Oh that is a gorgeous one. Zipper spiders are rare in kansas but they are absolutely excitijg to find. If i see one i always make sure to put a cricket or another kind of bug in its web to watch how fast it runs to it and wraps it up
@GrubNGas2 күн бұрын
I need to try that! lol! Thanks for the comments!
@PabloFlores-f6t3 күн бұрын
Appreciate the tip
@GrubNGas3 күн бұрын
No problem!
@PabloFlores-f6t3 күн бұрын
Appreciate the tip
@GrubNGas3 күн бұрын
No problem!
@kentrobinson79485 күн бұрын
Thanks man I'm gonna go buy one of these right now. Got to this part and couldn't fit anything on it i have an econoline so its even harder to get too. Was getting ready to take off the fuel bowl and hpop.
@GrubNGas4 күн бұрын
You’re most welcome, and I’m glad this video helped! Best wishes getting yours replaced!
@Makaveli7135 күн бұрын
So what you're saying 🤔 is,,, the wasp is like Chuck Norris in "Lone Wolf McQuaid" 🐺 unbeatable 😂
@GrubNGas5 күн бұрын
Right on! That’s spot on🤣🤣🤣
@HomesteadingHobbies5 күн бұрын
Great video thank u my ac works now !
@GrubNGas5 күн бұрын
That’s amazing! So glad this helped and thank you for the feedback!!!!!!!
@AlberVeloz6 күн бұрын
Do u know what size is that hose mine is leaking from there too
@GrubNGas5 күн бұрын
This hose size should be the right one (double check to be sure): amzn.to/3f1QSuU
@gadgetronica6 күн бұрын
This is the first video that showed me the part with the actual level and how to use the wood blocking. I'm a novice, too so I needed some reassurance I was doing it right. Thank you!
@GrubNGas6 күн бұрын
You’re most welcome, really glad this helped you! Take every safety precaution, and here’s to a safe setup!
@UpTheRepuplic-366 күн бұрын
Attacking their own cousins
@GrubNGas6 күн бұрын
Yup!
@tectonicfire16816 күн бұрын
Just a quick question does your truck have the center console rear vents?
@GrubNGas6 күн бұрын
Yes it does!
@tectonicfire16816 күн бұрын
@@GrubNGasthank you so much will be ordering this part in the morning
@GrubNGas6 күн бұрын
@@tectonicfire1681 you’re most welcome! Wishing you all the success in your repair!
@jayonez1378 күн бұрын
Great video. Doing this on my 2002 F350 today. Diesel Ron was the best. However, IPR video is literally the best one I’ve seen.
@GrubNGas8 күн бұрын
Thanks so much, friend, and I’m humbled. So glad this video helped. Ron is a legend…will always be thankful for his contributions to diesel truck owners.
@jayonez1377 күн бұрын
@@GrubNGas Went to Ford dealer today for my IPR. Reg price $674 My price with my Ford a account $462. WTF is going on! I remember these costing about $200-$225 just a few years ago when I replaced my ICP sensor. The guy at the dealership told me Ford recently updated the IPR part and the price went through the roof. Pissed 😡
@GrubNGas7 күн бұрын
@@jayonez137 whoa!!!! Are you kidding?????????
@nathancreel98669 күн бұрын
Sweet rig what did you end up paying for it and what did you put into it.
@GrubNGas9 күн бұрын
Haven’t put much in it yet…paid less than $1000 for it👍
@nathancreel98668 күн бұрын
@@GrubNGas awesome looking forward to this build.
@GrubNGas8 күн бұрын
@@nathancreel9866 appreciate it, friend!
@nathancreel98665 күн бұрын
@@GrubNGas blow the horns on the next video lol
@GrubNGas5 күн бұрын
@@nathancreel9866 will do, lol! The air leak kept me from it this time.
@tiffanymiller919310 күн бұрын
Yum I love blueberry and hibiscus together. They pair very well 🌺🫐
@GrubNGas10 күн бұрын
Agreed!!! And this water was very refreshing!!!!
@mchl811 күн бұрын
OK if this thing was sitting any duration ur pretty lucky . On the chance the rack being stuck wide open causing a run away effect. Other then that pretty good.
@GrubNGas11 күн бұрын
😬 You’re right, I should’ve checked that rack prior to starting it. Thankfully it didn’t run away!
@Blackout7511 күн бұрын
You are a life saver man! Thank you so much!
@GrubNGas11 күн бұрын
You’re most welcome my friend! So glad this helped you!!!
