Great video do you only apply the Beard butter in the mornings or at night? And how long of growth is this in the video?
@ftwbeard173020 сағат бұрын
@bubbamalone6063 thanks! I only apply beard butter after I shower. It does a good job of staying in my beard all day. It's hard to say on the length of growth since I've had a beard for many years. I have a bad habit of trimming the length when it starts getting in the ways, like getting caught in zippers. I'm trying my best to not trim it. I haven't trimmed in in about 6 months.
@bubbamalone606320 сағат бұрын
@@ftwbeard1730 ok so I'm growing mine at the moment but I do have patchy areas any advice on growth in those areas I'm thinking about trimming to make it even...
@ftwbeard173020 сағат бұрын
@bubbamalone6063 often times the patchy areas will fill in over time. When I first started growing I had patches but now I have hair halfway up my cheeks. I still notice new growth on my cheeks since I stopped shaving in a line.
@carson9115 күн бұрын
This is how you make a video. Thanks brother.
@biglike79819 күн бұрын
2015 4Runner in rust belt here. The entire trunk window assembly is rusted completely through. Surprised the rear window hasn't just collapsed into the door. Can't use trunk back window anymore. As mentioned that rear trunk area always stays wet and pulls in road debris when driving. Rear brake lines completely rusted and burst causing a complete failure of the braking system. Have to drop the fuel tank to change them due to how they're routed. Spare tire ridiculously rusted. Power steering line rusted out and leaking. Rear trunk lock, I'm on my 3rd one. They keep rusting out and failing. Great vehicle but there should be recalls from Toyota to have this vehicle spray coated. If you own one do yourself a big favour and spray coat it with rust protection every year, especially inside the trunk back door. Incredible Toyota has been making the same 5th gen truck for so long and have not addressed these issues. I guess they want you to just buy another one.
@wbathrick9 күн бұрын
Love it! right to the point, no BS speeches ! What the make and model of the suppressor youre using again?
@ftwbeard17309 күн бұрын
@@wbathrick thanks! Running a dead air wolfman...its a great versatile suppressor.
@briansaiditsoitmustbetrue420612 күн бұрын
Warning truth ahead... It may offend "Skin-skinned" individuals... Most men (More than 90%) can grow a beard... They tend to be grown by "Chrome domes" Your "Upside down" head is been giggled at behind your back... I just wanted to let you know.
@yivo999617 күн бұрын
Did you have to remove the handguard? I wish the tutorial actually recorded the process.
@scottbrice845120 күн бұрын
I wish you would of shown the entire process since you said it was so easy. Ive done what you said and the shroud of faux suppressor unthreaded from itself. Front piece with holes in it does will not budge
@JayP767621 күн бұрын
I actually found a tool at Harbor freig” PITTSBURGH Adjustable Pin Spanner Wrench “ that you use to switch sanding/cutting disk for $6 & I didn’t have to take off the hand guard. I just laid my ZC Scorpion on the floor with the grip away from me and adjusted the tool accordingly to fit the two holes on the tip of the barrel shroud, supported the gun firmly and pulled the tool towards me and it came loose with ease within 2 seconds. Plus I didn’t have to take off the hand guard .
@JayP767623 күн бұрын
How hard was it to take off?
@ftwbeard173023 күн бұрын
Mine came off easy with the strap wrench.
@JayP767622 күн бұрын
@@ftwbeard1730 would it be easier to take off the plastic shroud as suppose to just putting the strap of the tip of the barrel shroud?
@sheliametcalfe23 күн бұрын
Nice
@eddiebaida881323 күн бұрын
Great video thanks!! I been trying for a couple days. Got a Mojave myself want to order a compensator what’s the barrel thread if you don’t mind sharing please ?
@venetiancatАй бұрын
Thanks so much for this video!
@JohnnyBGoode215Ай бұрын
Can't hear you.
@ftwbeard1730Ай бұрын
Huh...?
@evanmorgan3573Ай бұрын
Did you have to remove the handguard first, or did you get enough purchase with the wrench to remove it as-is?
@ftwbeard1730Ай бұрын
No need to remove the hand guard.
@FNWendigo2 ай бұрын
Thank God
@IvanDjuric3002 ай бұрын
Damn I thought you’d catch your arms under the bar there.
