NotUrAverageMechanic

Пікірлер

@dpatterson3940 4 күн бұрын

Just wanted to say thanks this video just saved me

@bully1676 Ай бұрын

Part numbers and oil type would be nice

@suduntambi3068 2 ай бұрын

How many gallons goes in Please

@rickrana7150 2 ай бұрын

44 litres***

@abdulkareem67 2 ай бұрын

How come you didn't change the fuel filter & the water separator filter

@gregburgess6884 4 ай бұрын

Excellent job sir thank you

@Makeitsimple07 6 ай бұрын

Thats the crapiest truck ive ever seen lol i thought my truck was bad lol 😂

@jefferychambrovichjr6681 6 ай бұрын

How many hours do you go with oil changes?

@Vater1 7 ай бұрын

Where you get the tank from ?

@domonickpoullard5963 8 ай бұрын

What prompted you to change those injectors?

@ReggieTwine 8 ай бұрын

Great video will that work on the dual overhead cam isx engines

@zachariah96 10 ай бұрын

Below average mechanic lol

@maxenra 10 ай бұрын

Did you not prime either after changing?

@Nhanle-mr7jv 11 ай бұрын

Cái này mua ở đâu

@jeffreyweston900 11 ай бұрын

In your estimation which is better the single cam or the dual cam cummins!

@northbaygroup9073 Жыл бұрын

Thanks bro. Solid work

@alexlopez4035 Жыл бұрын

Thank u 🙏

@100mphFastball Жыл бұрын

Does the plug lock?

@noturaveragemechanic7121 Жыл бұрын

Oil drain pan in the newer paccar engines does, yes. Just short little twist and its locked in. Older ones are a standard plug

@steevelaplante9432 Жыл бұрын

the video was not about a tank replacement ??? i only saw a old broken tank and a new install tank...

@ivanlomeli1272 Жыл бұрын

Love the video...is there a way i can contact you, im having the same problems with my isx15 cm2350. coolant in the water separator. its been diagnosed already and they said it was fuel injector #1 and #6 thats leaking coolant from the injector cups...but they dont do this kind of job with the rings.

@noturaveragemechanic7121 Жыл бұрын

Hi. You can contact me at [email protected]

@ivanlomeli1272 Жыл бұрын

thanks

@farhad_222 Жыл бұрын

Hello Friends, I have a daf model 2020 mx13 engine, engine retard. Why does this engine damage the valve stem, and I have seen several cases that their valve stem also breaks quickly, and this is a weakness for this engine. Is this weakness due to the construction of this engine or is there a reason that causes this problem, please guide me, this is a problem. The second question is what type of oil is suitable for this engine. Thanks

@noturaveragemechanic7121 Жыл бұрын

Hello sir, are you talking about the exhaust and intake valves? We use Dello 400 across the fleet as that is the factory recommended oil for some of our trucks. You will need to check your owners manual for the best oil.

@farhad_222 Жыл бұрын

@@noturaveragemechanic7121Hi dear friend I mean the camshaft, my car's engine is a retarded 3-stroke engine. My mechanic opened the engine and said that you used too much retarder in the engine. MX13 engine, you should not use a retarder in the engine because the camshaft will break quickly. with regards

@leroyramsay6225 Жыл бұрын

Very Information keep up the good work

@LEE2ER Жыл бұрын

Didn’t torque it down. Didn’t check clearance after installation and didn’t use new bolts for injector hold downs. Yikes.

@noturaveragemechanic7121 Жыл бұрын

Clearance no, new bolt, no. I did torque it later but completely forgot to film it. I'm out here simply trying to help owner operators and small time mechanics get a job done

@LEE2ER Жыл бұрын

@@noturaveragemechanic7121 those bolts stretch out after one use/torque down so when you torque it down again it’ll be at the wrong spec. If you checked clearance you wouldn’t have to do it twice. Just trying to help bud

@joseramos3669 Жыл бұрын

Well explained.

@marcelinoneto6781 Жыл бұрын

That one is an x15 man,isx don't have fuel rail....