@patriciogonzalez768912 күн бұрын
Todo en ése motor fué hecho para durar 😂
@GrubNGas11 күн бұрын
¡Estoy de acuerdo! ¡Qué gran motor! Gracias por el comentario, amigo mío:)
@faisalalbaqami521713 күн бұрын
Does this distributor fits in f250 1995? 8:09
@GrubNGas12 күн бұрын
It should if it’s the same engine (5.8 351 Windsor) but definitely cross reference application and part number.
@lanajacknichols839714 күн бұрын
No fuel line clamps on that kit? I guess I’m doing it the redneck way I bought a roll of fuel line and matched up and cut each section by hand the put line clamps on the end of every line splice
@lanajacknichols839714 күн бұрын
No fuel line clamps on that kit? I guess I’m doing it the redneck way I bought a roll of fuel line and matched up and cut each section by hand the put line clamps on the end of every line connecting tee and L
@JaughnDough17 күн бұрын
I hope you saved that old condensor. I'm sure the Chinese one you replaced it with will fail within a week once you get it going. If it even works at all. It was probably fine, the old USA ones usually lasted forever.
@GrubNGas17 күн бұрын
Thanks for the comment. And yes, I still have it:)
@JaughnDough17 күн бұрын
I'm diggin that 1960s counter top. Don't change that man lol... everyone goes modern. Keep the vintage stuff alive.
@GrubNGas17 күн бұрын
Appreciate it! Yeah, that’s some vintage stuff for sure, lol!!!!
@DanEBoyd18 күн бұрын
I'd restore the whole GMC, and PowerStroke the Ford. I don't think the Ford chassis is going to like that big 6-71, and if I was going to rebody the GMC, I'd use an older GMC or Chevy cab and doghouse. That's just me though.
@GrubNGas17 күн бұрын
I like both of those ideas immensely! Yeah, I’d like to make the GMC a crew or something like that. And repower the Ford with a 7.3. Thanks for the input, friend!
@TheDeanGullberry18 күн бұрын
Chuck norris lost his virginity before his dad did.
@thatsallfolks739619 күн бұрын
I replaced the resistor part from autozone and blower motor but still runs continuously
@GrubNGas18 күн бұрын
Oh wow. How does the wiring harness look under the dash? Have you checked the blower speed switch on the dash?
@thatsallfolks739618 күн бұрын
@GrubNGas I still cannot controll speed, blower still runs full speed Harness has 5 wires connector. I currently rig it positive wire with a male female terminal so I disconnect every time I turn off the truck. Dash control show display luckly I can control climate temperature but cant slow speed or turn off.
@thatsallfolks739618 күн бұрын
@@GrubNGas autozone part #BMR004KIT
@GrubNGas18 күн бұрын
@@thatsallfolks7396 does it run even with the key off?
@GrubNGas18 күн бұрын
@@thatsallfolks7396 it sounds like the connector or wires is/are melted somewhere allowing the power to continue to flow to the blower motor.
@peterfriesen426321 күн бұрын
Just curious if this blower motor resistor is still functioning . thought I have the same vehicle and I have the same issue
@GrubNGas20 күн бұрын
It’s still functioning. I had to replace the blower motor later, but still working. Hope you have some success with yours!
@olegdiagilev-jb3jn21 күн бұрын
I have Ford 250 7.3 1995 obs it’s same engine?
@GrubNGas20 күн бұрын
Here is an article that does a better job than I could have explaining the differences between the 1995 7.3 and the 2002 7.3: dieselresource.com/diesel-resources/7-3l-powerstroke-specifications/
@lmalesci23 күн бұрын
greetings from Pontassieve province of Florence Italy I have a Suzuki Jimmy 4x4 van with a 1.3 lt petrol m13a engine from 2001 that I use to make dirt farm and forest roads and paths with 4/7 cm broken gravel and I go on forest roads where woodcutters pass with their forestry tractors such as skidders and forwarders and in my opinion the Suzuki Jimmy 4x4 thanks to its size the Suzuki Jimmy 4x4 goes into territories where larger 4x4 off-road vehicles have difficulty passing!
@GrubNGas23 күн бұрын
Greetings! Thanks for watching and dropping a comment! It’s impressive that a 1.3 liter can make so much power. I’d imagine it’s a narrow vehicle?
@chevygonzalez464625 күн бұрын
That dirt falling on the camera lens was giving my eyes PTSD…
@GrubNGas25 күн бұрын
I hear you on that!!! It’s painful to watch, literally!!!
@chevygonzalez464625 күн бұрын
@@GrubNGas 🥲🥲
@alexbaker996725 күн бұрын
Keep the ford ditch the chevy
@GrubNGas25 күн бұрын
I love that OBS Ford. Probably going to be kept in the family. Hopefully one of my kiddos will want it one day.
@alexbaker996725 күн бұрын
@@GrubNGas that's a fabulous idea
@alexbaker996725 күн бұрын
@@GrubNGas will there be more content on the OBS F250 crew cab 7.3 powerstroke???????