@ftwbeard17302 ай бұрын
Yeah...I like laying my arms out straight when I use the buffalo bar.
@oakridgereview13592 ай бұрын
Mines got a retarded amount of blue locktite on it... i need a small torch. Strap Wrench slips right around the damn thins
@MarioWilliams-qu4qv2 ай бұрын
How long have you been growing your beard long
@ftwbeard17302 ай бұрын
Years..at least 15
@bbracey12202 ай бұрын
Helped out 100%!!!!!
@ltrain70222 ай бұрын
Do you prefer conventional straps over figure 8s? I use both and I'm undecided. I deadlift today so watching this set for motivation. As usual, strong work man.
@ftwbeard17302 ай бұрын
I really like the figure 8's but the ones I have are a little too big and haven't gotten around to getting a smaller pair. The only drawback is that you are locked in with the figure 8's. I like the regular ones because you can just release your grip and they let go. Im hoping to work up to a 1 rep set in a few weeks of 635-655...not bad for an old man..lol!!
@imkeerock2 ай бұрын
Awesome! Thanks!
@elmerfudd76742 ай бұрын
Bought one of these for my girlfriend. Absolute POS. Will not cycle properly with high velocity hollow point ammo. Called Bergara they said its a target rifle meant for standard velocity ammo. Didn't say that anywhere when I bought it. Gonna use it for a tent stake and go buy a Ruger.
@ftwbeard17302 ай бұрын
Totally agree...I've built a few custom 10/22's. Much more reliable. Most recent one has a fletcher open top reciever...much easier to clean.
@mr.martyr85732 ай бұрын
Im pretty dissapointed in this rifle. The Ruger 25 mags fuckin blow, the cycling issues are horrific, and for the price.....I most certainly wouldnt buy another one. The CCI "Suppressor" rounds seem to do a little better but its still pretty unrealiable in my experience anyway.
@ftwbeard17302 ай бұрын
I would agree...I got rid of it. I just built a 10/22 with a fletcher open top reciever with volquartsen bolt, kidd two stage trigger, ruger target lite thumb hole stock and bull barrel. So far it cycles great.
@mr.martyr85732 ай бұрын
@@ftwbeard1730 Nice build man. I think im going to ditch this Bergara as well. Had high hopes but its been pretty unreliable ever sense ive had it. Its incredibly quite suppressed but i guess that dont mean shit when you can only get it to cycle every other round. Lol
@TheLovinjourney2 ай бұрын
what year is this.truck
@countyline812 ай бұрын
Wool wax and fluid film are your friends
@mixdbyjoshua56213 ай бұрын
Did you have to remove the hand guard first?
@ftwbeard17303 ай бұрын
Nope.
@beckderm3 ай бұрын
EZ Rail - Beretta MK III- for 92/96 FS Models
@ariz82813 ай бұрын
So im having a different issue. I dont want the faux suppresor off but i notice when shooting it starts to come loose and i keep having to retighten it with my hands when i get home. I also didnt need to use any type of tool to get it loose for some reason im able to just untwist it with minimal strength and it will come off easy… any suggestions ?🤦🏽♂️
@ftwbeard17303 ай бұрын
Any suppressor, fake or not will loosen up from the jolt. You could put some blue thread locker on it. The blue will come off if you want it to later.
@TheDaixlen3 ай бұрын
Nice form! how heavy was that? looks heavy
@ftwbeard17303 ай бұрын
600
@SQUAREDCIRCLE-dv5fw3 ай бұрын
It looks great, must be awesome hanging out in there at night with the view and sounds of the woodland
@ftwbeard17303 ай бұрын
Thanks!! Yeah..definitely one of the benefits of living in the country!
@Hikerhikeshikes193 ай бұрын
I’m looking at buying this for my girlfriend’s 2018 crosstrek. Is your hitch an OEM hitch? She’s getting an OEM hitch installed first.
@ftwbeard17303 ай бұрын
It's an oem hitch.
@johnpina55263 ай бұрын
Thank you
@The_Big_Soup33 ай бұрын
Does taking it off put the barrel under 16 or exactly at 16 if you know?
