What about epson cx7800 cartridges. I don’t see an air hole on my refilled cartridges please?
@vanessamunoz32858 күн бұрын
I tried 2 steps and not on to the 3rd one. Nothing ink is coming out and I'm using my for eco solvent. So I'm hoping the last step work! Fingers crossed 🤞
@BasicArts201211 күн бұрын
I don't get the printing properties pop up. Just a print preview
@sunshinecommentswoop490211 күн бұрын
Envelope distort changed my life thank you
@karlahelton65515 күн бұрын
Your procedure + crossed fingers + prayer = Thanks for the miracle! This worked on my Epson WF 2750 (non-sublimation) printer. I hesitated to drop hot water, however carefully, into my printer, but decided why not? Epson had already advised me to buy a new printer vs. 0:02 pay to repair it at the nearest facility, @300 miles away. I appreciated their logic. In fact, I felt like a mad scientist without a clue, following the steps you recommended. But it worked. Thanks again.
@thaimex3717 күн бұрын
What did u click on when u exported?? i tried to see but u didnt mentioned it, and then the export window comes out with your files
@jimdenzler38925 күн бұрын
My Epson cartridges don’t have holes in the top (or anywhere) like your do!?!
@JeffreyStrader25 күн бұрын
Are you married????…( I need a knowledgable person like you around all the time 😂)
@CharineVanstraaten25 күн бұрын
I'm going to try that immediately. Thank you
@julezbalma780829 күн бұрын
Hello! I have an Epson 2400 and it doesn’t have this feature what else can I try?
@mnkelley84Ай бұрын
Same exact thing happened to me and now that I got that part figured out I need to try and figure out the ICC profile stuff bc my colors are not good especially when I press my tumblers
@Lu_trendyАй бұрын
Can I convert my espon w-3540 printer to a dtf printer ?
@derekduchamp4603Ай бұрын
To add to it iam gunna print something with lots of color and black every week,id rather waste a lil ink then go thru this again
@iselahernandez5067Ай бұрын
Thank you so much!
@SoulQueenWuАй бұрын
Thank you so so much!
@skydriver5709Ай бұрын
I was thinking about trying this myself, but I had a couple questions. I know converting to sublimation ink voids the printer warranty, but does it also damage the printer head? I've heard some people say their printer needed a head replacement 3 times in 6 months, and another who said their printer head was fine after a year. My second question is what do I do about my images that contain white areas? Since there's no white ink and I'd be printing on film, I don't want the white areas to just become transparent, because the color of the fabric might throw off the way the image looks. Is there any way around that or is there something I don't know?
@sherrybradshaw65042 ай бұрын
Great job. Thank you
@angelawilliams70792 ай бұрын
Hi, love the video; great tutorial! I'm trying to make an artboard like yours, since I have multiple product types (mouse pads, magnets, etc.) that use the same design. I would love to speed things up by just updating one object for all of them at once. I already created some mockups as separate PSD files, and am trying to combine them into an artboard. Resources I've found so far say that you need to copy the same smart object into each artboard if you want to update them all at once. Does that mean I need to redo all my warping/adjustment stuff, or is there another way to do this? (If you ever make a tutorial on that, you'll be my new favorite person, lol.)
@kb47ny2 ай бұрын
Hello I just converted mind today and I ran into the same problems but before I seen this video. My instructions told me to let it sit for 24 hours before using it agai I would like to know. Did you ever figure out how to fix the problem? Thank you.
@janetperkins11752 ай бұрын
Awesome! Cyan was not wanting to cooperate. This did the job. Thank you.
@wendym2992 ай бұрын
Finally! My Cyan ink is printing!!! Thank you so much for posting this video!
@Slimliciousm2 ай бұрын
It worked thank you so much 😊
@AzScreenPrintingMat3 ай бұрын
This actually worked for my epson 1430 printer I use to print out film positives for screen printing. My mind is blown! Thank you so much for this!