@GrubNGas25 күн бұрын
@@alexbaker9967 I sure plan on it! Hopefully do a repair video for each of the items on the to-do list.
@alexbaker996725 күн бұрын
@GrubNGas great I can't wait let's go!!!!
@michaelsedway970326 күн бұрын
Cab into the Detroit chassis
@GrubNGas26 күн бұрын
Nice! That would work!
@Wes80Rob27 күн бұрын
I know what I’m doing this week.
@GrubNGas26 күн бұрын
Right on brother!
@sexymarine2927 күн бұрын
My 2004 gmc sierra SLE 2500hd lb7 4wd duramax it's dripping too but now I'm gonna have to look there bc I had the turbo coolant return hose replaced serpentine belt replaced rectangular gasket behind the down pipe passenger side replaced both thermostats replaced and it's like chasing it down and losing like wtf it's running hot at times and it's bothering me when I need to add water daily to it to keep it from overheating overheating. How long is the hose and all
@trotter73ca29 күн бұрын
If the wall is plaster and lath, can you still use that hole saw to cut the hole in the wall?
@GrubNGas29 күн бұрын
I don't know if this would cut that...I think you might need a jigsaw or a reciprocating saw.
@trotter73ca29 күн бұрын
@@GrubNGas I did a bit of research and it looks like a cut out tool with a grout/tile bit to cut the plaster then switch to a wood bit to cut the wood strips (lath) attached to the plaster. Too much vibration (jigsaw or sawsall) and the blades catch on the wood and jolt it resulting in cracks and pieces of plaster breaking off. I'm getting a wood stove put in this old house and researching to make sure it goes smoothly. 👍
@GrubNGas29 күн бұрын
@@trotter73ca that sounds like a solid plan, and yeah, the jigsaw could cause a plaster split. Good call!
@mattcarey693019 күн бұрын
A hole saw will cut the plaster but it's really hard on the teeth. Just get a cheap harbor freight kit. I've cut tons of it with an oscillating saw for electrical work. I get the cheap bulk blades on Amazon since the plaster will wear the teeth off after cutting a few holes.
@GrubNGas19 күн бұрын
@@mattcarey6930 thanks for the advice!
@Fk8tdАй бұрын
Slight improvement but not massive.
@GrubNGasАй бұрын
Agreed. I’ve had similar success with Hot Shots fuel additives.
@mercury3actual12BАй бұрын
Interesting, i haven't seen that here. Thanks for trying, so I dont have to. Cold coffee i do often. Black no cream or sugar. Stay caffinated my friend. God bless always.
@GrubNGasАй бұрын
God bless you too, my friend! And yes, staying caffeinated!!!!💯🔥👊🏼
@lorettasearcy1471Ай бұрын
I don't mind being unpopular in this messed up 🌎.
@GrubNGasАй бұрын
Same here, friend!
@lorettasearcy1471Ай бұрын
@@GrubNGas And just because we live in this world 🌎 doesn't mean we have to be of this world.
@GrubNGasАй бұрын
@@lorettasearcy1471 spot on! Couldn’t have said it better.
@lorettasearcy1471Ай бұрын
@@GrubNGas Thank you for being so kind and having the same beliefs that I do. God bless you and your family.
@GrubNGasАй бұрын
@@lorettasearcy1471 thank you, and may God bless you and yours!!!
@lifeafterourlossАй бұрын
Nothing sounds like a Detroit engine! ❤
@GrubNGasАй бұрын
That is the truth!!!!!
@jlo1380027 күн бұрын
@@GrubNGas arctic cat 858
@jlo1380027 күн бұрын
Also the Rotax 850 Etec Turbo R in skidoos sounds awsome
@vincentsuzanne65153 күн бұрын
Any 2 stroke Detroit only engine that turns diesel into noise . Called bird scarer .
@GrubNGas3 күн бұрын
@@vincentsuzanne6515 that noise is intense! Love it though:)
@cristophervalenzuela3246Ай бұрын
I have a question, do I need to replace the harness to with blower motor or it could be just the blower. ?
@GrubNGasАй бұрын
I didn’t replace the harness, but you can. I’m sure it can be problematic.
@craigdeandean4036Ай бұрын
Thanks, man showed everything I needed very clear and concise!
@GrubNGasАй бұрын
You’re most welcome, friend! Glad this video helped!!!
@dennisingram6748Ай бұрын
I took a 1 1/8 socket and welded a handle on it. When done the handle can be removed and the socket is fine
@GrubNGasАй бұрын
That’ll work! Thanks for the tip!
