Sublimation Help!: How to Fix Stubborn Clogged Print Heads (for Epson Printers)

[@stacysmith3697]

I got nothing but blank pages no matter what I tried. I left my printer for about 6 months without printing anything. After 3 days of trying everything I stumbled across this video and you are a rock star! My printer is now printing and all colors are perfect! All I did was try the hot water once and ran the head cleaning. After that it printed perfectly. Many, many, many thanks to you!

[@AudioCheck12]

Your post gives me serious hope. Sounds like our boats are similar! Id be so stoked if this works.. The stuff I printed before the clog was soooo dope!

[@Missyworld895]

I will definitely try this tomorrow and the. Comment

[@gergemall]

I’ll be lucky if i get it working at all

[@jjhomestead802]

This gives me hope! Lol

[@valerierochin7246]

Im hoping for the same results! I’ve already done the cleaning with the solution and no luck. It actually stopped printing ink period and finally back to the broken lines. Im trying the hot water method right now. I wanted to try the priming but i dont know how to remove the door to the ink carriage

[@MzSlack01]

Omg when I say I could reach thru this screen and just give you the biggest hug!! My printer has been clogged for 6 months or more I tried EVERYTHING I could think of! Still nothing! I googled solutions today and your video popped up, I did the hot water twice then I pushed air thru the cartridges, then printed a purge page and it's working perfectly nowww!! I literally love you right now! Thank you so muchhh!!!

[@bamurphy6521]

I have a Workforce WF-7710. You are the best. I just tried your tip for addressing the issue of my color cartridges that would not print well. I did not have a syringe so I used a cotton swab to drop the hot water on the sponges. After letting it sit for a few minutes a print head cleaning and print nozzle cleaning did the trick. Thank you so very much.

[@marcelobeas3867]

I sholde have read the comments first, great idea

[@idzzin4all]

Never had a clogging problem in 9 years... until today. Thank you so much for this video! I was skeptical but had nothing to lose (except for a clogged print head). It worked like a charm!!

[@ehjohn027]

You are awesome. I purchased the Printhead Cleaning Solution from Amazon and tried that and when i tried to print the pattern page, no ink showed up. Oh my goodness i really thought i had messed my printer up. Then i found this video today and i did all three suggestions right after i had did another printhead cleaning solution. My colors are back. I did a little happy dance lol. Thank you so much.

[@lisafrias3571]

I want to sincerely thank you! I live in Dominican Republic and taking your printer to get check with a professional can get really expensive. I sucessfully fixed my printer and I'm very thankful for that.God bless u!

[@ElizabethOdle]

Thank you so so much for your help. We purchased our Sublimation printer for our High School a year ago and we used in at Christmas and haven't since. Everything was so clogged. Our tech department couldn't figure out the issue but after watching your video I was able to repair it so my students could use it again for their projects. You are amazing. Thank you so so much.

[@kelseyadams9653]

THIS WORKS!!! Had an Epson WF-7210 sitting well for over 2 years. Ended up buying a new sublimation printer and let this one sit even longer before touching it. Decided to try and get it working again. Did hot water 2x Purged the cartridges 1x Realized I needed more ink 😅 Purged again 1x Printed blocks of CMYK and they came out perfect!!! Thank you for making this video!

[@AmericanEtch]

I am so glad I found you and what you did with the syringes to push air! I wasnt getting any yellow and now it works!!! You are a life saver!

[@lndlcy]

you are the best you saved me buying blotting paper and unknown chemicals and hoses from another you tube but a company not a individual like you. your so down to earth and plesent and appreciated thank uou on going to find out what sublimation is now

[@sofiamendonca2054]

THANK YOU! It worked just with the 1st step! I was so sad to have wasted money on cartridges and the maintenance shop was so expensive it would not have been worth it.

[@hollys5073]

This worked! Thank you very very much! I almost gave up and felt so stupid! My husband insisted I check for others who may have run in to the same issues and your video helped tremendously! Thank you!

[@DebbieDoesDesign]

You’re welcome! I’m so glad it worked!

[@MetisAmour]

I bought an Epson Eco Tank 3 weeks ago but have had it unopened and debating returning it due to stories about having to print every week to keep it working. Glad I found your video now I have more confident to keep it and try these things if it clogs since it will be only for hobby use. I of course want the sawgrass since it doesn't have these issues just can't afford one. Thank you so much for Sharing!!!

