I used 1400kv BLDC motor. For Rudder, I used servo which are inside of the plane connected by wire (steel/copper). I will also make another video, hopefully, a test flight and electronics.

Thanks and if you want to make this I can give all the info to you, let me know.

Thanks, lt is not fully complete because of no intrust of viewers.

thanks

Check this link and description you will find all you need kzbin.info/www/bejne/oniVhKyBqb6saac

Check this link and description you will find all you need kzbin.info/www/bejne/oniVhKyBqb6saac

Thanks

This is slicer settings for this model 2 LAYERS TOP BOTTOM 1 PARAMETER 260 DEG TEMP NOZEL 60 DEG BED TEMP 80 T0 120 MM PRINT SPEED NO INFILL SPIRAL MODE 0.2 LAYER HEIGHT NO RETRACTION

@@M.SKhan123 only in this, o you never used retraction ?, i have a ender 3 pro and i dont know why the layer adhesion is terrible

@@carolinamariaduquemejia6981 No retration for this model only otherwise 1 mm to 1.5 mm retraction distance 70 mm retraction speed or more. Some mods have to be made in hotend for good results.

Shukria .Aj konsi dish banai ha

Does it fly? Also that link doesn’t work 😢

kzbin.info/www/bejne/oniVhKyBqb6saac

Flying in the next video if it gets some response from viewers.

NOW I AM YOUR FOLLOWER TOO THANKS FOR THE COMMENTS.

@@M.SKhan123 Thank you for your support :)

@@HakkiKrks WELLCOME ALLWAYS

Le moteur Ita 775 est couramment disponible dans les magasins ou vous pouvez le récupérer sur d'anciennes imprimantes à jet d'encre HP.

THANKS

I prefer not to join the filament, pause the print, and reload another one,

@@M.SKhan123 Doesn't that result in a visible seam which is weaker as compared to other layers? Also you would have to flush the blob that appears after pushing in filament right?

I used to change the filament while printing infill that hid any imperfections. You can make 38 feet of filament from 2.25 liters and 30 feet from 1.5 liters bottle, and 95 % prints can be easily printed in this range.

@@M.SKhan123 Thank You for the explanation, clear as usual! What thickness do you strip the 2.25 Cola bottles at? I have a calliper but it is +/-.1mm so can't use it for accurate measurment of the thickness which will enable me to guage the thickness of the strip.

I am making a simpler version. It will be finished in 1 month or so

@@M.SKhan123 It’s just that I printed this version from thingiverse and I don’t know how to put it together or what pieces I’m missing😞

@@FacundoGimenez-o5k The assembly is the same as video kzbin.info/www/bejne/oX25aZWHZ9KEatE

@@M.SKhan123 ty so much man!

@@FacundoGimenez-o5k Wellcome

8.5mm

Click the link on the video you will find what you need.

Good

Bhai ya rok jata ha barring charp b kar liya ha ​@@M.SKhan123

@@arshadshoo 2 reason ho sakty hain motor ki power kam ha thori voltage ziada ker k dekh lein ya phir bearings tight fit hain spacer check ker lein aur koi reason naein ho ga bearings ki fittings check ker lein na boat tight hoon aik dosery ki sath

Спасибо

wait for 2 or 3 days

Could you share the STL files to build the machine?

There is a link at the start of the video click to open and it will lead you to the main video. You will find all instructions and links to files in the description.

Direct drive is better for PET but Bowden works too, I use a single drive and the speed is 80 to 120 mm.

Este filamento está fabricado a partir de botellas de plástico pet para impresoras 3d.

W S . Thanks for the comments Good to know one more Pakistani in this hobby. Please share your work with others.

yes

Is there a way to chat with you about it?

Thanks I will wait for your make

It will fly but the crash is obvious because I am a newbie.

@@M.SKhan123 did you hava any rizrforrc plane,?

@@obregr Not particularly, it is hard to print thin wall planes due to the retraction settings of PET filament and I want to print one piece from one bottle. Surely I want to make it fly too hopefully.

@@M.SKhan123 interesting as far as i kno you are first trat you use bottle filement as far ,as i avaremotgers are using pla ot loght pla

Ccam you share with me the setting that you use it​@@M.SKhan123

You can print it by Yourself all files are free on Thingiverse and printables and tutorials are on my KZbin channel. Any help you require I will be there .

kzbin.info/www/bejne/aJLGoGlueM-ZhKc link for files in description

I will be making a full video soon, showing how I will be creating the project from start to finish..

La mejor temperatura es de 255 a 260 grados y recomiendo cuando se acabe el filamento pausar la impresión y cargar uno nuevo.

I made it myself it is CoreXY .

It had an incident where filament came in between two gears

@@M.SKhan123 ​Oh, I see, Muhammad, but this situation takes me second thought: 1st (this thought visits me earlier): as I see, the gear is damaged exactly by layers. Looks like this is a problem of weak melting of the layers. I think that, of course, you will solve this problem in the next, repaired, gear. And 2nd: it looks like it would be nice to print some kind of protection for the exposed gears, at least in the shape of a sparse mesh. Otherwise, it won’t be good if, instead of the filament, one of the beautiful fingers of your beloved woman gets into these gears, or the curious nose of the son of your guests, who will be admired by the beauty of your mechanisms, and wants to touch them with his own hands.