over and over again was a big mistake in the long run. The Standard and Pro Models didn't help, either. From my Perspective i'd like them to release one Cab with all let's say ~50 games combined from the big three. It should be a Pro Model and i would buy it for maybe $700? One can dream.... 😅

6:20 keep in mind that huge companies like Hasboro does crowdfunding projects (search Haslab). Arcade1up is not too big to do something similar… and honestly that is where everything that’s not Pac-Man, Streetfighter, or MortalKombat needs to live.

You hit the nail on the head. The fact is Arcade1up/Tastemakers wants to be the Apple of home arcades by selling thousands of cabs to consumers in the retail market on impulse buys. That business model was only successful short term. It is unrealistic and unsustainable long-term. You can only keep going back to the well selling Pac-Mans so many times before consumer interest wanes and declines. The fact is this is a niche market. Arcade1up needs to readjust their business model to that niche market. Take a look at New Wave Toys and Numskull who continue to get licenses and produce niche cabs and are still successful albeit on a smaller scale. Arcade1up needs to go direct to consumer and they can sell niche cabs in limited edition runs like those companies do. If they don’t evolve their business and marketing strategy and adapt to their niche customer base they will surely go out of business like iiRcade before the year’s end. They have made no announcements, have no new products and their Radio Silence speaks volumes about the state of the company. If they don’t put something out quick they might as well close up shop.

Hey UC, you make some really good points here! I agree that we probably will not see niche arcade titles in the near future. I wonder if it's time to start picking up older cabs that are still available and not a Capcom, Midway, or Namco cab. In the current state of A1Up, I wonder once Golden Axe or Tron sells out, if we'll ever see them released again.

My brain is burning calories watching this video thinking of what Arcade 1Up can do too haha Wonder if the new owners' end game is to sell to like a Microsoft (or more realistically a Wayfair?)

Great topic. I think going back to the swan shape as a standard may save cost but hurt demand because a lot of us buy for the nostalgia at least as much as playing the games, and the swan was less arcade accurate. But, I think the answer is to keep using retailers for the Pac-Mans and Street Fighters, and for the more niche cabs that might not sell as many units, A1Up needs to improve their direct-to-consumer business. Don't retailers markup what, 50% or so from wholesale? Cutting them out means all the profit stays with A1Up, which means they don't have to sell as many cabs, which means they can afford to pay the manufacturers more for making lower quantities of each cab. And those of us in the hobby don't need to see a cab in a store to buy it. I noticed over the holidays that A1Up was selling SF2 Deluxe and Galaga Deluxe through Spreetail which is a logistics distributor of some kind (they were the marketplace seller on Amazon and Walmart.com). Those cabs did not have the glossy boxes that would draw your attention in a store, and those cabs were not sold in stores. So I wonder if A1Up was beginning to explore how to expand their direct-to-consumer business.

It's so difficult and impossible for A1Up to get licensing for House Of The Dead 2, but Retro Shooter can put it out with many more shooter titles for almost 3 times cheaper than A1Up.

it’s cuz the software development & support is the most expensive new cost. so they just re-release the same software packages in different boxes over & over. no new development costs, just new stickers costs. last few years more & more multiplayer games been coming out with no online play. i think it’s for cost reasons.

❤👍 Agree with ya brother! I got insane Deal on XL PacMan! My Costco was Selling the XL Pacman for $199!!!!! Also I just got 4-Player X-MEN at Best Buy for AGAIN $199!! 😂😂 It must mean they’re not selling and they have too many and so they’re trying to get rid of them..

It's obvious A1up can't possibly keep on making unique cabinets beyond what they've offered us. I think the solution is for them to maybe, as you say, make a set of IP based shaped cabinets, with access to an online store, similar to iiRcade, but go one step further. A1up could come up with a module which owners of existing cabs could install, that would allow them access to an online store, from which titles which are compatible with their particular cabinet could be downloaded to. This would allow A1up to move forward without having to worry so much about innovative new cabinets they can't afford to have produced, and which retailers likely won't want to add to their inventory. Thanks for bringing this up.

Hello man, I enjoy your channel and videos.After watching this video I wanted to tell you my problems.We are running out of room,I’m not going to spend 500-700$ on products that we have to spend MORE money on” modding” just to find out in the real world,nobody cares.And my problem is after over 40 years of work ,I’ve developed arthritis in my hands and back.my arcade days are over man.great work

Same stuff since 2018. They've been "going under" since they shipped the first cabinets. Sooner or later the predictions will be correct.