[@karlahelton655]

Your procedure + crossed fingers + prayer = Thanks for the miracle! This worked on my Epson WF 2750 (non-sublimation) printer. I hesitated to drop hot water, however carefully, into my printer, but decided why not? Epson had already advised me to buy a new printer vs. 0:02 pay to repair it at the nearest facility, @300 miles away. I appreciated their logic. In fact, I felt like a mad scientist without a clue, following the steps you recommended. But it worked. Thanks again.

[@reginabartee7101]

OMG I did your technique to my Epson WF 7720 and THANK YOU! THANK YOU! THANK YOU! It has worked. I am no longer going insane on how to jumpstart my sublimation printer. This time, I will do daily printing just so I can keep the printer heads active.

[@dcarranco]

I just wanted to say thank you, you saved my printer and you saved the landfill from more trash. I tried everything to fix the clogged print heads and nothing was working. I just wish I would've bumped into you sooner 🙂. Who would've thought hot water would've made it work. Thank you!!

[@jenniferann9526]

This was incredibly helpful!!! My new cartridge only printed about 20 sheets and then completely quit 2 colors. I only used priming and it was successful!! The second printer would not print yellow no matter what I tried.. priming was the answer!! Thank you so much!!

[@kg6jul]

I did not use my Epson printer for over year, and so it was in bad shape. Before getting rid of it, I thought I would give it a try at attempting to unclog it. I followed the instructions you provide in your video, and hey, it worked! Thanks for the information, and simple to understand video.

[@campingwithkids3350]

I've been fighting with my printer for the past 2 days until I watched your video. This worked like a charm. THANK YOU!

[@ScarFanatic]

I never comment, but this is the best and easiest video on KZbin to unclog print heads. Your method has never failed me, even when nothing else worked. It only took 2 tries

[@ClaiCesar]

Thanks a million to this tutorial. My black ink was not printing at all no matter how many times I print head clean it. I did the hot water soak 2 times followed by priming the line on each soak. Now its printing.. thank you so much. ❤️

[@saltbae1789]

SUPER HELPFUL. I was thiiiis close to buying a new printer, but this video saved the day! I'm going to try these tips today, thanks again!

[@thekraftekatt61]

OMG it worked. My Cayan stopped working last Friday. Well it was out of ink actually all of my cartridges were empty, not sure how they were printing. I did the steam method twice, and right before I printed I did the syringe thing in the Cayan only. I cleaned the print heads and then printed and it worked. Of course I have a little mess on my printout, but a couple of test prints will clear this up. I AM SO GLAD I CAME ACROSS YOUR YOU TUBE ON THIS!!! You know I am a follower now. THANK YOU! THANK YOU! THANK YOU!

[@LauraElison]

After battling for days, after watching this video I fixed it in 30mins! Thank you so much for sharing

[@tinkscreations7701]

Thank you so much! I have spent hours purging, head cleanings, etc with no fixes! I done the priming and it worked!!!

[@unknown4life10001]

I've tried for the last 2 days to try to get my printer to print after leaving it sit for a few months, this is what worked! Thanks for sharing!! 😁😁

[@natashapepper4961]

You are a Godsend!!!!!!!! I haven’t used my printer in 2.5 years and I was going crazy because the print head cleaning wasn’t working! I literally followed you step by step and omg!!!! 🙌🏽🙌🏽🙌🏽🙌🏽🙌🏽 I def just subscribed to your channel!

[@DebbieDoesDesign]

Yay! I’m so glad it worked for you!! These printers can sure be a pain sometimes 😂

[@kaseyleet7218]

Since finding this video and fixing my printer (YAY!!!), I have sent this video to SOOO many people on all my groups. Every time someone says they have an issue I link them to this video!

[@DebbieDoesDesign]

Thank you! I appreciate that! I’m glad it worked for you! ❤️

[@TheSkydiverphoenix]

I have been fighting my Epson WF7720 printer for a week with no success. I did your method and cleared the clog immediately. Thanks for putting this information out there..

