Aren't the ID of those smaller than the female end of a brass hose connecter ?
@EleyCorpКүн бұрын
No. Our quick connectors are 3/4-inch ID flow, while our hose is 5/8-inch ID flow.
@Garth2011Күн бұрын
@@EleyCorp Obliged
@JediKnife16 күн бұрын
Thanks for the video; I’ve been enjoying my Eley hose reel cart!
@tonymultaniАй бұрын
Do you guys ship to Canada ?
@EleyCorpКүн бұрын
Not yet. Soon.
@johnlegend9553Ай бұрын
I went to your website, added stuffs to card, tried to checkout, only ships inside usa. Is it possible to ship to malaysiam
@EleyCorpАй бұрын
Thank you for your interest. We don't ship internationally. Sorry.
@mrmullin73 ай бұрын
If you had a bench vice you could probably clamp it on two flats of the large outside hex of the piece that’s coming loose and use the other part to turn it tight. You’d have to be careful not to crush the threads though.
@mrmullin74 ай бұрын
If you go the wheeled cart route, you could buy the twelve foot leader hose, and then roll the whole cart out to where you pivot. My hose spigot is set up behind some landscaping, so I basically roll it out to where I can clear everything and then start pulling hose off the reel. That was my only mistake is I started with a six foot leader hose and a two wheeled cart. The next year I bought the 4 wheel kit and a twelve foot leader. It’s perfect now.
@CJ_Detailing4 ай бұрын
Hands down the best hose, reel, sprayer and accessories. I have purchased from Eley for years and nothing comes close to the quality and durability. Great video explaining how to determine hose length. My advice to anyone trying to decide is to always add a little more than what you think you will need.
@davidh.85134 ай бұрын
You can NEVER go wrong with an ELEY product! Ft. Wayne, IN.
@Johnny53kgb-nsa5 ай бұрын
Are all Eley products 100% American made? Thank you, John.
7:44 I am not able to install the cam lever break its falling off 😢😢😢
@EleyCorp6 ай бұрын
You should have at least an inch of axle to push the swivel on and tighten it down onto the axle. If you don't have that much showing, rewatch the video and double-check assembly. The reel needs to be fully pushed onto the axle with the cam-lever brake placed into the notch in the flange. If you still have issues. Reach out to us via the customer support on our website: www.eleyhosereels.com/pages/customer-support-garden-hose-reels-2009-to-present
@personxyz18406 ай бұрын
@@EleyCorp thank you, yes that was the reason it was falling off, now all good.
@realcleanecspressurewashin63876 ай бұрын
Does it get stiff in the sun?
@EleyCorp6 ай бұрын
No, it does not. Long-term exposure to UV rays could cause some discoloration, but certainly no stiffness.
@philvelasco13634 ай бұрын
That's what she said
@2elgnismi6 ай бұрын
That looks like it would reduce water flow compared to the original design, was this done to cut your cost ?
@EleyCorp6 ай бұрын
Nope. It actually costs more to produce this design. The change in the shape of the garden hose swivel gooseneck does have a "theoretical impact" on water flow, but it is so minimal that our digital flow meter with a resolution of 0.01 gallons per minute (GPM) and our pressure drop gauges cannot detect it.
@opponoastos8 ай бұрын
I can connect my Flexzilla hose to this, right?
@EleyCorp6 ай бұрын
Yes.
@brianw3388 ай бұрын
Anyone wondering about this water hose I’m telling you this product is hands down the best. I have two and cannot find fault with either. Perfect? Probably not. But, in my opinion the best water hose in existence. I don’t know these guys and get nothing for endorsing their product I’m just a satisfied customer.
@christianmohr63298 ай бұрын
This is the swivel that the Eley hose reel should have come with. I have two Eley units and have gone through four of the copper style swivel units. If there is ANY water left in them during the winter and it freezes you can say goodbye to the swivel unit. I have since come up with a workaround that fixed this problem. Also, I still have an American made Rapid Reel design from the early 2000s that I have left out in the winter that still works flawlessly! The new Eley units are good but not as good as their original Rapid Reel units.
@emailfilter71078 ай бұрын
I wish you’d include a no-kink spring with your hoses as you used to a few years ago. No matter how careful I am, I have a subtle kink on the (Eley brand) hose when mounting onto the Eley reel.
@EleyCorp5 ай бұрын
Please watch the linked video. I should help resolve the issue. kzbin.info/www/bejne/gnXWYmt9e6eZl9k
@tskichannel23029 ай бұрын
I know what I am asking is like asking if I should wear a belt and suspenders. But, I am curious. When you say tighten firmly, is there a torque spec? Also, would you recommend I use blue thread locker on the bolts. It seems like that would keep it from ever loosening up.
@EleyCorp9 ай бұрын
There is no torque spec, and you can certainly use lock-thread, but it is not needed.
@tskichannel23029 ай бұрын
@@EleyCorp Thanks. I did the assembly this weekend and it was very easy. The video is very helpful. A couple notes: 1) I did use some blue thread lock. I use the blue, paste stick so it is easy to add a tiny bit to each bolt. However, I saw the bolts on parts that move have locking nuts so as stated, not really necessary. 2) The axles were taped in the package. This left sticky residue on the part where the wheels spin. I used goo gone to remove the residue and then spray cleaner to remove the goo gone. 3) To the axles I applied a very thin layer of Sil Glide. Not really needed, but it allowed the wheels to spin nicely. Final word of advice to anyone thinking about getting this hose reel: Get it. And get the hose too. And order the reel cover. I didn’t order the cover at first, but did once I saw how nice the reel and hose really is. I spent a lot of money on cheap ass, plastic hose reels over the years. They’re not really that cheap when replaced as soon as they leak, fade or break. And hoses too. The Eley hose is super high quality. IMO it is higher quality than heavy, commercial hoses you buy from industrial supply companies. Great products. Thanks Eley.
@javierc3229 ай бұрын
Where can I get that part? I have the same real need replacement parts
if only I had this growing up. What about on the other end, a quick disconnect for nozzles?
@EleyCorp10 ай бұрын
The same quick couplers work there, too. Our quick couplers are made with industry-standard 3/4-inch garden hose threads (GHT), so they will connect to any faucet, garden hose or watering tool in North America. www.eleyhosereels.com/products/garden-hose-quick-connectors
@robertfarrington515611 ай бұрын
I had to replace this piece on my reel, this video made it very simple, thank you!!
@JGumaJ11 ай бұрын
Bought one of you hose reels 3 or 4 years ago and mounted it to the side of the house. Still looks and works like it came out of the box! Love your products!
@atpgarageatl Жыл бұрын
I just placed an order for a hose reel! Looking forward to testing it out!
@michaeltablet8577 Жыл бұрын
Wonderful people making excellent products!
@deloresjones5310 Жыл бұрын
Love Eley products!
@glxxyz Жыл бұрын
You don't have Eley quick connects at both ends? 😱😂I have junk hoses so I remove the quick connects for winter to reduce galvanic corrosion. They get a dab of silicone grease in the spring.
@istt Жыл бұрын
Love it when things work the way they are supposed to. It was a snap. Thanks!
@TurfMechanic Жыл бұрын
Hey Warren, I'd love to have a conversation with you if you've got some time this week.
@EleyCorp Жыл бұрын
Contact can be initiated using one of the links on the following vendor page: www.eleyhosereels.com/pages/vendor-inquiries
@beverlyc.81752 жыл бұрын
Best hose reels on the market. Worth the money!
@RVLifeInRetirement2 жыл бұрын
I have dozens of your products. Highest quality hoses on the market. Love them!