@Keith-jp6jw Жыл бұрын

ISX after 2010 was common rail.

@raffaelenormando9920 Жыл бұрын

Very nice presentation Thank you

@BibinRCBabu Жыл бұрын

Well done

@gilbertgutierrez9957 Жыл бұрын

We need more video man !

@sheikhdaif4608 Жыл бұрын

Do you have to release the pressure before draining the fuel filter? Because I started to drain it but there is no end fuel keeps going. After two gallons of diesel I stoped the drain.

@noturaveragemechanic7121 Жыл бұрын

I've never come across an issue like that. You might want to look into that. Constant fuel suction sounds Interesting

@philliphall5198 Жыл бұрын

Dang I hate being retired sometimes. Miss it alot to

@philliphall5198 Жыл бұрын

Cool. I got the cam special tools and just to old to keep working but I teach it

@antoniobermudez4989 Жыл бұрын

So to seat them is 77 and then 30 and then 60. I think that’s a lot torque. Are sure is 77 then Loose it and then retorqued at 30, 60.

@shanecusimano6178 Жыл бұрын

77 inch pounds. And then 30 foot pounds and then 60

@jacobblevins8956 Жыл бұрын

Should have sucked the excess fuel and water outta the cylinder that’s what that first hard start was. Very hard on everything

@emmanuelperez1857 Жыл бұрын

I just get 6 at Cummins. Part # 4312298 Ring, retaining

@bronsonherity1118 Жыл бұрын

After I installed rings my truck idles at 1000 rpm now and suggestions

@Elseve23 Жыл бұрын

which one is the injector one?

@andrewroebuck6205 2 жыл бұрын

That’s a lot of truck for not a lot of tools

@noturaveragemechanic7121 2 жыл бұрын

I only service our own trucks so there is a lot of space that I don't use.

@adanponce4401 2 жыл бұрын

Thank you much for the well done video!! in case you need to remove it to replace the cup when the ring doesn't fix the problem How would you do it? is there a special tool?

@noturaveragemechanic7121 2 жыл бұрын

I have never had that happen to me. If this ring didn't fix the problem it usually ended up being the head gasket or other issues in the head so I replaced the whole head. I do not know if there is a tool to pull them out.

@adanponce4401 Жыл бұрын

@@noturaveragemechanic7121 Thank you much for your reply I found two companies that make the tool to remove the original cup without removing the head. one is call Irontite, and Industrial Injection services i dont know if this will help in any way I installed all 6 rings truck will leave on a short run for testing purposes i hope i fixed the problem thank you again

@manuelmoreira9896 Жыл бұрын

@@adanponce4401 hey adan I installed the ring but still getting coolant in fuel what did you ended up doing thank you

@adanponce4401 Жыл бұрын

@@manuelmoreira9896 my truck is still running strong since I installed the rings Last week I notice very little coolant in the water separator…. For the first time since the repair Truck has 1.1 mill miles … I think it’s time to do an overhaul Unfortunately the rings are not a definitely fix Good luck

@manuelmoreira9896 Жыл бұрын

@@adanponce4401 thank you for the response how long it's been after you installed the ring ? I did an imframe to my engines 3 Monta ago did not put a new head I only had it rectified at the machine shop I agree I think rings may not be best option in the long run I think I ll.justndo the injector cups to be done with it

@norb0254 2 жыл бұрын

The centrifugal filter is being deleted now in the uk ./europe No longer needed

@noturaveragemechanic7121 2 жыл бұрын

That's good information to have. Thankyou

@alexeckman5542 Жыл бұрын

I don't even change it anymore damn things a pain to get out

@JewsSuck-yw8fb Жыл бұрын

@@alexeckman5542just smack the ground and itll pop right out

@yamahaking6137 2 жыл бұрын

I never add anything into the oil.. I have been using shell T6 never had any issues burning oil or whatever.. stay away from delo junk

@noturaveragemechanic7121 2 жыл бұрын

I'm doing the best preventive maintenance I can since some drivers don't actually care or check up on anything

@alw7810 2 жыл бұрын

Watch Project Farm on KZbin test Lucas and the results be shocking 😳

@smellfunny1864 11 ай бұрын

Bob is the Oil Guy as well. All though the test he had will not pull up any longer.

