Utilizo pinturas acrílicas a base de solvente PaveCoat Cure & Seal de Nutech, espero que esto ayude

No more gaps , Gap Filler

@samcopaintinganddecorating thank you. I painted my bathroom sash windows, your video gave me a lot of confidence.

Selleys 10L Generation ll Point Works

@samcopaintinganddecorating Thanks mate 👍

It is a high-performance epoxy floor coating!

Thank you! Cheers!

Thanks!

thanks

Full Boar 125mm Double Row Diamond Cup

It's still looks very good after 4 years.It's my friend house roof

10% floetrol is the way to go add water only when is to hot

👍

Farba za krov krovna membrana

Gun CGPDG5010 5,000 psi pro gun

depending on specification on job is sikkens [email protected]

Mark IV HD 3-in-1 Standard Series Electric Airless Sprayer, 230V

There is no cracks have beret luck

Yes there is depending what you wont to paint the one in video is roof membrane paint for steel, concert and terracotta roofs.

prețul pentru pulverizator este de 8,58900 USD

NO it is roof membrane This roof membrane has a dry film thickness of 66 microns per coat, which is almost three times the amount of a regular coat of paint.

GRACO Mark IV HD 3-in-1 Standard Series Electric Airless Sprayer

Not aloud heritage job

YES it is top of the shelf primer undercoat

To hot bro ,

Tileguard® Maxi Prime A new concept water based acrylic co-polymer Primer, incorporating Nano technology, designed to deeply penetrate oxidized cement roof tile surfaces and bind any free powder prior to top coating. Its excellent adhesion makes it particularly effective as a key coat for most rust-free metal roof surfaces. www.regentpaints.com.au/

All bedding material should be laid in accordance with AS2050 (Installation of Roof Tiles) and allowed to air cure until set, before application of tile pointing can commence. The installation methods described in this Standard apply to tiled roofs of buildings that are intended for domestic, commercial or light industrial purposes for wind classifications N1-N6 and C1-C4. Tile pointing products should not be used to fill thick beds or blobs. If you were to use it instead of a mortar bed, the pointing will dry without issue, but the blob behind may have issues drying long term. While a good quality Tile Pointing product will have good adhesion properties, if it’s too thick (more than 5mm) it could cause setting issues. Groves in bedding help bonding. During the bedding process, creating a groove in the bedding material under the ridge tile will enhance the mechanical bond of the tile pointing. Do not add water to your tile pointing product. Instead, re-stir periodically through application. When not in use, replace lid on bucket. Seek out the tile pointing product in your colour. If there is none available, a good hardware store will make available special orders. However, if you are going to paint over it, allow at least 24 hours prior to painting after the original installation. Allow for more time where humid or cold conditions are present. Some quality features to look for in a Tile Pointing product: Selleys 10L Neutral Generation ll Point Works Dulux Acratex® Roof Pointing Roofbond Flexible Pointing hope this helps

It is repainting filling holes and gaping before painting ,

Adjustable depending on what I'm washing

60 grit sandpaper

UNi-PRO Smooth Coat Synthetic Wall Brush Range,Zinsser Peel Stop White Triple Thick Interior/Exterior High Build Binding Primer works best for bathrooms and laundry

Can i use oil based topcat paint?

@@zacj63 yes

@@zacj63 yes

Thank you! 🙂

415

A roofing membrane requires a minimum tip size of 0.023” (23 thou) and the motor and pump to handle moving that thick ol' paint up 30m (minimum) of hose vertically onto a roof! This stands well beyond the reach of these humble DIY sprayers. You can use this spray guns: QTech QT290 Airless Sprayer The QTech QT290 is a great choice for common medium-viscosity water or solvent based coatings and roof membrane spraying. Mark V XT HD 3-in-1 ProContractor Series Electric Airless Sprayer, ANZ/KR

NO

rubber shush

For a seamless, water resistant and long lasting finish, James Hardie™ Base Coat

Depends

yes it is

Glad you liked it!

no

Probably not

A weep hole is a nail-sized hole in the top ridge pointing to a tiled roof. They are made every 30cm along the ridge pointing. These holes allow water to escape. As a result, the ridge point stays dry. It is crucial that ridge pointing remains dry because the bedding holding this part of the roof together is cement. Cement, although strong, is porous, which means it has lots of little holes in it, allowing water to soak in. When water soaks into the concrete, it accumulates and results in cracking and other issues.

Bedding refers to the setting of the mortar that sits beneath V-shaped roof tiles. It is essentially, the first foundational layer that keeps the ridge caps and roof tiles fixed. Without bedding, the roof tiles will not be secured tightly and held in place.

A weep hole is a nail-sized hole in the top ridge pointing to a tiled roof. They are made every 30cm along the ridge pointing. These holes allow water to escape. As a result, the ridge point stays dry. It is crucial that ridge pointing remains dry because the bedding holding this part of the roof together is cement. Cement, although strong, is porous, which means it has lots of little holes in it, allowing water to soak in. When water soaks into the concrete, it accumulates and results in cracking and other issues.

Hmmmmm, good for you.