@ftwbeard17303 ай бұрын
My barrel is just under 8 inches
@The_Big_Soup33 ай бұрын
@ftwbeard1730 ohh I gotcha. Thanks man! I bought the 16.3 carbine but want the faux suppressor off
@ftwbeard17303 ай бұрын
@The_Big_Soup3 it's threaded into the front of the barrel so the faux suppressor doesn't add any extra length.
@The_Big_Soup33 ай бұрын
@@ftwbeard1730 oh sweet thanks bro!
@davethomas51922 ай бұрын
Dude mine will not budge at all
@hoehlentroll693 ай бұрын
1:28 skips the whining
@RealityCheckGA3 ай бұрын
Good deal
@jaredrowland59123 ай бұрын
Thank you ! I’ve been trying to get my off for weeks
@user-vm5ru8ys6z3 ай бұрын
Thank you for this video
@chrisnozisko83173 ай бұрын
How did you get the front part off? Did it come off in one piece? I got the shroud to come loose but the front end cap won’t move.
@ftwbeard17303 ай бұрын
Mine all came off in one piece.
@chrisnozisko83173 ай бұрын
@@ftwbeard1730F*ck. I was afraid of that. Thanks for the help though!
@ftwbeard17303 ай бұрын
@chrisnozisko8317 I would put a set of vice grips on that piece. I'm sure, like me, you aren't going to put it back on. If the strap wrench didn't work I would have used vice grips on it.
@chrisnozisko83173 ай бұрын
@@ftwbeard1730Not a bad idea at all. I will keep you posted . Thanks again
@chrisnozisko83173 ай бұрын
Had to go to a gunsmith who adlibbed a tool to torque it off. 🤦🏼♂️
@StealthJackson12B3 ай бұрын
Been trying to get this off for the past 2 weeks! Salute to you.
@ftwbeard17303 ай бұрын
Im sure it all depends on how much thread locker they put on it. You could try heating up the threads and then put a strap wrench on.
@StealthJackson12B3 ай бұрын
@@ftwbeard1730 I have to get a strap wrench first and then I'll try it with my heat gun it fails to loosen.
@emidyl243 ай бұрын
I'm late to this vid, I see a Virginia plate so they are considered as a rust belt state, gets salted roads I believe. 10yr old car at time of this video so untreated will def show rust, not surprising after such a lengthy period. Those living in rust belt know that yearly undercoating preventative maintenance is way to go. Got nothing to do with design flaw.
@martinaguinaga2593 ай бұрын
my 2 cents, your video mediocre at best. I ponder was it too cold for you to actually show how this spare tire carrier works. is it really that difficult to remove the trailer hitch so the arm swings down? I don't know why you wouldn't show how it actually works. Like, then what's the point of the video?
@ftwbeard17303 ай бұрын
There is no point..I wouldn't even say it's mediocre...so that's a step up.
@ralliartstyle4 ай бұрын
Most definitely not true about the Stealerships and information. My stealership gave me all the info i asked for.
@Ishootfilm4124 ай бұрын
What’s warmer
@ftwbeard17304 ай бұрын
Camo jacket.
@user-kc1zy1zd1m4 ай бұрын
When youre sweating your ass off they wont slip off
@wannas55724 ай бұрын
i think that would work on my taurus pt-99
@ftwbeard17304 ай бұрын
Should
@robertippoliti51864 ай бұрын
thanks for the info
@user-sp1ig3mh1e4 ай бұрын
Awesome toys you have man 😮
@ftwbeard17304 ай бұрын
Thank you..and they keep growing somehow!
@tomquinn11924 ай бұрын
I've run into the same problem even on my 2010 Forester with the boys at Discount Tire. I've never had this problem with other makes, but it seems like the OEM Subaru studs are softer than normal.
@v1n06204 ай бұрын
Is that the discreet carry clip? And does it stay clipped on the pocket if you wanna just draw the blade itself?
@ftwbeard17304 ай бұрын
It works perfectly!
@DapperYu4 ай бұрын
The main 3 things I’ve learned with the beard journey is 1. Genetics 2. Health/Diet and 3. Everybody beard is different and grows differently so you can’t look or worry about others yours is yours! Good advice of not looking in the mirror too!