@bryco32Ай бұрын
Had a 1997 F250 Powerstroke 4x4 from 1999 until 2010. I loved it. I bought it to haul our cj5 around 4wheeling, but it never got driven much. I drove it every day but only 14 miles a day. That was hard on it. Basicly, I had to keep a glove box full of ipr's and cps's in the glove box. I'd love to find another, but the dollar just doesn't have thw buying power anymore. Just finished the restoration on our jeep and have started looking at trucks again. Thanks for the video. Borught back a bunch of memories!
@GrubNGasАй бұрын
Oh wow, that was a long run to own one…I’ll bet you do miss it… Yeah, they are hard to find at a decent price anywhere…and inflation doesn’t help. Facebook marketplace is where I found this one. They get snapped up so fast though!
@GrubNGasАй бұрын
I sure appreciate the feedback and the view! Glad you enjoyed the video and hope you have a wonderful day!
@timschultztellstruthАй бұрын
Can’t wait for the full album in November! 😊😊😊
@GrubNGasАй бұрын
Same here!!!! Stoked!!!
@patrickomeara1898Ай бұрын
Best ac tutorial on the internet. Thank you sir!
@GrubNGasАй бұрын
You’re most welcome, thank you for your comment and for watching! Hope you have a wonderful day!
@CoryStembridgeАй бұрын
I was one of the first people to hear this song because before it came out it was unrealeasted they played it at Valdosta before it came out so I was one of the first people to here this
@GrubNGasАй бұрын
Rock on!!! That is so cool!!!
@TheBossLdi1Ай бұрын
I have an 07 Yukon, started noticing strong gas fumes, sometimes acting up when cranking after it’s been ran, then it’s an absolute nightmare to put gas in it. Takes forever. First thing I did was change the purge valve, then replaced charcoal canister, and blew out the lines. As my luck would have it, trying to put gas it in is still a a pain. At first the fumes went away, after driving it a few times, they are back and it still acts up after a warm start. HELP!!!!! I am going insane!!!!! I don’t think this really matters, but my Yukon is cammed and tuned etc, surely that has zero to do with my issue/issues. ANY help or recommendations would be greatly appreciated!
@GrubNGasАй бұрын
Oh man. That is a NIGHTMARE! Well, I know you probably have checked this, but is there a kink in the filler hose? Also I found this note on a forum: If it keeps happening, you likely have a clog somewhere, clear the vent line first in the filler neck and then the lines that go to the charcoal canister, might be full of charcoal all the way up to the valve on the engine. Here is the link to the forum: www.tahoeyukonforum.com/threads/gas-pump-keeps-shutting-off-while-filling.115804/
@TheBossLdi1Ай бұрын
@@GrubNGas I greatly appreciate it! Will check into this as soon as I can! You’ve definitely gained a subscriber!
@GrubNGasАй бұрын
@@TheBossLdi1 really hope this helps, and thank you for the feedback and subscription!!!
@sallyscustomworkshop4128Ай бұрын
Was the sylinoid itself loose in the brass holder??
@GrubNGasАй бұрын
I don’t remember to be honest…it could have been….
@Garage_BeersАй бұрын
Howcome didn’t replace lower control arm bushings?
@GrubNGasАй бұрын
I probably should have. Maybe a future video?
@Garage_BeersАй бұрын
Yeah maybe! I saw that its connected to the torsion bar… looks like an interesting process just to do the bushings
@GrubNGasАй бұрын
@@Garage_Beers for real!
@jameslovitt994Ай бұрын
I'm betting the glow plugs are getting weak, if they're even working at all.
@GrubNGasАй бұрын
Good point. Probably wouldn’t hurt to replace them.
@mericavidsАй бұрын
I bought a '84 GMC Brigadier the same color of blue, and it has the Silver 92 DETROIT and the corner windows. Changed all fluids, belts, batteries, and a steer tire. Painted it a brighter blue and made a custom visor out of a highway sign. Added 8 inch irrigation stacks, a newer air ride seat for the driver, and put the old air seat for the passenger. Tinted the windows and had some decals made to read 'BLUE BASTARD' and where I hail from. We enjoy showing it, working on it, and, of course, driving it full boar. I will follow along as you figure out your project.
@GrubNGasАй бұрын
Love this!!! Would love to see your rig!!!!
@mericavidsАй бұрын
@@GrubNGas my semi has DRASTICALLY changed from the first few vids to the last in the playlist. Let's see what you do
@GrubNGasАй бұрын
@@mericavids ok, I’m subscribing:)
@mericavidsАй бұрын
@@GrubNGasI subscribed too
@jlo13800Ай бұрын
I got a silver 8v92 motor to tinker with
@michaelkoon8371Ай бұрын
Sell the Chevy truck please I love me a ford Düssel