[@carolrendes9962]

My 7710 has been sitting also for two years and I use it for subbing with Cosmo ink. I’ve been putting it off because I know my anxiety will go through the roof. I’m so glad I found this video. I’m going to try to do this in the next couple days. Fingers crossed!! My printer wasn’t used much so I hope this works. Thank you

[@be4018]

Same lol it literally was sitting for 2 exact years and I saw the color of my prints and tried the nozzle cleaning and freaked out because it didn't work. I really didn't want to buy another and thankfully came across this video

[@DebbieDoesDesign]

I hope this helps! Keep me posted! Both of you! 🤞🤞🤞

[@carolrendes9962]

Did a purge and my blue isn’t working at all. I think I need a different syringe. The head on mine is too large to fit in there properly. Heading to the store. Please let this work!!

[@RoommateWiLLE]

@@carolrendes9962 did it work?

[@carolrendes9962]

@@RoommateWiLLE I didn’t do the water. I just pushed air through and that worked.

[@Natalie1234534]

Thanks, it worked!!! It took a few goes. I also read somewhere the printer should not be near a hot place. I had moved the printer into my kitchen last week where it is warmer to work. I shall keep the printer away from the radiator if that was causing the problem. Thanks again 👋👋👋

[@TeresaWilliams-xn5gx]

No Debbie I know this is way past your video release date: I had to tell you : someone gave me an epson 7720 FREE thought it was broken today. I used the hot water method the first round then 3 head cleanings and a last nozzle check..and its working like a champ..beautiful prints I thank you so much ..I hope you see this even thought the video was released 2 years ago. THANK YOU.

[@DebbieDoesDesign]

Yay!! I'm so glad to hear that!! ❤️

[@MrsAshmo2010]

I just wanted to thank you! Mines has been sitting for about 2-3 years also. The priming is what worked the best for me! Thank you again!

[@DebbieDoesDesign]

Yay! I’m glad it worked! Priming is always my go-to too!

[@xcmarie013]

THANK YOU SO MUCH! I could cry happy tears! I had a WF7710 sitting for almost 2 years because I couldn't get it to print correctly. Did the soaking step and pushing out the clog and my black was printing again 🥹

[@AzScreenPrintingMat]

This actually worked for my epson 1430 printer I use to print out film positives for screen printing. My mind is blown! Thank you so much for this!

[@michellehill367]

Your are my new FAVORITE PERSON! My ink heads started to ruin my life until I watched your video and I only applied really warn cleaning mix of mostly windows cleaner once and and a print head clean. I'm back at it. Good luck to all.

[@derekduchamp4603]

Great idea heating up the window cleaning solution that's what I'm gonna try in the morning,, thanks again

[@derekroutledge100]

Thank you for the video. I was able to follow your tips and saved my WF 2710 printer from being put into the waste bin. You saved me a big headache.

[@williee.perryjr4751]

OMG! THANK YOU!! I just bought and converted an wf 2930, did so many cleanings and only one color was printing, I was getting so frustrated, tried these steps instant results!!

[@michellehinckley8478]

My printer was not as old and clogged as yours but I was getting really bad lines in my printing. I used the Premium Matte setting like you recommended and it suddenly printed fine. Now I’m using that setting on everything. Thank you for the tip, even if unintentional.❤

[@sarahhennecke]

This helped me today as well!!

[@timistumblersdesignsllc9941]

This saved my WF-7720 from the trash heap! Thank you, thank you, thank you!

[@kayellis9771]

Thank you! Thank you!! Thank you!!! My WF-7710 is printing beautifully after having it show magenta was empty when it was actually full. Priming did the trick.

[@Zmasterflash]

Okay, I have to say that my printer hasn’t been used much for close to 4 years. The print quality was terrible. I followed your water instructions given by a copier repair guy applies water twice and the printer is working beautifully now. I’m shocked that it worked, but thankful to you for posting this video!!!

[@officermeyer]

Running a weekly nozzle check helps to prevent clogs just FYI 🥰 TYSVM for sharing! You saved my printer from printer heaven 🥰

[@monicachiarappi6350]

Thank you!! My yellow was stuck, it always gives me trouble because I don't use that color often, I mostly print just black. So it clogs a lot. I never can get it unclogged without hours of misery trying different things. The prime method and 1 printer head cleaning did the trick!! So thank you for saving me hours of unnecessary printer head cleanings.

[@Sarcasmic]

I am SO happy I found this video! Saved me the huge headache of buying a cleaning kit and going that route to unclog my Epson F170. Both the Magenta and Cyan print heads were clogged after two weeks of sitting idle. -_- This method cleaned them both and I'm back up and running. Thank you so much for sharing this info!!