@hectorortiz12063 ай бұрын
I had the same problem on my Epson XP5100 (no printing even with new cartridges), I tried all the possible fixes I could find on KZbin, none of the fixes worked, I ended up trashing the printer, no more Epsons for me, probably going back to H-P.
@donnyriggz3 ай бұрын
Let's try this on my WF-2650 that has been sitting for 8 years. There are no expectations that it'll actually work, but if it does, it will save me from buying a new printer.
@robertoj.perezburgos21063 ай бұрын
Thank you! Got my printer up and running!
@rissasmithg3 ай бұрын
Tysm, I recently bought a used Epson ecotank printer off EBay and it probably wasn’t used in one or two years. I did the soak method (with cleaning solution instead), the air filling with the syringe, then two power cleanings (I know it can shorten the printer life but printhead cleanings only messed up the ink even more), which got it working again.
@joaniee53793 ай бұрын
Thanks so much for this. I have the Designer Edition so it didn't let me save as a png or jpeg. Instead, I had to (In Windows) use the snipping tool to save it as a png (or jpeg), then I could add to the Patterns folder in the Library. Thanks so much again for this very smart & clear video.😀
@StevenShelbyDesign3 ай бұрын
Does anyone know how to add a printable stroke or printable image to the design with out the cut.
@rbradley5273 ай бұрын
Do you have a video on clogged print heads for this printer?
@chrispennington55163 ай бұрын
This video was excellent. I will have to try this out as my black won't print on norma; paper at all except if I select photo glossy paper.
@appodemus29373 ай бұрын
fabulous!
@guccimane11024 ай бұрын
Perfect. Straight to the point! Thank you 🫱🏼🫲🏾
@carlosmoreira93514 ай бұрын
Thank you for your video with your information to unclog the Epson printer. It worked great. I did all 3 options so as make sure that it fixed it. I was not aware of the purge method by pushing air/ink through the cartridge. THANK YOU!
@adroitfg4 ай бұрын
The exact one I have at my school!
@SeanMasterspage4 ай бұрын
THANK YOU!!! I am not sure which one did it but working great now.
@babyhughie9744 ай бұрын
thank you ! Off topic but have you had trouble with silhouette and your older mac? i have that one as well but keep needing different versions of silhouette!
@babyhughie9744 ай бұрын
So glad you said this. It's a shame that people are good at selling but not designing will make so much money!!
@user-ce2nd8gn3h4 ай бұрын
Great! Thank you very much!
@shirleykathan-sayess57644 ай бұрын
Thank you so much! Excellent tutorial on making mock ups.
@derekroutledge1004 ай бұрын
Thank you for the video. I was able to follow your tips and saved my WF 2710 printer from being put into the waste bin. You saved me a big headache.
@user-vz8pb2fk5d4 ай бұрын
Could you see if the printer would do a 13inch x 23 inch print under custom size. If you could try it I would greatly appreciate it. thx
@user-vz8pb2fk5d4 ай бұрын
I would not bother registering the printer. When you put dye sub ink in it immediatly cancels all warranties.
@beckiegorman35924 ай бұрын
Can I convert at Epson workforce Pro WF-4833?
@beckiegorman35924 ай бұрын
Is a workforce pro , convertible ?
@LauraHafer4 ай бұрын
ANy recommendation for an Epson F170 sublimation printer? I can't get my black to work.
@whateveritsdarly4 ай бұрын
Dude thank you so much! Life saver!!
@LaEscuelitadeMari4 ай бұрын
Thanks for posting the video 😂 and thanks for sharing that uneasy part of something not working out on the first try! I’m thinking on purchasing this machine, I hope I have better luck because I’m not as patient as you are 😅 I love your sense of humor by the way ❤
@kingpenny24 ай бұрын
Thank you I was about to throw my printer. Away
@IsmailEkundayo4 ай бұрын
Mine isn't showing the cartridge ink at all. I've tried numerous times buh, it's still not working. I hope you can help me here.