Once a year i need to do this and your video is the only resource i find myself needing. Thanks again!

Lol

Song it garnish the chrome arms?

Great help! thank you!

Cheers ! Great video

brilliant repair with Northern Soul in the background!!! Keep the faith

The video is NOT clear at the most important moment: when the case is separated at the front at the clear plastic. Many folks asked below - but no answer. A clear, step by step video of the separation process would make this a great video.

Thanks so much, excellent instructions and nice music too 😊

good job

Good video, keep the faith !

Thank you so much ! I’ve managed to do it all by myself 😅 super proud thanks to ur video

I appreciate what you did here and how thoroughly you took the Turboteq head apart, but it didn't escape notice that you already had the wheels off, which are NOT easy to remove. In fact, using a kitchen knife for prying and disassembly causes damage to the wheels and/or surrounding plastic.

Thanks for your help! Very clear instructions.

Is this just water that's in the tank? No other solution?

Thank you so much! I’m from AUS, what screw driver do I need to unscrew them??

Perfect - thank you. All done and proper job done now.

Thank you!!! Thanks to you I fixed it in less time than it would have taken me to find a repair shop. The scary bit was trying to separate the top and bottom plastic bits without breaking the plastic. Once I got that, the rest was a piece of cake. Bless you!👏👏👏👏👏

Thank you for your help, I did a lot more cussing, but your video got the vacuum fixed.

I deal with this at least once a week, i can do it with my eyes closed..

Thank you!!!!!!!!!!!!!!!!!!! 🎉👏🤘

Thank you

Your video is the only one I’ve seen that actually explains how to pop the top cover off easily. Thank you so much! I popped mine open, cleaned it thoroughly, and it was so easy.

Thank you!!! This was so hard and we couldn't have done it without you. 🙂

Brute force to get the top off after saying a prayer. Successful clean but I found a small tack had become lodged and stopped the fly wheel from turning.

I can not get the front edge un-clipped from the clear plastic window for the life of me.

Can I ask what are those white things holding the drive belt? I cracked mine.

From the bottom of my heart...thank you very much..for your sincerity, simplicity and generousity...great man..❤😊.....I did it..and it worked out.. by now I could do it again, after went scared and thought to had to buy one new one by throwing away the opened one...🎶🎶🎶👍👍👍🍀🍀🍀🙏🇮🇹

Brilliant!!! I really needed this...and a groovy northern soul soundtrack in the background 😂

Thanks a bundle! 🎉 I was ready to throw the thing away. What a stupid design. I have two other motorbrush vaccuum cleaners, one Dy Son and one Chinese robot vaccuum. They both are very easy to (dis)assemble with latches. The robot also has this great little (safe)tool to cut away hair that’s all wound up. The Miele is very disappointing… very loud as well this turbo driven head.

I CANT SEE ANYTHING

Super helpful, THANK YOU

Thank you - fantastic teardown step by step. I was able to totally clean the inside my hoover as a result.

Thank you for the video from the San Joaquin Valley in California. I was struggling to open up the head to clean up the brush. This gave the information I needed.

Nice video. What is the size of the hex head screws? I need to clean the roller brush.

Thank you!

How to get the top head out. It's killing me. I can't do it

Any more clues on how to do the brute force detachment bit without breaking it after you have the 6xT10 Torx screws out? I can't get past this point. You started off by prying with a screwdriver and then you just pulled. I've been prying with various screwdrivers and pries to try and push it past the clips, but I get severe distortion in the plastic, and no kind of willingness to go past the clips by pulling. And the clear plastic is too stiff to push the clips in far enough to pull.

Thank you!

Excellent video, thanks very much. It was nice to see it done on a dirty piece of equipment rather that a fresh “out of the box” one. I had more trouble getting the head back on than anything else!

Thanks of much for this easy to follow video! Had a small stone stuck in the housing for the belt that was keeping it from spinning!

Perfect. I could open and clean the head of vacuum with this video. Much appreciated...

Awesome!! The only struggle was the front clips. One they were apart it was EZPZ. Thanks for the excellent tutorial.

Just wanted to say thank you- great video - like others said hardest bit was seperating the head - just gotta trust it dosent break and really pull them apart

I would like to know where I can buy these red bristle brushes to replace. I couldn't even find it on amazon

Much appreciated:)

Thanks for the video. I wonder if you have a site you can recommend for parts? The roller brush bracket (ref 5:33) has broken and I can't find one for love nor money...

glad this was still online!!! worked like magic - again Thank you.

Binned already. This head is worse than those of cheaper brands

Thanks for taking the time to do this video very helpful 👍🏻

This would be been brilliant if you could actually see half of it!