@sodbuster518able 2 жыл бұрын

According to Pacar recommended practices your never supposed to pour unfiltered fuel into filter body, use hand primer only to draw from tank through to the filter.

@noturaveragemechanic7121 2 жыл бұрын

While yes that is true I do this for a small fleet and I do things quickly. It takes a long time to draw into the filter housing using only hand pump

@sodbuster518able 2 жыл бұрын

Sometimes short cuts don't pay off when we're talking tight tolerance parts that contaminants in fuel can wipe out expensive components in these high pressure fuel systems, 5 microns can't be seen with the naked eye.

@sodbuster518able 2 жыл бұрын

170 primer strokes is cheaper than thousands $of destroyed fuel ⛽ injectors and high pressure common rail pumps

@edjahman 2 жыл бұрын

If you do the one on the frame first then the primary, you don't have to pour anything in.

@sodbuster518able 2 жыл бұрын

The 22 model 579 with the MX13 no longer have frame mounted fuel water 💦 separator, only 2 filters in module on engine.First filter had high restriction at 9,000 mi on brand new truck.At 67000 mi haven't had First oil change yet but already 4 fuel filter . Fuel algea already started from transport buying cheap southern fuel.

@sodbuster518able 2 жыл бұрын

That truck looks like a lot of engine idle hrs on it for the mileage on it

@johnferra5667 2 жыл бұрын

Did you have to program the injector?

@noturaveragemechanic7121 2 жыл бұрын

No I did not

@miguelstiresandtruckservic2399 2 жыл бұрын

Very helpful...

@judah0916 Жыл бұрын

Quick question...Im about to install a " USED" INJECTOR...do I have to re-program it into the ECM?? Or input the numbers of the "USED" INJECTOR into the ECM?

@Keith-jp6jw Жыл бұрын

Just send er bud.

@jeffjohns426 2 жыл бұрын

I ran the serial number on the engine and it came back as not needed. So this is ISX specific? The ring is a recall on these motors.

@germandarioorregoalzate4973 2 жыл бұрын

cuando se cambian los inyectores, se calibra freno de motor?❤

@noturaveragemechanic7121 2 жыл бұрын

Solo cambio los injectores cuando terminan su tiempo y ajusto el freno de motor cuando ajusto los valves

@germandarioorregoalzate4973 2 жыл бұрын

@@noturaveragemechanic7121 exelente, que bien 👍👍 siempre que subas tus videos los veo muy interesantes saludos desde colombia 🇨🇴🇨🇴🇨🇴

@mahamedcade10 2 жыл бұрын

I have the same problem with ixs engine. I found it out today. Thanks buddy

@manuelmoreira9896 Жыл бұрын

@usaauto76 2 жыл бұрын

I have a 04 isx 565 and I'm getting fuel in coolant is that the same problem rings

@noturaveragemechanic7121 2 жыл бұрын

I personally have never had the issue and don't have the knowledge to answer that. It seems like it's possible though.

@Macantaya 2 жыл бұрын

I stopped watching when Lucas came up 😩

@morgancolvard5577 10 ай бұрын

You probably don’t use full synthetic either loser

@theluckyfew8701 2 жыл бұрын

Were can I locate these rings

@noturaveragemechanic7121 2 жыл бұрын

Online. Cummins doesn't build them anymore

@theluckyfew8701 2 жыл бұрын

@@noturaveragemechanic7121 they are still out there found them and the same tool for cheaper

@gatush 2 жыл бұрын

Cummins

@bradgoliboski9006 2 жыл бұрын

What’s the torque spec on the ring when installed ?

@gatush 2 жыл бұрын

77inch lbs 1st turn 30lb and then 60. And 60 on the quil tube

@RussellRobinson971 2 жыл бұрын

On another video, the mechanic was measuring the seat depth of the ring from top of the injector opening. Supposed to be a minimum of 69mm.

Ең жақсы KZbin

Пікірлер