[@laurensalfi3492]

how did you do it on the F170?

[@shellyjorgensen2441]

Thank you so much for this hack. I was ready to throw mine away. I even pulled a new blank cartridge out and filled it up and that didn't work. I did have to do the priming because the first part didn't help at all. I am back in business!! Thanks so much!!

[@lndlcy]

I wish I'd found you before I bought a new printer. I'm glad yours gave you trouble as it taught us a lot more tips and tricks

[@michelleguess6394]

Listen I have tried for over a year to understand this and the hack worked !!

[@KristiNadack]

Thank you so much for this video, I couldn't get my color to print and I was about to lose my mind and now my color is printing after using the syringe to purge the cartridges! Thanks again!

[@daleedlefson5722]

Did the hot water 2 times and now works great! Thank you!

[@BarbaraCueto]

Thank you so much! After this hack and 2 cleanings of my Epson wf-2760, which was completely clogged, it worked like a charm! I'm so happy that I don't have to go out and buy another. Keep up the good work!

[@nikkiclark279]

Oh my gosh!!!! You saved me!!! I had bought a cleaning kit and it didn't work. I thought I would be stuck buying another printer and then I saw your video!!!!!!! THANK YOU THANK YOU THANK YOU!!!!! Thank you for sharing your knowledge !

[@Mom2JnA]

Thank you! Thank you! Thank you! So many helpful tips, you are a great teacher and effectively share a ton of information without sounding condescending! That's a real feat these days😉

[@KizdaAries]

I recently converted one that was sitting for 3years. Thank you because I almost threw it away.

[@DebbieDoesDesign]

That’s awesome! 3 years has got to be a record! 🙌

[@janetperkins1175]

Awesome! Cyan was not wanting to cooperate. This did the job. Thank you.

[@Mad_Mike_414]

Had same issue, was driving me crazy. I found your video but Instead of hot water I used rubbing alcohol and it worked great first try!!!!

[@LoriRobinett]

Whew!!! This worked! Took 2 tries of the syringe/steam method and I'm back to printing!

[@rissasmithg]

Tysm, I recently bought a used Epson ecotank printer off EBay and it probably wasn’t used in one or two years. I did the soak method (with cleaning solution instead), the air filling with the syringe, then two power cleanings (I know it can shorten the printer life but printhead cleanings only messed up the ink even more), which got it working again.

[@carlosmoreira9351]

Thank you for your video with your information to unclog the Epson printer. It worked great. I did all 3 options so as make sure that it fixed it. I was not aware of the purge method by pushing air/ink through the cartridge. THANK YOU!

[@CharleneBernicky]

Debbie!!!!!! thanks again doll

[@david4076]

Same here!, printing only blank pages this video is a lifesaver!!, thank you so much!!!

[@shelitasmothers7831]

I have one I’m trying this but the ink is coming back in the syringe what am I doing wrong

[@garysnyder9740]

My Epson 7720 (for dye sub) was printing great except yellow. I took out the print head and cleaned but nothing. I soaked the head in water then pushed air through the cartridge and now I have lots of yellow. Thank you for sharing!!

[@onecraftingmomma20]

THIS RIGHT HERE....... THANK YOU SO MUCH WORKED LIKE A CHARM AFTER FIGHTING WITH IT FOR 2 WEEKS!!!!!!

[@DebbieDoesDesign]

Yay! I’m so glad!

[@veronicahernandez3926]

I was already giving up on my printer! But I tried this and its working perfect now! Thank you

[@michellehill367]

OMG thank you because there is a few talking about cleaning the printer (non sublimation) and using epson ink.

[@ispeaklife7]

Thank God for your video! I had almost given up. Everything's working great. after I use the air filled syringe technique, my colors came out great with a little few skips.

[@DebbieDoesDesign]

That’s my go-to trick! Priming almost always fixes it for me. I’m so glad it worked for you too!

[@aestheticlexi_robloxgirl8204]

Most AMAZING tips EVER!!! Got my printer back up and running in no time at all! Fastest ever!! Thank you! Now fixing to print and press a tumbler with your amazing 3D succulent design Will post to your FB page! :)

[@Itsjustme726]

Thank you for making this video. I have come back to this video 2 times now to unclog my machine.

[@teresaescoto4837]

Saved my day! I subscribed so I wouldn’t lose you in the mix.

