Good on yah mate 👍

I swear like is screwed down. Can’t get any of the clips to pop out when putting screw driver there

40423 Bridgette Keys

Thanks for the simple explanation

Hilll Shores

Thanks for the video. Very helpful. I have one of the car so I was able to estimate where the chips are. There are the 2 near the top corners but another 2 just under the stereo top opening at the sides.

Don't forget when you start it back up, hold the accelerator on for a good 30 seconds to purge any air out

Gotta love someone willing to take the time to video this type of stuff and share, saves at least an hour stuffing around to find out for oneself... 👍

Made that very easy to follow thanks

Good stuff, great 👍🏼 & thanks very much!!

Top video!…. Thank you!

Can i change while driving ?

Whatchamacallithoojamacall it thing sent me to the moon 😂

Boring..

Love my 06 Outback low range in the Victorian alpine regions.

Mate you have to undo the plastic nut inside housing and pull it apart, there are about 6 ports that need to be blown out, you left all the crap in those ports. Food f thought

Good video. Never trust the connector hose that comes with these pumps. The only submersible fuel hose must be spec J39R10 or it will dissolve in the gas.

Just saved me $150

I have to think mine may have ground or wiring break because this trick uses to work and now it tries to turn off but pops right back on so that's what I'm wondering

Cool

in addition to cleaning the bowl you can use a pair of long nose pliers, undo the collar at the base and completely clean under the collar.

I have an 02 outback and an 06 legacy gt and really wanting to install one of these in mine as well and curious which one you used. I know the legacy uses the same one but curious of the wrx models would work as well from kartboy. Thanks

What a useless video

Man.. seeing this is awesome! Wish I could bring my B4 with you guys!

Downvote for misleading title. That's not the dash...

Well go anywhere with full adult passenger

So helpful thanks for a) posting and b) making it clear as to what you need to do. I’m swapping out my original JDM 6cd stereo for a modern BT 2 din unit. 👍🏻

i watched another tutorial before i came across this one and the dude just took the motor out from inside the door. i tried it and rounded all 3 screws that hold the motor in haha i wish i saw your video first, I'll have to order a whole new bracket lol

Anything we should know if doing this to driver window?

Name of the parts

Thanks - helpful :-)

Hey mate - thanks for the vid. I have this exact problem - and my car is stuck at a service station. I'm picking up the part tomorrow - did you remove the bash plate from underneath to get access, or were you able to access it ok. Also - I've literally filled the twin tanks which is why I noticed it. Will this be a concern when removing the hose? ie - how do I prevent fuel from leaking everywhere and draining ...?

This video saved my holiday.

finally someone showing how to change the motor without using the motor to bring the window down.......

Could a bad fuel pump and or filter cause the car to hesitate? No power up hills ?

I've done 7-8 windows mechanism replacement before but this looks like a nightmare...

Try blowing all the hidden crap, diesel fungi and water out from under the sender housing at the bottom of the filter case with compressed air and I wouldn't lay the new filter on the ground where it will pick up injector destroying grit. Genuine Toyota filters have a D section to the sealing o-ring & don't suffer distortion like the one you had & come in a plastic bag to keep them clean until the go in the filter case. Doing the fuel filter change requires the utmost attention to keeping it 100% clean.

No body Said you should lower it😂

Very helpful

Are those cars reliable?? thinking of getting a 2010 one

Procedure fixes the silly issue . Nothing to do with transmission .

Do you have a transmission issue?

Thank you mate. Mine has just started leaking... Youve given me much confidence in being able to diy!

You don't need to remove the glass or w/stripping. Use a suction cup on the glass to keep it in place up and down. Also separate that black curved channel from the regulator then remove it first. The glass is held to the regulator in four places. Only unfasten the middle two then raise the window up out of the way and hold with tape or a heavy suction cup to keep it up. I did this alone on my '03 and i'm not that clever...

Great ‘how to’ video. I can go do mine now. Thanks for sharing.

Ethanol enhanced fuel maybe? It eats fuel systems and is the worst fuel back in the 70s you only put it in a rental car to save money they make a universal fuel filler hose for $12.00 In America vehicle built b4. 2005 can get damaged from the gasoline they sell us it's to sell new cars and stretch gasoline with corn alcohol. Corn farmers pushed it thru to sell their corn to make fuel instead of food and raise the price of corn altogether .that pays for all their new fancy air conditioned combine harvester equipment that funny enough runs on non tampered with diesel.

You call these beards? I got more hair on my taint

What did you find out about it?

she's GOOOOOOOONE

very usefull thanks