[@noeleach8809]

Thank you! I have not ran my printer in over 2 years. I am going to try these now! I have been cleaning the heads for a while now.

[@cpelt7]

Thank you….Fought with mine all day…. The Prime pushed it through!!! ♥️

[@apike199]

Great advice here. May I add, Tip on printing the color purge sheet: delete the colors that you don't need to purge to avoid wasting those colors. And you find find a video on how to create your own purge sheet in Word by drawing the squares, no borders, fill colors in custom hex per video, size them according to how much you want to purge.

[@yanirahernandez7906]

Your tips worked on my printer!!! Yay! I thought I needed a new printer. Thank you!!

[@johannandrews4005]

I’m so glad I found your video! The hot water trick was what worked for me!

[@stephaniemartin6278]

You are a life saver… I was about to just quit!!!! Thank you so much

[@tinsuneg6554]

Thank you so much. I finally got to fix my printer following your video. God bless you.

[@wendym299]

Finally! My Cyan ink is printing!!! Thank you so much for posting this video!

[@judygreci4605]

Oh my goodness thank you thank you thank you I have worked on my printer for two days, and I tried your method and it works I so appreciate it thank you again!!!!

[@TheJourneyOfMeMyselfAndI]

This actually worked especially after i applied some positive pressure in the ink tanks. Thanks

[@CassandraSpeaksTruth]

The best solution video I’ve seen by far!

[@mysttbsyg]

Well mine has been sitting about 3 or 4 years so I will definitely try this!!

[@lynnhaste5225]

Thank you so very much for the wonderful video! I've got a show coming up this week and your instruction made it possible for me to get my work done in time.😊

[@FeliciasJourney27]

Thank you so much! My printer has not been used in a year and I could not get my Christmas presents done until i tried this!!!

[@rogers6168]

Hi there, I use a Epson WF 7710 & was having problems. Did the syringe blow air trick & it worked like a champ. Thanks for posting video & help!

[@DebbieDoesDesign]

You’re welcome! I’m glad it worked!

[@abstern-s2f]

IT WORKED!! Thank you so much! Only had to steam once and its printing colour!

[@tiffanygarcia2887]

Omg !! Thank you so much. I was freaking out. I have a pop up sale I. A few days and it stopped working mid print. This helped

[@MarkBolles]

Loved this video! Mine was not as bad as the one you worked on, but I was able to easily clean the print heads.

[@chrispennington5516]

This video was excellent. I will have to try this out as my black won't print on norma; paper at all except if I select photo glossy paper.

[@SuperTeresaann]

I tried this and it worked beautiful for me. Thank you, thank you so very much. I'm so happy that this worked for me👏🏽👏🏽👏🏽👏🏽👏🏽👏🏽❤️

[@DebbieDoesDesign]

Yay! I’m glad it worked for you too!

[@StarrOlinger]

Thank you Alex! Going to try the big guns cleaning when I get home! We converted an ET 2850 for sublimation.

[@shakirthomas5612]

Did this work for you?

[@r3dd09]

What do you recommend for an f170? Power cleans haven’t fixed my clog.

[@consumablecorner150]

"Hey, honey, why are you watching this? We don't even have a printer?" "Uhh.."

[@Mehbuba23]

Omg thank you!!! I’m going to have to try these methods before investing in a new printer.

[@miguelmendez3035]

You are my angel!!!! Thank you, i got my printer fixed doing the primer… thank so much!!! 🎉🎉🎉🎉

[@temekagoff929]

You save my printer, I’m so happy I came across this, keep up the good work. Thank you

[@AniketNBorhade]

This is the best video on the topic

[@SeanMasterspage]

THANK YOU!!! I am not sure which one did it but working great now.

[@AudioCheck12]

LIFE!! After months I finally see lines! What I ended up doing was a Backwards purge? Well call it a Enima.. I took the syringe with no needle and it fit snug in the hole that the ink flows from. After a few solid slow pushes I was able to move some of the clog!. I think for the really clogged ones I'm going to do the same thing but with the boiling water. It's a silicon niple inside the hole. I image food grade able to withstand boiling temps easily.

[@gloriamendez5195]

Thank you so much 👏🏽👏🏽👏🏽👏🏽👏🏽 it work for me , I was trying to fixed it for the past two days

[@kamrihill8298]

Thank you a thousands time for your video !!! i always forget and then I recognize the thumbnail !!! Thank you